Pit Boss 67344 Insulated Blanket for 1100 Series Grills User Manual

1. Product Overview

The Pit Boss Insulated Blanket is designed to enhance the performance of your 1100 Series Grill, particularly in colder climates. This thermal blanket provides a crucial buffer against external elements such as snow and rain, ensuring consistent internal temperatures during operation. By minimizing heat loss, it helps to maintain optimal cooking conditions and reduces pellet consumption, making your grill more efficient year-round.

Image 1: Pit Boss Insulated Blanket installed on a grill, featuring a cutout for the temperature gauge.

2. Compatibility

This insulated blanket is specifically designed to fit Pit Boss 1100 Series Grills. Compatible models include:

• Pit Boss Pro Series 1100
• Pit Boss Austin XL

Ensure your grill model matches the listed compatibility for proper fit and optimal performance.

3. Setup and Installation

Installing the Pit Boss Insulated Blanket is a straightforward process. Follow these steps to properly secure the blanket to your grill:

1. Unfold the Blanket: Carefully unfold the insulated blanket and lay it flat to identify the top, bottom, front, and back sections.
2. Position on Grill Lid: Place the blanket over the lid of your Pit Boss 1100 Series Grill, aligning the cutout with the grill's built-in temperature gauge.
3. Secure with Magnets: The blanket features internal magnets along the front and back edges. Ensure these magnets firmly attach to the metal surfaces of your grill lid and body to hold the blanket in place.
4. Attach Handle Flap: Locate the velcro flap designed to go under the grill handle. Secure this flap to ensure the front of the blanket is snug around the handle.
5. Fasten Rear Strap (if applicable): Some models may include a strap to loop around the rear legs of the grill for additional security. If present, fasten this strap.
6. Check Fit: Verify that the blanket is evenly distributed and securely attached, covering all necessary surfaces of the grill lid and barrel to prevent heat escape.

Image 2: Side view of the insulated blanket, illustrating its fit around the grill's structure.

4. Operating Instructions

The insulated blanket is primarily intended for use in cold weather conditions to maintain consistent grill temperatures and optimize pellet efficiency. It is recommended for use when ambient temperatures are low, typically below 35-40°F (2-4°C).

• Temperature Stability: The blanket helps to stabilize the internal temperature of your grill, reducing fluctuations caused by cold air and wind. This is crucial for long smoking sessions where consistent heat is vital for optimal results.
• Pellet Efficiency: By minimizing heat loss, the blanket reduces the amount of fuel (pellets) required to maintain your desired cooking temperature. This leads to less pellet waste and more economical operation during colder months.
• Year-Round Grilling: With the insulated blanket, you can confidently use your Pit Boss grill for smoking and grilling even in harsh winter conditions, extending your outdoor cooking season.

Note: While beneficial in cold weather, using the blanket in warmer conditions may lead to overheating or difficulty in maintaining lower temperatures. Always monitor your grill's temperature closely.

5. Maintenance

Proper care and maintenance will extend the life of your insulated blanket:

• Cleaning: Always clean and dry your grill cover to prevent mold and mildew growth. Use a damp cloth with mild soap to wipe down any soiled areas. Avoid harsh chemicals or abrasive cleaners.
• Drying: Ensure the blanket is completely dry before storing to prevent moisture-related damage.
• Storage: Store the blanket in a cool, dry place away from direct sunlight when not in use.
• Safety Precaution: Use with caution as the material may be flammable. Keep away from open flames or extreme heat sources other than the grill's intended use.

6. Troubleshooting

If you encounter issues while using your insulated blanket, consider the following:

• Inconsistent Temperature: Ensure the blanket is properly installed and securely fastened around the grill. Gaps or loose areas can allow heat to escape. Check that the temperature gauge cutout is correctly aligned.
• Excessive Pellet Consumption (in cold weather): While the blanket is designed to reduce pellet waste, extreme cold or strong winds can still impact efficiency. Verify proper installation and consider additional wind breaks if necessary.
• Overheating (in mild weather): If the ambient temperature is not sufficiently low, the blanket might cause the grill to exceed desired temperatures. Remove the blanket if outdoor conditions are mild or warm.

7. Specifications

8. Warranty

Specific warranty details for the Pit Boss 67344 Insulated Blanket are not provided in the product information. Please refer to the official Pit Boss website or contact customer support for the most up-to-date warranty information.

9. Customer Support

For further assistance, questions, or to report any issues with your Pit Boss Insulated Blanket, please visit the official Pit Boss website or contact their customer service department. You can often find contact information, FAQs, and additional resources on the manufacturer's website.

Manufacturer: Dansons inc.

Pit Boss Store: Visit the PIT BOSS Store on Amazon