SENTRY GX200

SENTRY GX200 Gaming Headset User Manual

Model: GX200

Introduction

The SENTRY GX200 Gaming Headset is designed for an immersive audio experience across various gaming platforms. It features a 3.5mm audio jack for broad compatibility with devices such as Xbox One, PS4, Nintendo Switch, PC, and mobile phones. This manual provides instructions for setup, operation, maintenance, and troubleshooting to ensure optimal performance of your headset.

Product Features

  • Retractable Microphone: A flexible microphone is integrated into the left earpiece. It can be extended for use and retracted when not needed. The microphone includes noise cancellation technology for clear communication.
  • Comfortable Earpads: Equipped with 2-inch thick earpads for extended comfort during long gaming sessions. These high-quality earpads are designed for maximum noise isolation.
  • Broad Platform Compatibility: Connects via a 3.5mm audio jack, making it compatible with Xbox One, PS4, Nintendo Switch, PC, and mobile devices.
  • Dynamic Sound Drivers: Features 50mm neodymium drivers to deliver a wide dynamic sound range, suitable for various audio types from game effects to music.
  • Adjustable Headband: A padded headband provides a customizable and comfortable fit.
  • Integrated Controls: Includes a rotary volume control knob and a microphone mute button for easy audio management.
  • Durable Design: Single-sided cord and foldable design for portability.

Setup Instructions

  1. Connect the Headset: Insert the 3.5mm audio jack into the corresponding port on your gaming console controller, PC, or mobile device. Ensure the connection is secure.
  2. Adjust Headband: Place the headset on your head and adjust the padded headband until it fits comfortably over your ears.
  3. Position Microphone: If using the microphone, gently pull it out from the left earpiece and position it appropriately near your mouth.
  4. System Audio Settings: For consoles and PCs, you may need to adjust audio input/output settings in the system menu to ensure the headset is recognized and selected as the primary audio device and microphone. Refer to your device's user manual for specific audio configuration steps.
SENTRY GX200 Gaming Headset with 3.5mm jack connected to a device

Image: SENTRY GX200 Gaming Headset showing the 3.5mm audio jack connection. This illustrates how to connect the headset to a compatible device.

Operating Instructions

  • Volume Control: Use the rotary volume control knob located on the headset cable or earcup to adjust the audio output level. Rotate clockwise to increase volume and counter-clockwise to decrease.
  • Microphone Mute: Press the microphone mute button, typically located near the volume control, to toggle the microphone on or off. An indicator (if present) or a click will confirm the status change.
  • Microphone Usage: Ensure the retractable microphone is extended and positioned correctly for clear voice capture. Retract it when not in use to prevent damage.
SENTRY GX200 Gaming Headset showing the volume control and mute button

Image: SENTRY GX200 Gaming Headset highlighting the inline controls, including the volume knob and microphone mute button. This shows the location of key operational controls.

Maintenance

  • Cleaning: Use a soft, dry cloth to clean the headset. Do not use abrasive cleaners or solvents. For earpads, a slightly damp cloth can be used, but ensure they are completely dry before use.
  • Storage: Store the headset in a cool, dry place away from direct sunlight and extreme temperatures. The foldable design allows for compact storage.
  • Cable Care: Avoid sharp bends or excessive pulling on the cable to prevent internal damage.

Troubleshooting

ProblemPossible CauseSolution
No sound from headset.
  • Headset not properly connected.
  • Volume too low or muted.
  • Incorrect audio output settings on device.
  • Ensure 3.5mm jack is fully inserted.
  • Increase volume using the headset's control knob and check device volume.
  • Verify audio output settings on your console/PC/mobile device.
Microphone not working.
  • Microphone muted.
  • Microphone not extended or positioned correctly.
  • Incorrect audio input settings on device.
  • Press the microphone mute button to unmute.
  • Extend the microphone and position it closer to your mouth.
  • Check audio input settings on your console/PC/mobile device to ensure the headset microphone is selected.
Sound quality is poor or distorted.
  • Loose connection.
  • Volume too high, causing distortion.
  • Interference.
  • Reconnect the 3.5mm jack.
  • Lower the volume.
  • Ensure no other devices are causing electrical interference.

Specifications

Model:
GX200
Driver Diameter:
50mm Neodymium
Frequency Response:
20Hz - 20KHz
Impedance:
32 +/- 3 ohms
Sensitivity:
106dB +/- 2dB
Rated Power:
20 mW
Cord Length:
1.2 meters (4 feet)
Connectivity:
3.5mm Audio Jack (Wired)
Microphone:
Retractable, Noise Cancellation
Compatible Devices:
Xbox One, PS4, Nintendo Switch, PC, Mobile Phones
Material:
Plastic
Product Dimensions:
24.13 x 15.24 x 20.07 cm
Weight:
431 g

Warranty and Support

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official SENTRY website. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.