Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your EZoneTronics Android 10.1 Car Stereo. Please read this manual thoroughly before using the product to ensure proper functionality and safety. Keep this manual for future reference.
Safety Information
- Always operate the device responsibly and in accordance with local traffic laws. Distracted driving can lead to accidents.
- Do not attempt to install or service the unit yourself if you are not qualified. Improper installation can cause damage to the vehicle's electrical system or the unit itself.
- Ensure all wiring connections are secure and properly insulated to prevent short circuits.
- Avoid exposing the unit to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.
- Use only approved accessories and components with this device.
Setup and Installation
This EZoneTronics Android 10.1 Car Stereo is designed for Honda CR-V models from 2007 to 2011. Before installation, verify compatibility with your vehicle's dashboard and wiring harness.
Package Contents:
- EZoneTronics Android Car Stereo Unit
- Power Harness
- GPS Antenna
- USB Cables
- RCA Cables
- User Manual (this document)
Installation Steps:
- Disconnect Battery: Before starting, disconnect the negative terminal of your vehicle's battery to prevent electrical shorts.
- Remove Factory Radio: Carefully remove the existing factory radio and dashboard trim. Refer to your vehicle's service manual for specific instructions.
- Connect Wiring Harness: Connect the provided power harness to your vehicle's wiring. Ensure all connections (power, ground, speaker wires, antenna) are correctly matched.
- Connect GPS Antenna: Mount the GPS antenna in a location with a clear view of the sky, typically on the dashboard or under the windshield.
- Connect USB and RCA Cables: Route the USB and RCA cables to desired locations (e.g., glove compartment, center console) for easy access.
- Test Connections: Before fully reassembling the dashboard, reconnect the battery and power on the unit to test basic functions (power, audio, touch screen).
- Secure Unit: Mount the new car stereo securely into the dashboard opening.
- Reassemble Dashboard: Reinstall all dashboard trim pieces.
Image: EZoneTronics Android Car Stereo installed in a Honda CR-V dashboard, showing the 9-inch screen integrated into the vehicle's interior.
Operating Instructions
Basic Operations:
- Power On/Off: Press the power button on the unit or use the vehicle's ignition.
- Volume Control: Adjust volume using the physical knobs/buttons or on-screen controls.
- Touchscreen Interface: Navigate through menus and applications by tapping, swiping, and pinching on the capacitive touchscreen.
CarPlay and Android Auto:
The unit supports integrated CarPlay and Android Auto functionalities. Connect your smartphone via USB to access compatible apps, navigation, calls, and messages directly on the car stereo display.
Image: The car stereo screen showing the CarPlay and Android Auto interfaces, with a smartphone displaying the respective connection options.
GPS Navigation:
Utilize the built-in GPS receiver for navigation. The unit is compatible with various online and offline mapping applications such as Waze, Navfree, and Google Maps. Ensure the GPS antenna is properly installed for optimal signal reception.
Image: The car stereo screen displaying a GPS navigation map with route information and various map application icons.
Split Screen Function:
The split-screen feature allows you to run two applications simultaneously. For example, you can use navigation on one side of the screen while playing music or browsing on the other. To activate, long-press the recent apps button or drag an app to one side of the screen.
Image: The car stereo screen demonstrating the split-screen function, with a navigation map on one side and a video game or media player on the other.
Steering Wheel Control (SWC):
The unit supports your vehicle's original steering wheel control buttons. This allows you to manage audio playback, volume, and other functions without taking your hands off the wheel, enhancing safety and convenience. Configuration may be required in the system settings.
Image: The car stereo screen displaying a music player interface, with an inset image highlighting the steering wheel control buttons.
FM & RDS Radio:
Access the built-in AM/FM radio tuner. The unit features 18 preset stations and RDS (Radio Data System) functionality, which displays station information, song titles, and traffic updates where available.
Image: The car stereo screen showing the FM radio interface, displaying frequency, preset buttons, and RDS information.
Bluetooth Connectivity:
The unit features Bluetooth 4.0 for hands-free calling, contact synchronization, call record access, and wireless audio streaming (A2DP). Pair your smartphone with the unit via Bluetooth settings.
Image: The car stereo screen displaying the Bluetooth interface, showing options for hands-free calls, contact sync, and Bluetooth music playback, with a smartphone connected.
USB Playback:
Connect USB devices to the rear USB inputs for media playback (music, videos) or to charge compatible devices. The unit supports various audio and video formats.
Rear Camera Input:
The unit supports an AHD (Analog High Definition) rear camera input. When connected, the display automatically switches to the camera view when the vehicle is in reverse, providing parking assistance with high-definition reversing images and parking lines.
Image: The car stereo screen showing a high-definition rear camera view with dynamic parking guidelines, and an inset image of an AHD camera.
Picture in Picture (PIP):
The Picture in Picture feature allows a video to play in a small, floating window while you use other applications on the main screen. This enhances the user experience by allowing multitasking.
Image: The car stereo screen demonstrating Picture in Picture mode, with a small video window floating over the main Android home screen.
Maintenance
Screen Cleaning:
To clean the touchscreen, gently wipe it with a soft, lint-free cloth. For stubborn smudges, slightly dampen the cloth with water or a screen-safe cleaner. Avoid harsh chemicals or abrasive materials.
Software Updates:
Periodically check for software updates to ensure optimal performance and access to new features. Updates can typically be performed via Wi-Fi or USB. Refer to the system settings for update options.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not power on | Incorrect wiring, blown fuse, vehicle battery issue | Check power connections, inspect vehicle fuses, ensure battery is charged. |
| No sound | Volume too low, speaker wires disconnected, incorrect audio settings | Increase volume, check speaker wiring, verify audio output settings. |
| GPS signal lost or inaccurate | GPS antenna improperly installed or obstructed | Ensure GPS antenna has a clear view of the sky, check antenna connection. |
| Bluetooth connection issues | Device not in pairing mode, interference, incorrect settings | Ensure both devices are in pairing mode, restart Bluetooth on both devices, clear previous pairings. |
| Unit freezes or is unresponsive | Software glitch, too many apps running | Perform a soft reset (refer to device settings), close unnecessary applications. If issue persists, contact support. |
Specifications
- Brand: EZoneTronics
- Model Name: 2 DIN Android 10 Car Radio
- Vehicle Service Type: Car
- Screen Size: 9 Inches
- Special Features: DAB, RDS
- Connectivity Technology: Bluetooth, USB, Wi-Fi
- Map Type: Satellite
- Included Components: Bluetooth, Wi-Fi
- Audio Output Mode: Stereo
- Resolution: 1024 x 600
- Operating System: Android 10.1
- RAM: 2GB
- ROM: 32GB
Warranty Information
EZoneTronics offers a 1-year warranty for this product from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications. Please retain your proof of purchase for warranty claims.
Customer Support
For technical assistance, troubleshooting, or warranty inquiries, please contact our customer support team:
- Email: sales2@rhythmhk.com
Our support team is available to assist you in multiple languages, including English, French, Italian, German, Spanish, Portuguese, Chinese, and Japanese.
