HOMCOM B07VGD4V1J

Download PDF
Contents

HOMCOM Mirror Jewelry Cabinet Armoire with LED Lights - Instruction Manual

Model: B07VGD4V1J | Brand: HOMCOM

1. Introduction

Thank you for choosing the HOMCOM Mirror Jewelry Cabinet Armoire with LED Lights. This versatile piece of furniture combines a full-length mirror with extensive jewelry storage and adjustable features, designed to enhance your daily routine. Please read this manual thoroughly before assembly and use to ensure safe and optimal performance of your new jewelry cabinet.

HOMCOM Mirror Jewelry Cabinet Armoire in a bedroom setting
Figure 1: The HOMCOM Mirror Jewelry Cabinet Armoire in a bedroom setting, showcasing its full-length mirror and elegant design.

2. Safety Information

  • Keep all packaging materials away from children to prevent choking hazards.
  • Ensure all parts are securely fastened during assembly. Loose parts can cause instability.
  • Place the cabinet on a flat, stable surface to prevent tipping.
  • Do not overload the storage compartments, as this may affect stability and functionality.
  • Keep the cabinet away from direct heat sources or excessive moisture.
  • Use only the specified battery type (3 x AA batteries, not included) for the LED lights. Ensure correct polarity.
  • Adult assembly is required.

3. Package Contents

Before beginning assembly, ensure all parts are present and undamaged. Refer to the included assembly diagram for a complete list of components.

  • Mirror Jewelry Cabinet Body
  • Base Stands (2 pieces)
  • Connecting Rods/Dowel Pins
  • Hardware Pack (screws, nuts, etc.)
  • Keys for Lock
  • Instruction Manual

4. Assembly Instructions

Follow these steps to assemble your HOMCOM Mirror Jewelry Cabinet. It is recommended to have a second person assist with certain steps for ease and safety.

  1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, clean surface to prevent scratches. Identify each part using the provided parts list in your manual.
  2. Assemble the Base: Attach the two base stands to the bottom of the main cabinet body using the provided screws. Ensure they are firmly secured to provide a stable foundation.
  3. Attach Connecting Rods: Insert the wooden dowel pins into the designated holes on the side of the cabinet and the stand. These will allow for angle adjustment.
  4. Install LED Batteries: Locate the battery compartment on the back of the mirror. Insert 3 x AA batteries (not included) ensuring correct polarity. Close the compartment securely.
  5. Final Check: Once assembled, gently test the stability of the cabinet and the mirror's rotation. Ensure all screws are tightened and the cabinet stands upright without wobbling.
Video 1: An official HOMCOM video demonstrating the assembly process and key features of a similar jewelry cabinet model.
Diagram showing three adjustable tilt positions for the mirror jewelry cabinet
Figure 2: Illustration of the three adjustable tilt positions for the full-length mirror, allowing users to find their preferred viewing angle.

5. Operating Instructions

5.1 Using the Full-Length Mirror

The cabinet features a clear, full-length mirror on its front, ideal for checking outfits and daily grooming.

5.2 Adjusting the Mirror Angle

The mirror can be adjusted to three different tilt positions. To adjust, gently lift the mirror from its current dowel pin and re-insert it into a different set of holes on the side stands to achieve your desired angle.

5.3 Utilizing Internal Storage

Open the mirror door to access the ample internal storage. The interior is designed to organize various jewelry items and beauty essentials:

  • Earring Notches: 32 notches are available for hanging earrings.
  • Ring Slots: 70 slots are provided to securely hold finger rings.
  • Necklace/Bracelet Hooks: 12 hooks are available for hanging necklaces and bracelets, preventing tangles.
  • Storage Shelves: 3 internal shelves offer space for cosmetics, perfumes, and other accessories.
Interior view of the jewelry cabinet showing organized storage for rings, earrings, necklaces, and shelves for cosmetics
Figure 3: The interior of the cabinet, illustrating dedicated compartments for rings, earrings, necklaces, and shelves for beauty products.

5.4 Operating LED Lights

The cabinet is equipped with 16 LED lights around the mirror for enhanced visibility. To operate, ensure 3 x AA batteries are correctly installed in the battery compartment. The lights are typically activated by a switch located near the battery compartment or inside the cabinet.

Close-up view of the LED bulbs and battery compartment on the jewelry cabinet
Figure 4: A detailed view of the 16 LED bulbs surrounding the mirror and the battery compartment for power.

6. Maintenance and Care

  • Cleaning: Wipe the exterior and mirror surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish or mirror.
  • Interior Care: The velvet lining can be gently vacuumed or wiped with a lint roller to remove dust and debris.
  • Battery Replacement: Replace LED batteries when lights dim. Always use new batteries of the specified type (3 x AA).
  • Hardware Check: Periodically check all screws and connections to ensure they remain tight.

7. Troubleshooting

  • LED Lights Not Working: Check if batteries are inserted correctly with proper polarity. Ensure batteries are new and not depleted. Verify the light switch is in the 'ON' position.
  • Cabinet Wobbles: Ensure the cabinet is placed on a level surface. Tighten all assembly screws, especially those connecting the base stands to the main body.
  • Mirror Adjustment Difficulty: Ensure the dowel pins are fully inserted into the holes. Do not force the adjustment; gently lift and reposition.

8. Specifications

FeatureDetail
BrandHOMCOM
Model Number (ASIN)B07VGD4V1J
ColorWarm White
MaterialEngineered Wood (MDF)
Overall Dimensions (W x H x D)14.25" x 53.5" x 11.75" (36 x 136 x 30 cm)
Cabinet Dimensions (L x W x T)39.5" x 12.5" x 2.5" (100 x 31.5 x 6.7 cm)
Item Weight16.5 Pounds
Special FeaturesAdjustable Mirror Angle, 16 LED Lights
Power Source for LED3 x AA Batteries (not included)
Storage Capacity32 Earring Notches, 70 Ring Slots, 12 Necklace/Bracelet Hooks, 3 Storage Shelves
Mounting TypeFreestanding
Diagram showing the dimensions of the HOMCOM Mirror Jewelry Cabinet Armoire
Figure 5: Detailed dimensions of the jewelry cabinet for reference.

9. Warranty and Support

This HOMCOM Mirror Jewelry Cabinet Armoire is covered by a 90 Day Warranty Against Manufacturer Defects. For warranty claims, product support, or any inquiries, please contact Aosom Canada, the manufacturer, directly.

Manufacturer Contact Information:
Markham, Ontario, CA
Tel: 1-416-792-6088

© 2026 HOMCOM. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.