1. Introduction and Overview
Thank you for choosing the Homelegance Blair 60-inch Dining Table with Drawer. This manual provides essential information for the safe assembly, operation, and maintenance of your new dining table. Please read it thoroughly before assembly and retain it for future reference.
The Homelegance Blair dining table is designed to provide a functional and aesthetically pleasing centerpiece for your dining area. Crafted from Asian hardwood with an oak veneer and a wire-brushed grey finish, it offers durability and style. The table includes two integrated end drawers for convenient storage.
Image 1.1: The Homelegance Blair 60-inch Dining Table in Grey, showcasing its rectangular design and wire-brushed finish.
Image 1.2: The Homelegance Blair Dining Table with both end drawers extended, illustrating the integrated storage feature.
2. Safety Information
Please observe the following safety guidelines to prevent injury or damage to the product:
- Maximum Weight Capacity: Do not exceed the maximum weight recommendation of 150 pounds on the tabletop.
- Stable Placement: Ensure the table is placed on a level, stable surface to prevent tipping.
- Assembly: Always follow assembly instructions carefully. Ensure all hardware is securely tightened before use.
- Children: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the table.
- Chemical Warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.
- Table Top
- Table Legs (4)
- Assembly Guide
- Hardware Pack (screws, washers, etc.)
- Installation Tool (Allen wrench/screwdriver)
4. Assembly Instructions
Assembly typically requires two individuals. Please follow these general steps. Refer to the included Assembly Guide for detailed, step-by-step instructions and diagrams.
Image 4.1: Icon representing the assembly process.
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
- Attach Legs: Securely attach each table leg to the designated corners of the table top using the provided hardware (bolts, washers) and the installation tool. Ensure all connections are firm.
- Tighten Hardware: Once all legs are in place, re-check and tighten all hardware connections to ensure stability. Do not overtighten.
- Position Table: With assistance, carefully turn the table upright and place it in its desired location.
Tools Required: Screw Driver (included).
Recommended Number of People for Assembly: 2
5. Operating Instructions (Usage)
Your Homelegance Blair dining table is designed for daily use in a residential setting.
- Seating Capacity: The table is designed to comfortably seat up to 6 individuals.
- Drawer Functionality: The two end drawers feature ball-bearing slides for smooth operation. To open, gently pull the handle. To close, push until fully recessed. Avoid forcing the drawers.
- Drawer Storage: The interior dimensions of each drawer are approximately 17.5 inches (length) x 13.5 inches (width) x 2 inches (height). Use these for storing small dining accessories such as placemats, napkins, or cutlery. Do not overload the drawers.
6. Care and Maintenance
Proper care will help maintain the appearance and longevity of your dining table.
Image 6.1: Icon representing general care and maintenance.
- Cleaning: For general cleaning, wipe the surface with a damp cloth, then immediately dry with a clean, dry cloth. Avoid abrasive cleaners or harsh chemicals.
- Spills: Wipe up spills immediately to prevent staining. The table is stain-resistant, but prolonged exposure to liquids can cause damage.
- Heat and Moisture: Use coasters and placemats to protect the surface from hot dishes and moisture.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration.
- Moving: When moving the table, always lift it rather than dragging it to prevent damage to the legs and frame.
7. Troubleshooting
If you encounter issues with your dining table, consider the following common solutions:
- Wobbling Table: Check that all leg bolts are securely tightened. Ensure the table is on a level surface. Adjust leg levelers if present (not specified, but a common feature).
- Drawers Sticking: Ensure the drawers are not overloaded. Check for any obstructions in the drawer slides.
- Missing Hardware: If hardware was missing upon delivery, contact customer support immediately. Do not attempt to substitute with incorrect hardware.
For persistent issues or concerns not addressed here, please contact Homelegance customer support.
8. Specifications
Image 8.1: Diagram illustrating the overall dimensions of the Homelegance Blair Dining Table.
| Feature | Detail |
|---|---|
| Brand | Homelegance |
| Model Name | Blair 60" Dining Table with Drawer |
| Model Number | 5706GY-60 |
| Color | Grey |
| Overall Dimensions (D x W x H) | 36" x 60" x 30.5" |
| Item Weight | 70.5 Pounds |
| Maximum Weight Recommendation | 150 Pounds |
| Materials | Asian Hardwood, Oak Veneer, Engineered Wood, Metal |
| Number of Drawers | 2 |
| Drawer Interior Dimensions (L x W x H) | 17.5" x 13.5" x 2" |
| Seating Capacity | 6 |
| Product Care Instructions | Wipe with Damp Cloth, Wipe with Dry Cloth |
| UPC | 782359974835 |
9. Warranty and Support
This Homelegance Blair Dining Table is covered by a 1-year limited warranty against manufacturer defects. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, missing parts, or technical support, please contact Homelegance customer service. You may also visit the official Homelegance store for more information:
