Beyution BE-XRT510-ORI

Download PDFFree PDF. The Save button below keeps a bookmark and private notes in your account.

Beyution XRT510 Remote Control Instruction Manual

Model: XRT510

1. Introduction

This manual provides comprehensive instructions for the Beyution XRT510 Replacement Infrared Remote Control. This remote is designed to be compatible with various Vizio Smart HDTV models, offering a straightforward solution for controlling your television.

The XRT510 remote operates using infrared technology, meaning it requires a direct line of sight to your television's IR receiver to function correctly. No complex programming is typically required; simply insert the batteries, and the remote should be ready for use.

Front view of the Beyution XRT510 remote control, showing all buttons and their labels.

Figure 1: Front view of the Beyution XRT510 Remote Control.

2. Setup

2.1 Battery Installation

The XRT510 remote control requires two (2) AAA batteries for operation. Follow these steps to install the batteries:

  1. Locate the battery compartment cover on the back of the remote control.
  2. Press down on the tab and slide the cover downwards to open the compartment.
  3. Insert two new AAA alkaline batteries, ensuring that the positive (+) and negative (-) terminals align correctly with the markings inside the compartment. Incorrect insertion can prevent the remote from functioning.
  4. Slide the battery compartment cover back into place until it clicks securely.
Back view of the Beyution XRT510 remote control, showing the battery compartment.

Figure 2: Back view of the remote control with battery compartment.

Important Note: For optimal performance and to avoid issues, always use brand new alkaline batteries. Rechargeable batteries may not provide sufficient power for consistent operation.

3. Operating Instructions

3.1 Basic Operation

Once batteries are installed, the XRT510 remote control is designed to work immediately with compatible Vizio Smart HDTV models without additional programming. Ensure there is a clear line of sight between the remote's infrared emitter (located at the top front of the remote) and your television's IR receiver.

3.2 Compatible Vizio Smart HDTV Models

This replacement remote control is compatible with the following Vizio Smart HDTV models:

  • M321iA2, M321i-A2
  • M401iA3, M401i-A3
  • M471iA2, M471i-A2
  • M501DA2, M501D-A2, M501DA2R, M501D-A2R
  • M551DA2, M551D-A2, M551DA2R, M551D-A2R
  • M601DA3, M601D-A3, M601DA3R, M601D-A3R
  • M651DA2, M651D-A2, M651DA2R, M651D-A2R
  • M701DA3, M701D-A3, M701DA3R, M701D-A3R
  • M801DA3, M801D-A3, M801DA3R, M801D-A3R
  • M801iA3, M801i-A3

If your specific Vizio TV model is not listed above, please contact customer support for compatibility verification before use.

4. Maintenance

4.1 Cleaning the Remote

To clean the remote control, use a soft, dry cloth. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals, solvents, or abrasive materials, as these can damage the remote's surface or internal components.

4.2 Battery Replacement

Replace batteries when the remote's responsiveness decreases or it stops functioning. Always replace both batteries simultaneously with new alkaline batteries. Refer to Section 2.1 for detailed battery installation instructions.

5. Troubleshooting

  • Remote Not Responding:
    • Ensure new alkaline batteries are correctly installed. Replace old or rechargeable batteries with fresh alkaline ones.
    • Check for any obstructions between the remote control and the television's infrared receiver. Ensure a clear line of sight.
    • Verify that the remote's infrared emitter (at the top front) is not blocked or dirty.
  • Specific Buttons Not Working:
    • This remote is a replacement infrared remote. Some advanced functions or smart TV features might require the original remote or specific TV settings.
    • Ensure the remote is pointed directly at the TV.
  • TV Model Not Listed:
    • If your Vizio TV model number is not explicitly listed in Section 3.2, compatibility is not guaranteed. Please contact Beyution customer support for assistance before purchasing or using the remote.

6. Specifications

FeatureDetail
Model NumberBE-XRT510-ORI
Product Dimensions7 x 2 x 0.65 inches
Item Weight2 ounces
Batteries Required2 AAA batteries (not included)
Connectivity TechnologyInfrared (IR)
Compatible DevicesVizio Smart HDTVs (specific models listed in Section 3.2)
Max Number of Supported Devices1 (Television)
Special FeatureErgonomic design

7. Warranty and Support

7.1 Product Support

For any questions regarding compatibility, troubleshooting, or general inquiries about your Beyution XRT510 remote control, please contact Beyution customer support. If your TV model is not listed in this manual, it is recommended to verify compatibility with support before use.

Contact information for support is typically available on the product packaging or the manufacturer's official website.

7.2 Return Policy

This product is subject to a 30-day return policy for refund or replacement. Please refer to your purchase receipt or the retailer's return policy for specific terms and conditions.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.