1. Introduction
This manual provides essential instructions for the proper installation, use, and maintenance of your Maxi-Cosi Pria Max All-in-One Convertible Car Seat. Designed to accommodate children from birth up to 10 years, this car seat transitions through rear-facing, forward-facing, and belt-positioning booster modes. Please read this manual thoroughly before using the car seat to ensure maximum safety and optimal performance.
Figure 1: Maxi-Cosi Pria Max All-in-One Convertible Car Seat.
2. Safety Guidelines
Your child's safety is paramount. Always adhere to the following guidelines and consult your vehicle's owner's manual for specific car seat installation instructions.
- Read the Entire Manual: Before any use, read and understand all instructions in this manual and the labels on the car seat.
- Proper Installation: Ensure the car seat is correctly installed in your vehicle using either the LATCH system or the vehicle's seat belt, as per the instructions for the chosen mode (rear-facing, forward-facing, or booster).
- Harness Adjustment: Always ensure the harness is snug against your child's body, with the chest clip at armpit level. The harness straps should be at or below the child's shoulders for rear-facing, and at or above the child's shoulders for forward-facing.
- Child Weight and Height Limits: Adhere strictly to the weight and height limits for each mode of use as specified in the specifications section and on the car seat labels.
- Rear-Facing for as Long as Possible: Keep children rear-facing until they reach the maximum weight or height limit for the rear-facing position.
- Never Leave Child Unattended: Do not leave your child unattended in the car seat.
- Inspect for Damage: Regularly inspect the car seat for any signs of damage, wear, or missing parts. Discontinue use if damaged.
- Avoid Aftermarket Products: Do not use any accessories or parts not approved by Maxi-Cosi, as they may compromise the car seat's safety.
3. Setup & Installation
Follow these steps to prepare and install your Maxi-Cosi Pria Max car seat. Always refer to the detailed instructions in your printed manual for complete information.
3.1 Preparing Your Car Seat
- Infant Insert Usage: The infant inserts come in three pieces (head pillow, back pillow, and positioning pillow). Always use the head pillow and back pillow together for infants. The infant positioning pillow can be removed if your child is not an infant. Consult your manual to determine if the pillow is needed based on your child's size.
- Buckle Slot Adjustment: The buckle can be used in two slots. Choose the slot closest to your child. Refer to your instruction manual for how to adjust the buckle position.
- Harness Loosening: Push down on the harness release button and pull the harness forward to loosen and provide slack. This allows for easier adjustment of the headrest and harness position.
- Headrest and Harness Adjustment: Adjust the headrest and harness system to correctly fit your child. Refer to your instruction manual for detailed guidance on rear-facing child fit.
- Recline Adjustment: Locate the recline handle and pull it forward to recline the seat fully into position 3 for rear-facing installation.
- Lower Anchor Belt Preparation: Remove the lower anchor belt from its storage location. Locate the rear-facing belt path. Thread the connector without the adjuster through the rear-facing belt path. Ensure the adjuster is fed through on the correct side and the belt is not twisted.
3.2 Car Seat Installation (Rear-Facing LATCH)
This section details installation using the LATCH (Lower Anchors and Tethers for Children) system for rear-facing mode.
Video 1: Maxi-Cosi Pria Max Car Seat Installation Help Video. This video demonstrates the preparation and rear-facing LATCH installation process for the car seat.
- Positioning: Place the car seat rear-facing in the vehicle.
- Level Line Check: Check the rear-facing level line on the car seat and ensure it is parallel to the ground. Refer to your manual for more details.
- Connect Lower Anchors: Ensure the arrows on the lower connectors are facing upwards. Fasten the left lower connector first, then the right lower connector to your vehicle's lower anchor bars.
- Tighten LATCH Belt: Push down on the car seat with one hand and pull up on the free end of the LATCH belt with the other hand to remove all slack. The car seat should not move more than one inch from side to side or front to back at the belt path.
- Recheck Level Line: Recheck your level-to-ground line to ensure it remains parallel to the ground after tightening.
3.3 Key Features for Easy Installation and Use
Figure 2: One-click LATCH connectors for quick and simple installation.
Figure 3: QuickFit Shoulder Harness automatically raises the harness and headrest height for a proper fit.
Figure 4: EZ Out harness system keeps straps and buckle from getting bunched, simplifying child placement and removal.
