1. Safety Instructions
Please read these instructions carefully before using your Behringer HC 2000 Studio Monitoring Headphones. Keep this manual for future reference.
- Hearing Protection: Prolonged exposure to high volume levels can cause permanent hearing damage. Always set the volume to a comfortable level before putting on the headphones.
- Cleaning: Use a soft, dry cloth for cleaning. Do not use liquid cleaners or aerosols.
- Water Exposure: These headphones are not water resistant. Avoid exposure to water or moisture.
- Disassembly: Do not attempt to disassemble or modify the headphones. This will void the warranty and may cause damage.
- Storage: Store the headphones in a cool, dry place when not in use.
2. Product Overview
The Behringer HC 2000 Studio Monitoring Headphones are designed for critical listening and monitoring applications. They feature a closed-back design for excellent sound isolation and 40 mm dynamic drivers for a wide frequency response.
2.1 Key Features
- Compact studio monitoring headphones.
- 40 mm dynamic drivers provide wide frequency response (20 Hz - 20 kHz) delivering full bass and detailed highs.
- Exceptional sound quality combined with portability.
- Closed-back design ensures consistent listening environment with exceptional sound isolation.
- Compact foldable design with comfortable padded ear cups and adjustable headband.
2.2 Package Contents
The Behringer HC 2000 package includes:
- Behringer HC 2000 Studio Monitoring Headphones
- 3.5mm audio cable (permanently attached or included, as it's wired)
- 6.3mm (1/4") adapter (commonly included with studio headphones)
Figure 2.2.1: Front view of the Behringer HC 2000 Studio Monitoring Headphones. The headphones are black with the Behringer logo on the earcups and an adjustable headband.
Figure 2.2.2: Side view of the Behringer HC 2000 headphones, highlighting the comfortable, padded over-ear earcups.
3. Setup
3.1 Unfolding the Headphones
The HC 2000 headphones feature a compact foldable design for portability. To unfold them for use:
- Gently extend the headband until it reaches a comfortable length.
- Rotate the earcups outwards until they are in the standard listening position.
Figure 3.1.1: Top view of the Behringer HC 2000 headphones in a folded position, demonstrating their compact design for storage or transport.
3.2 Connecting to an Audio Source
The HC 2000 headphones connect via a standard 3.5mm audio jack.
- Locate the audio input jack on your device (e.g., audio interface, mixer, computer, smartphone).
- Insert the 3.5mm connector of the headphone cable firmly into the device's audio output jack.
- If your device requires a 6.3mm (1/4") connection, attach the appropriate adapter (if included) to the 3.5mm plug before inserting.
Figure 3.2.1: Angled view of the Behringer HC 2000 headphones, highlighting the comfortable padded earcups and the connection point for the audio cable.
4. Operation
4.1 Wearing the Headphones
- Adjust the headband to fit comfortably over your head. The headband is adjustable to accommodate various head sizes.
- Ensure the earcups fully enclose your ears for optimal sound isolation and audio performance. The "L" and "R" markings inside the earcups indicate the left and right channels, respectively.
4.2 Adjusting Volume
Volume control is managed directly from your connected audio source. The HC 2000 headphones do not feature inline volume controls.
- Before playing audio, set the volume on your audio source to its lowest setting.
- Begin playing audio and gradually increase the volume on your audio source to a comfortable listening level.
- Avoid excessively high volume levels to prevent hearing damage.
5. Maintenance
5.1 Cleaning
- Use a soft, dry, lint-free cloth to wipe down the exterior of the headphones.
- For earcups, gently wipe with a slightly damp cloth if necessary, then immediately dry with a soft, dry cloth. Do not saturate.
- Do not use harsh chemicals, abrasive cleaners, or solvents as they may damage the finish or materials.
5.2 Storage
When not in use, fold the headphones into their compact form and store them in a protective case or bag (not included) to prevent dust accumulation and physical damage.
Figure 5.2.1: Angled view of the Behringer HC 2000 headphones in their folded configuration, ready for compact storage or transport.
6. Troubleshooting
If you encounter issues with your Behringer HC 2000 headphones, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No Sound |
|
|
| Distorted Sound |
|
|
| Sound Only in One Earcup |
|
|
7. Specifications
Technical specifications for the Behringer HC 2000 Studio Monitoring Headphones:
| Feature | Detail |
|---|---|
| Model Name | HC 2000 |
| Earpiece Shape | Over Ear |
| Connectivity Technology | Wired |
| Headphones Jack | 3.5 mm Jack |
| Audio Driver Type | Dynamic Driver |
| Audio Driver Size | 40 Millimeters |
| Frequency Response | 20 Hz - 20,000 Hz |
| Noise Control | Sound Isolation (Closed-back design) |
| Special Feature | Foldable |
| Material | Plastic |
| Item Weight | 0.42 Pounds (approx. 6.7 ounces) |
| Product Dimensions | 5.71 x 3.15 x 7.68 inches |
| Manufacturer | Music Tribe US |
| Included Components | Studio Monitoring Headphones |
| Water Resistance Level | Not Water Resistant |
| Compatible Devices | Music Production Equipment, Laptops, Desktops, Tablets, Telephones, Smart Speakers, Televisions, Car Audio Systems, Cellphones |
8. Warranty & Support
8.1 Warranty Information
Behringer products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Behringer website or the warranty card included with your product. Keep your proof of purchase for warranty claims.
8.2 Customer Support
For technical support, service, or spare parts, please contact Behringer customer support. You can find contact information and frequently asked questions on the official Behringer website:
When contacting support, please have your product model (HC 2000) and serial number (if applicable) ready.
