Introduction
Thank you for purchasing the PDP Gaming Afterglow Wireless Nintendo Switch Pro Controller. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your new controller. Please read this manual thoroughly before use to ensure optimal performance and longevity of your device.
Product Overview
The PDP Gaming Afterglow Wireless Controller is designed for the Nintendo Switch, offering enhanced gaming with its wireless capabilities, customizable Prismatic LED lighting, motion controls, and programmable back buttons. It features a transparent casing that showcases the internal components and vibrant lighting effects.
Figure 1: Front view of the Afterglow Wireless Controller, showcasing its transparent design and illuminated internal components.
Key Features:
- Wireless Connectivity: Enjoy gaming with a 30-foot wireless range.
- Rechargeable Battery: Built-in battery provides up to 40 hours of gameplay.
- Prismatic LED Lighting: Customizable full-color range with four lighting modes.
- Motion Controls: Integrated motion sensors for compatible games.
- Dual, Programmable Back Buttons: Map controller functions for personalized gameplay.
- Officially Licensed: Designed exclusively for Nintendo Switch.
Setup
1. Charging the Controller
Before initial use, fully charge the controller. Connect the included USB-C cable to the controller's charging port and the other end to a USB power source (e.g., Nintendo Switch dock, USB wall adapter). The LED indicators will show charging status and turn off when fully charged.
2. Pairing with Nintendo Switch
- From the Nintendo Switch HOME Menu, select Controllers, then Change Grip/Order.
- On the controller, press and hold the Sync Button (located near the USB-C port) for at least 3 seconds until the LED indicators begin to flash.
- Once paired, the player LED(s) on the bottom of the controller will remain lit.
Figure 2: Side view of the controller, highlighting the USB-C charging port and the sync button for pairing.
Operating Instructions
1. Prismatic LED Lighting Customization
The controller features customizable LED lighting. To change the lighting mode or color:
- Press the Function Button (usually a small button near the right joystick) to cycle through different lighting modes (e.g., solid color, breathing, rainbow).
- Hold the Function Button and use the Left Joystick to adjust the color hue.
- Hold the Function Button and use the Right Joystick to adjust brightness.
Figure 3: Multiple Afterglow controllers demonstrating the customizable prismatic LED lighting in various colors.
2. Programming Back Buttons
The controller includes two programmable back buttons (P1 and P2) for quick access to frequently used functions.
- Press and hold the Program Button (located on the back of the controller) until the LED indicator flashes.
- Press the button you wish to map (e.g., A, B, X, Y, L, R, ZL, ZR, D-pad directions).
- Press the back button (P1 or P2) you want to assign the function to. The LED indicator will stop flashing, confirming the mapping.
- To clear a programmed button, repeat steps 1-3 without pressing a button in step 2.
Figure 4: Rear view of the controller, highlighting the two programmable paddle buttons for custom assignments.
3. Motion Controls
This controller supports motion controls for games that utilize this feature. Ensure the game's settings are configured to use motion controls with a Pro Controller.
Maintenance
Cleaning
To clean your controller, use a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the surface or internal components. Avoid exposing the controller to excessive moisture.
Battery Care
To maximize battery life, avoid fully discharging the controller frequently. Store the controller in a cool, dry place when not in use for extended periods. Recharge the battery periodically if stored for a long time to prevent deep discharge.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Controller does not connect/pair. | Out of range, low battery, or pairing issue. |
|
| LED lights are not working or flickering. | Incorrect lighting mode, low battery, or software glitch. |
|
| Controller experiences "stick drift". | Calibration issue or minor wear. |
|
Specifications
- Model Number: 500-137
- Connectivity: Wireless
- Battery Type: Lithium Polymer (included)
- Battery Life: Up to 40 hours (approximate)
- Wireless Range: Up to 30 feet (approximate)
- Dimensions: 3.94 x 1.65 x 4.53 inches
- Weight: 10.8 ounces
- Compatibility: Nintendo Switch only (not compatible with PC)
- Release Date: November 16, 2019
Warranty and Support
For warranty information and detailed support, please refer to the official PDP Gaming website or the user guide PDF provided with your product. A digital version of the user guide can be accessed via the following link:
For further assistance, contact PDP Gaming customer support through their official channels.
