Introduction
This manual provides essential instructions for the safe and efficient installation, operation, and maintenance of your Noma C9 LED Quick Clip Christmas Lights. Please read this manual thoroughly before use and retain it for future reference.
Safety Information
- Always unplug the lights from the power source before installation, removal, or maintenance.
- Do not connect more than 22 strands end-to-end to avoid overloading.
- Ensure all connections are secure and protected from moisture.
- Do not mount or place near gas or electric heaters, fireplaces, candles, or other similar sources of heat.
- Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails.
- Do not let lamps rest on the supply cord or on any wire.
- Inspect the product carefully before each use. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracked lampholders or enclosures, loose connections, or exposed copper wire.
- This product is intended for seasonal installation and removal.
Package Contents
- 1 x Noma C9 LED Quick Clip Christmas Lights Strand (100 Warm White Bulbs, 66.8 ft)
- Integrated Quick Clips
Setup and Installation
The Noma C9 LED Quick Clip Christmas Lights are designed for easy installation on various surfaces, including rooflines, gutters, and tree branches, using the integrated quick clips.
Step 1: Planning Your Display
Before installation, plan the layout of your lights. Each strand is 66.8 feet long and can be connected end-to-end with up to 22 strands for a total of 2,200 lights. Ensure your chosen location has access to a suitable power outlet.
Step 2: Attaching the Lights
The lights feature built-in spring-loaded clips for secure attachment. These clips rotate 180 degrees, allowing for flexible light positioning.
Image: Noma C9 LED Quick Clip Christmas Lights securely attached to a snow-covered roofline using the integrated clips.
- Identify the desired attachment point (e.g., gutter edge, roof shingle, tree branch).
- Open the quick clip by pressing the spring-loaded mechanism.
- Position the clip over the edge of the surface and release to secure.
- Adjust the light bulb's direction by rotating the clip up to 180 degrees.
Image: A hand demonstrating the attachment of a Noma Quick Clip light to a roof edge, highlighting the ease of installation.
Image: A diagram illustrating the 180-degree rotational capability of the Noma Quick Clip, allowing for adjustable light positioning.
Image: Noma Quick Clip lights attached to a tree branch, demonstrating versatility in placement.
Image: Noma Quick Clip lights attached to a gutter, showcasing another common installation method.
Step 3: Connecting Multiple Strands
Each strand features end-to-end connectivity. To extend your display, simply plug the male end of one strand into the female end of another. Ensure the total connected wattage does not exceed 216 Watts (maximum 22 strands).
Video: Installation Overview
Video: This video demonstrates the installation process of Noma Quick Clip LED Christmas Lights, including attaching them to various surfaces and connecting multiple strands.
Operating Instructions
Once installed, plug the light strand into a standard 120V AC power outlet. The lights will illuminate. There is no separate on/off switch on the strand itself; operation is controlled by plugging/unplugging or using an external timer (not included).
- Light Source: LED
- Light Color: Warm White
- Bulb Shape Size: C9
- Number of Light Sources: 100
- Voltage: 120 Volts
- Wattage: 9.6 watts per strand
- Maximum Compatible Wattage: 216 Watts (for connected strands)
- Bulb Features: Not Dimmable
Maintenance
These LED lights are designed for durability and low maintenance. However, proper care will extend their lifespan.
- Cleaning: Disconnect from power. Wipe bulbs and wires with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Storage: After seasonal use, carefully unplug the lights. Store them in a cool, dry place, preferably in their original packaging or a protective container, to prevent tangling and damage.
- Bulb Replacement: The LED bulbs are integrated and not designed for individual replacement. If a bulb fails, the entire strand or section may be affected.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lights do not illuminate. |
|
|
| Only a section of lights is out. |
|
|
| Clips are not holding securely. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Brand | Noma |
| Model Number | 1513697 |
| Light Type | LED |
| Bulb Shape Size | C9 |
| Number of Bulbs | 100 |
| Light Color | Warm White |
| Color Temperature | 3300 Kelvin |
| Strand Length | 66.8 Feet |
| Bulb Spacing | 8 inches |
| Power Source | Corded Electric |
| Voltage | 120 Volts |
| Wattage | 9.6 watts |
| Max Connectable Strands | Up to 22 strands (2,200 lights) |
| Maximum Compatible Wattage (Connected) | 216 Watts |
| Indoor/Outdoor Usage | Indoor, Outdoor |
| Special Feature | Energy Efficient, Built-in Quick Clips (180-degree rotation) |
| Material | Acrylic (bulbs), GPPS (shade) |
| Item Weight | 6.71 pounds |
Warranty Information
This Noma C9 Quick Clip string light product is covered by a 3-year limited warranty. For warranty claims or further details, please contact Noma customer support.
Customer Support
For assistance with your Noma C9 LED Quick Clip Christmas Lights, please refer to the contact information provided with your product packaging or visit the official Noma website.
Online Resources: Noma Store on Amazon