Figure 5: The car seat offers 3 recline positions for comfort and proper installation angle.
4. Operation
The Maxi-Cosi Pria Max is designed to adapt to your child's growth, offering three modes of use:
- Rear-Facing: For children weighing 4–40 lbs and 19"–40" in height.
- Forward-Facing: For children weighing 22–65 lbs and 29"–49" in height.
- Belt-Positioning Booster: For children weighing 40–100 lbs and 43"–52" in height.
Video 2: Maxi-Cosi Pria Max All-in-One Product Overview. This video highlights the key features and versatility of the car seat across different stages of child growth.
4.1 Securing Your Child
- Harness System: Utilize the Out-of-the-Way spring-assist harness holders to keep the harness straps open, making it easier to place your child in the seat.
- Magnetic Chest Clip: The ClipQuik one-hand magnetic chest clip simplifies buckling and unbuckling. Ensure the chest clip is positioned at armpit level.
- Harness Tightening: Pull the harness strap to ensure a snug fit. You should not be able to pinch any excess webbing at your child's shoulder.
4.2 Adapting to Growth
The QuickFit integrated headrest and harness system allows for easy, one-handed adjustment of both the headrest and harness height, ensuring a proper and comfortable fit as your child grows.
Figure 6: Child in rear-facing mode (4-40 lbs).
Figure 7: Child in forward-facing mode (22-65 lbs).
Figure 8: Child in belt-positioning booster mode (40-100 lbs).
Figure 9: The Pria Max All-in-One Convertible Car Seat transitions through three stages to grow with your child.
5. Maintenance
Regular cleaning and maintenance will help prolong the life of your car seat and ensure continued hygiene for your child.
- Fabric Care: The PureCosi™ fabrics, padding, and cushions are designed for easy removal and are machine-washable and dryer-safe. Always refer to the care label on the fabric for specific washing instructions.
- Cup Holders: The two removable cup holders are dishwasher-safe for convenient cleaning.
- Harness and Buckle: Wipe down harness straps and buckle with a damp cloth. Do not machine wash harness straps.
- Shell Cleaning: The plastic and metal parts of the car seat can be wiped clean with a mild soap and water solution.
Figure 10: Easy-off washable fabrics for convenient cleaning.
Figure 11: The car seat includes two removable cup holders for easy cleaning.
6. Troubleshooting
If you encounter issues with your Maxi-Cosi Pria Max car seat, consider the following common solutions:
- Loose Installation: If the car seat moves more than one inch at the belt path, re-read the installation instructions carefully. Ensure all slack is removed from the LATCH belt or vehicle seat belt. Apply firm pressure to the car seat while tightening.
- Harness Difficulty: If the harness is difficult to tighten or loosen, ensure it is not twisted and that the harness release button is fully depressed when loosening. Check for any obstructions.
- Child Fit Issues: Ensure the headrest and harness are adjusted to the correct height for your child's shoulders. For rear-facing, straps should be at or below shoulders. For forward-facing, straps should be at or above shoulders.
- Missing Parts/Damage: If any parts are missing or damaged, do not use the car seat. Contact Maxi-Cosi customer support immediately.
For further assistance, please refer to the complete instruction manual or contact Maxi-Cosi customer support.
7. Specifications
| Feature | Detail |
|---|---|
| Product Dimensions | 25.25 x 24 x 19.88 inches |
| Item Model Number | CC208ETK |
| Target Gender | Unisex |
| Minimum Weight Recommendation | 4 Pounds |
| Maximum Weight Recommendation | 100 Pounds |
| Maximum Height Recommendation | 52 Inches |
| Material Type | Foam |
| Care Instructions | Machine Washable |
| Number Of Items | 1 |
| Style | New Pria 3-in-1 Max |
| Batteries Required | No |
| Orientation | Forward Facing, Rear Facing |
| Rear-facing Minimum Child Weight | 4 Pounds |
| Forward-facing Maximum Child Weight | 65 Pounds |
| Harness Type | 5-Point |
| Item Weight | 23 pounds |
| Installation Type | Latch |
| Color | Nomad Black |
8. Warranty & Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Maxi-Cosi website. If you have any questions, require assistance with installation, or need to report a product issue, please contact Maxi-Cosi customer support.
You can find more information and support resources on the Maxi-Cosi Brand Store.
