1. Introduction
Thank you for choosing the TOOWELL Motion Sensor Ceiling Light. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new light fixture. Please read this manual thoroughly before use to ensure safe and efficient operation. Keep this manual for future reference.
2. Product Overview
Key Features
- Upgrade Daylight/Night Mode: Slide the switch to turn photocell sensor on/off. Under Daylight mode, motion motivated light on all day long. Under Daylight/Night mode, the light only activates at night and turns off automatically after 20 seconds.
- Motion Sensored: Built-in PIR infrared motion detector with 120-degree detection angle. Instantly turns on when it detects motion from up to 20 feet away.
- Brightness: Super bright 400 Lumens with 80 pcs bright & long life-span SMD2835 LEDs. Provides wide coverage (300 sqft) with a frosted lamp cover to soften light.
- Energy Efficient Battery Powered: Requires 4 D-cell batteries (not included). Designed for efficiency, providing more than 6 months of light on one set of batteries.
- Wireless & Easy to Install: No electricity required, quick installation in less than 5 minutes. Ideal for lighting up closets, pantries, stairways, sheds, porches, and storage rooms.
What's in the Box
- 1 x Battery powered ceiling light
- Mounting hardware (screws, anchors, fixing plug)
- Batteries are NOT included.
Product Images
3. Setup and Installation
The TOOWELL Motion Sensor Ceiling Light is designed for quick and easy installation without the need for electrical wiring. Follow these steps:
- Prepare the Light: Gently twist the back plate of the light counter-clockwise to detach it from the main light unit.
- Install Batteries: Insert 4 D-cell batteries (not included) into the battery compartment, ensuring correct polarity.
- Reattach Back Plate: Align the back plate with the light unit and twist clockwise to secure it.
- Mount the Base Plate: Choose a desired location on the ceiling or wall. Use the included screws and anchors to securely mount the base plate.
- Attach the Light Unit: Align the light unit with the mounted base plate and twist clockwise until it clicks into place.
- Remove Protective Film: Kindly note that a blue protective film is stuck on the silver part of the light to keep it clean. You can tear this film off before use for optimal appearance.
4. Operating Instructions
Your TOOWELL Motion Sensor Ceiling Light offers two operating modes:
- Daylight Mode: Slide the switch on the light to the 'Daylight' (sun icon) position. In this mode, the motion sensor will activate the light whenever motion is detected, regardless of ambient light conditions (day or night). The light will turn off automatically after 20 seconds of no motion.
- Daylight/Night Mode: Slide the switch on the light to the 'Daylight/Night' (moon icon) position. In this mode, the motion sensor will only activate the light when motion is detected in low-light or dark conditions (at night). The light will turn off automatically after 20 seconds of no motion.
The built-in PIR infrared motion detector has a 120-degree detection angle and can detect motion from up to 20 feet away.
5. Maintenance
- Battery Replacement: When the light begins to dim or fails to activate, it's time to replace the batteries. Follow the steps in the 'Setup and Installation' section to safely replace the 4 D-cell batteries.
- Cleaning: To clean the light fixture, gently wipe the surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- LED Lifespan: The integrated LED lights are designed for a long lifespan and do not require replacement.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | 1. Batteries are dead or incorrectly installed. 2. Light mode is set incorrectly for ambient light conditions. 3. No motion detected within range. | 1. Replace batteries and ensure correct polarity. 2. Check the Daylight/Night mode switch. If it's too bright for Night mode, switch to Daylight mode. 3. Ensure motion is within 20 feet and 120-degree detection angle. |
| Light stays on constantly. | 1. Continuous motion detected. 2. Light mode is set to 'Daylight' in a constantly bright area. | 1. Ensure no continuous motion is within the sensor's range. 2. If in a bright area, switch to 'Daylight/Night' mode so it only activates in darkness. |
| Light is dim. | Batteries are low. | Replace all 4 D-cell batteries. |
| Motion sensor is not responsive. | 1. Sensor is obstructed or dirty. 2. Incorrect installation height. | 1. Clean the sensor lens with a soft cloth. Ensure no objects are blocking the sensor. 2. Ensure installation height is within recommended range (3-5m / 9.8-16.4ft). |
7. Specifications
| Specification | Value |
|---|---|
| Brand | TOOWELL |
| Model | Update Daylight Motion Sensor Light |
| Light Source Type | LED (SMD2835) |
| Brightness | 400 Lumens |
| Color Temperature | 5000 Kelvin |
| Power Source | 4 D-cell Batteries (Not Included) |
| Motion Sensor Angle | 120 degrees |
| Motion Detection Range | Up to 20 feet |
| Auto-Off Timer | 20 seconds (after no motion) |
| Product Dimensions | 7.5"D x 1.8"H (7.5"L x 7.5"W x 1.8"H) |
| Item Weight | 14.4 ounces |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Installation Type | Flush Mount |
| Indoor/Outdoor Usage | Indoor use only |
8. Warranty and Support
Warranty Information
Specific warranty details for the TOOWELL Motion Sensor Ceiling Light are not provided in this manual. For information regarding product warranty, please refer to the product packaging or contact the manufacturer directly.
Customer Support
If you encounter any issues or have questions not covered in this manual, please contact TOOWELL customer support. You can typically find contact information on the product packaging, the seller's page on the retail platform, or the official TOOWELL website.
When contacting support, please have your product model number (Update Daylight Motion Sensor Light) and purchase details (e.g., order number, date of purchase) ready to assist with faster service.
