Introduction
Thank you for choosing the myGEKOgear Orbit 110 Dash Camera. This manual provides detailed instructions to help you set up, operate, and maintain your device, ensuring optimal performance and longevity. The Orbit 110 is designed to record high-quality video footage of your journeys, offering peace of mind and crucial evidence in unforeseen events.
What's Included
Please verify that all items listed below are present in your package:
- myGEKOgear Orbit 110 Dash Camera
- 12 Volt Power Cable
- Suction Cup Mount
- 8GB Micro SD Card
- Micro SD Card Reader
- User Manual (this document)
- Warranty Card
Image: The myGEKOgear Orbit 110 dash camera is shown with its included accessories, including the 12V power cable, suction cup mount, 8GB Micro SD card, and card reader.
Setup Instructions
1. Inserting the Micro SD Card
- Locate the Micro SD card slot on the side of the dash camera.
- Insert the provided 8GB Micro SD card (or a compatible card up to 32GB) into the slot with the gold contacts facing the back of the camera.
- Push the card gently until it clicks into place. To remove, push it again until it springs out.
Image: A close-up view illustrating the correct orientation for inserting a Micro SD card into the dash camera's designated slot.
2. Mounting the Dash Camera
- Clean the desired area on your windshield thoroughly. Ensure it is free from dust and grease.
- Attach the suction cup mount to the dash camera.
- Press the suction cup firmly against the windshield and flip the lever to secure it.
- Adjust the camera angle to ensure a clear view of the road ahead, avoiding obstruction of your driving view.
Image: The myGEKOgear Orbit 110 dash camera is shown mounted on a car's windshield, capturing a wide-angle view of a multi-lane road with palm trees.
3. Connecting Power
- Connect the 12 Volt Power Cable to the dash camera's power input port.
- Plug the other end of the power cable into your vehicle's 12V power outlet (cigarette lighter socket).
- The camera will typically power on automatically when the vehicle's ignition is turned on.
Operating Instructions
Automatic Recording
Once powered on, the Orbit 110 will automatically begin recording in a continuous loop. Older files will be overwritten by new recordings when the Micro SD card is full, unless they are protected by the G-Sensor.
Video Quality and Field of View
- Full HD 1080p: The camera records in 1080p Full HD resolution, providing clear video footage for day and night conditions.
- 120° FOV: The 120-degree field of view captures a wide area of the road, ensuring comprehensive coverage.
Image: The myGEKOgear Orbit 110 dash camera is displayed from both its front lens perspective and its rear screen view, showing the device's compact design and user interface.
G-Sensor for Emergency Recording
The built-in G-Sensor detects sudden impacts, rapid acceleration, or harsh braking. When such an event occurs, the G-Sensor automatically locks the current video file, preventing it from being overwritten during loop recording. This ensures critical footage is preserved.
Image: An illustration depicting the G-Sensor feature of the dash camera, showing how it detects an impact during a car accident to automatically save emergency video files.
Menu Navigation
Use the buttons on the side of the camera to navigate through the menu options on the 1.5-inch display. Refer to the on-screen prompts for specific settings such as date/time, video resolution, and G-Sensor sensitivity.
Maintenance
Cleaning the Camera
- Use a soft, dry cloth to clean the camera body.
- For the lens, use a specialized lens cleaning cloth to avoid scratches. Do not use abrasive cleaners.
- Ensure the camera is powered off and disconnected from power before cleaning.
Micro SD Card Management
- It is recommended to format the Micro SD card periodically (e.g., once a month) to maintain optimal recording performance and prevent data corruption. This can usually be done through the camera's menu settings.
- Back up any important video files to a computer before formatting the card.
- Replace the Micro SD card if you notice any recording errors or performance degradation.
Troubleshooting
| Problem | Possible Solution |
|---|---|
| Camera does not power on. |
|
| Camera stops recording or shows an error. |
|
| Video footage is blurry or unclear. |
|
| G-Sensor is too sensitive or not sensitive enough. | Adjust the G-Sensor sensitivity setting in the camera's menu. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | Orbit 110 |
| Item Model Number | GO1108G |
| Video Capture Resolution | 1080p Full HD |
| Field of View (FOV) | 120° |
| Screen Display Size | 1.5 inches |
| Special Feature | G-Sensor for Auto Incident Recording |
| Connectivity Technology | USB |
| Mounting Type | Suction Mount |
| Included Micro SD Card | 8GB (Supports up to 32GB) |
| Power Source | 12 Volt Power Cable (Vehicle) |
| Battery | 1 Lithium Ion battery (included) |
| Dimensions (LxWxH) | 7 x 14 x 11 inches (Product Dimensions) |
| Item Weight | 4.8 ounces |
| Color | Black |
Warranty Information
The myGEKOgear Orbit 110 Dash Camera comes with a standard manufacturer's warranty. Please refer to the included Warranty Card in your package for specific terms, conditions, and duration of coverage. Retain your proof of purchase for any warranty claims.
Customer Support
For further assistance, technical support, or inquiries regarding your myGEKOgear Orbit 110 Dash Camera, please visit the official myGEKOgear website or contact their customer service department. You can find contact information on the warranty card or by visiting the myGEKOgear Store on Amazon.
