HyperGear 15077
HyperGear RaveMini Portable Wireless LED Speaker Instruction Manual
Model: 15077
Introduction
The HyperGear RaveMini is a compact, portable wireless speaker designed to deliver powerful sound with an interactive, beat-driven LED light show. This speaker is suitable for both indoor and outdoor use, offering extended battery life and multiple playback options for a versatile audio experience.
The HyperGear RaveMini speaker and its packaging.
What's in the Box
- HyperGear RaveMini Portable Wireless LED Speaker
- Micro USB Charging Cable
- 3.5mm Stereo Auxiliary Cable
Features
- Small Size, Big Sound: Engineered with a 40mm neodymium driver for room-filling sound.
- Beat-Driven LED Lightshow: Multi-colored LEDs flash to the beat of your music.
- Wireless Connectivity: Connects with any Bluetooth device within a 33-foot range.
- Extended Battery Life: Built-in rechargeable battery provides up to 3 hours of wireless playback on a single charge.
- Hands-Free Communication: Integrated microphone and intuitive controls for managing calls and playlists.
- Multiple Playback Options: Supports Bluetooth, Aux-in, Micro SD memory card, and USB flash drive audio playback.
The RaveMini combines HD sound with a vibrant LED lightshow.
The multi-colored LED lights dance to the beat of the music.
Setup
Charging the Speaker
Before first use, fully charge your RaveMini speaker. Connect the included Micro USB charging cable to the speaker's charging port and the other end to a USB power source (e.g., wall adapter, computer USB port). The charging time is approximately 1 hour, providing up to 3 hours of playback.
Enjoy up to 3 hours of music with the RaveMini's extended battery life.
Powering On/Off
Locate the power button on the speaker. Press and hold the power button for a few seconds to turn the speaker on or off. An audible cue or LED indicator will confirm the power status.
Bluetooth Pairing
- Ensure the RaveMini speaker is powered on and in pairing mode (usually indicated by a flashing LED light).
- On your Bluetooth-enabled device (smartphone, tablet, etc.), go to the Bluetooth settings.
- Search for available devices and select "HyperGear RaveMini" (or similar name) from the list.
- Once connected, the speaker will provide an audible confirmation, and the LED light may change to a solid color.
- The speaker has a wireless range of up to 33 feet.
Operating the Speaker
Controls and Functions
The RaveMini features intuitive controls for managing your audio and calls directly from the speaker. Refer to the specific button layout on your device for functions such as:
- Play/Pause music
- Adjust Volume (Volume Up/Down)
- Skip Tracks (Next/Previous)
- Answer/End Calls
- Activate Voice Assistant (if supported)
Built-in microphone and controls allow for hands-free calls and playlist navigation.
Playback Modes
The RaveMini offers four ways to play your audio:
- Bluetooth: Connect wirelessly to your smartphone, tablet, or other Bluetooth-enabled devices.
- Aux-in: Use the included 3.5mm stereo auxiliary cable to connect to non-Bluetooth devices.
- Micro SD Card: Insert a Micro SD memory card with audio files into the designated slot.
- USB Flash Drive: Connect a USB flash drive containing audio files to the USB port.
The RaveMini supports four versatile playback options.
Maintenance
- Keep the speaker dry. Do not expose it to excessive moisture or liquids.
- Clean the speaker with a soft, dry cloth. Avoid using harsh chemicals or abrasive cleaners.
- Store the speaker in a cool, dry place when not in use.
- Avoid dropping or subjecting the speaker to strong impacts.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Speaker does not turn on. | Ensure the speaker is fully charged. Connect it to a power source using the Micro USB cable. |
| Cannot pair with Bluetooth device. |
|
| No sound or low volume. |
|
| LED lights are not working. | Check if the light show feature is enabled (if there's a dedicated button). Ensure the speaker has sufficient battery charge. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | 15077 |
| Speaker Type | Outdoor |
| Special Feature | Wireless Music + Calls, HD Stereo Sound, Beat-Driven LED Lightshow, Aux-in, Micro SD & USB compatible |
| Recommended Uses For Product | For Music Players |
| Controller Type | Battery Powered |
| Color | Black |
| Battery Life | 3 Hours |
| Charging Time | 1 Hours |
| Is Waterproof | FALSE |
| Control Method | App |
| Wireless Communication Technology | Bluetooth |
| Speaker Size | 40 Millimeters |
| Power Source | Battery Powered |
| Number of Batteries | 2 AAA batteries required. (included) |
| Audio Driver Type | Dynamic Driver |
| Bluetooth Range | 33 Feet |
| Audio Driver Size | 40 Millimeters |
| Connectivity Protocol | Bluetooth |
| Number of USB 2 Ports | 1 |
| UPC | 633755150777 |
| Manufacturer | HYPERGEAR |
| Item Weight | 10.9 ounces |
| ASIN | B07VHTZHJ4 |
| Date First Available | July 18, 2019 |
| Brand | HyperGear |
| Speaker Maximum Output Power | 5 Watts |
| Connectivity Technology | Bluetooth, Auxiliary, USB |
| Audio Output Mode | Stereo |
| Mounting Type | Tabletop Mount |
Warranty
The HyperGear RaveMini Portable Wireless LED Speaker comes with a Limited Warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official HyperGear website or contact their customer support directly. Keep your proof of purchase for warranty claims.
Support
For further assistance, product registration, or to view frequently asked questions, please visit the official HyperGear website:
Visit the HyperGear Store on Amazon
You may also contact HyperGear customer service for direct support.
Related documents15077
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.