Introduction
This manual provides essential information for the safe and effective use of your SupplySource Global AC/DC Adapter. Please read this manual thoroughly before using the product and retain it for future reference.
This adapter is designed to provide reliable power to compatible devices, specifically the Craig CHT962 32" Dancing Water Bluetooth Jukebox Speaker System Tower.
Safety Information
Your SupplySource AC/DC Adapter is built with multiple safety features to protect against common electrical issues. Adherence to these guidelines ensures safe operation and extends the product's lifespan.
- Incorrect Voltage (IV) Protection: Safeguards against damage from improper voltage input.
- Short Circuit (SC) Protection: Prevents damage in case of a short circuit.
- Internal Overheating (IO) Protection: Monitors and prevents the adapter from overheating.
- Over Charge Protection: Protects connected devices from overcharging.
- Over Voltage Protection: Guards against excessive voltage output.
- Over Current Protection: Prevents damage from excessive current flow.
- Over Temperature Protection: Additional safeguard against high operating temperatures.
Important Notice:
- Ensure the DC output and tip size of the AC adapter match your device's requirements before connecting.
- If using the adapter for extended periods, ensure adequate ventilation and humidity control. Avoid placing it on skin products or in enclosed spaces that can trap heat.
Image: The SupplySource AC/DC Adapter highlighting its built-in safety electronics, including protections against overcharge, over voltage, short-circuit, over current, and over temperature, along with a 24-month warranty.
Setup
- Verify Compatibility: Before connecting, confirm that the adapter's DC output voltage and connector tip size are compatible with your device, specifically the Craig CHT962 speaker system. Refer to your device's manual for power requirements.
- Connect to Device: Insert the barrel connector of the adapter firmly into the power input port of your Craig CHT962 speaker system.
- Connect to Power Outlet: Plug the AC prongs of the adapter into a standard wall power outlet (100-240V AC, 60Hz).
- Power On Device: Once connected, you can power on your device as per its operating instructions.
Image: The SupplySource AC/DC Adapter, showing the main unit and its neatly coiled power cord, ready for connection.
Operating Instructions
The SupplySource AC/DC Adapter operates automatically once connected to a compatible device and a power source. It provides a stable power supply for your electronic equipment.
- Ensure the adapter is securely plugged into both the device and the wall outlet.
- The adapter is designed for continuous operation within its specified voltage range (100-240V).
- The power supply utilizes high-quality copper core wire, designed for durability and extended life.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your AC/DC adapter.
- Cleaning: Disconnect the adapter from the power outlet and the device before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Ventilation: Ensure the adapter has adequate ventilation during operation. Do not cover it or place it in confined spaces that could impede airflow.
- Cable Care: Regularly inspect the power cord for any signs of damage, such as fraying or cuts. Do not use the adapter if the cable is damaged. The cable length is approximately 4 feet.
Image: The SupplySource AC/DC Adapter, demonstrating its compact size when held in hand and explicitly showing its cable length of 4 feet.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not powering on. | Adapter not properly connected. Incorrect voltage/tip size. Power outlet issue. Device fault. |
Ensure adapter is fully plugged into device and wall outlet. Verify adapter specifications match device requirements. Test outlet with another device. Consult device's manual or support. |
| Adapter feels hot. | Lack of ventilation. Overload. |
Ensure adapter is in a well-ventilated area. Do not cover. Confirm device power requirements do not exceed adapter's capacity. |
| Flickering power to device. | Loose connection. Damaged cable. |
Check all connections are secure. Inspect cable for damage. If damaged, discontinue use and replace. |
Specifications
- Product Type: Global AC/DC Adapter
- Brand: SupplySource
- Input Voltage Range: 100-240V AC
- Frequency: 60 Hz
- Connector Type: Barrel Connector
- Cable Length: Approximately 4 feet
- Material: Metal, Plastic
- Certifications: CE, FCC
- Safety Features: Over Charge Protection, Over Voltage Protection, Short-circuit Protection, Over Current Protection, Over Temperature Protection, Incorrect Voltage Protection, Internal Overheating Protection.
- Compatible Device (Example): Craig CHT962 32" Dancing Water Bluetooth Jukebox Speaker System Tower
Warranty and Support
This SupplySource AC/DC Adapter comes with a 24-month warranty from the date of purchase, covering manufacturing defects.
For technical support, warranty claims, or further inquiries, please contact your retailer or the manufacturer, SupplySource, through their official channels. Please have your product model and purchase details ready when contacting support.
Note: This adapter is a brand new replacement unit and is not an OEM (Original Equipment Manufacturer) product.