Introduction
Thank you for choosing the Retekess TH101 Wireless Emergency Call Button System. This system is designed to provide timely assistance for individuals who may need help, such as the elderly, patients, disabled persons, and pregnant women. Please read this manual carefully before use to ensure proper operation and to maximize the benefits of your device.
The system features a portable, waterproof call button and a plug-in receiver with adjustable volume and multiple ringtone options, making it suitable for various home and care environments.
What's in the Box
Upon unpacking your Retekess TH101 system, please ensure all components are present:
- 1 x Call Button (Transmitter)
- 1 x Siren Receiver
- 1 x User Manual
- 1 x Lanyard for Call Button

Image: Contents of the Retekess TH101 package, showing the call button, siren receiver, and user manual.
Setup Instructions
1. Powering the Receiver
- Plug the siren receiver into a standard wall outlet.
- The receiver will power on and be ready for use.
2. Call Button Battery Installation/Check
The call button comes with a pre-installed CR2016 lithium metal battery. If the button is not responding or the range is significantly reduced, the battery may need replacement.
- To replace the battery, carefully open the call button casing.
- Insert a new CR2016 lithium metal battery, ensuring correct polarity.
- Close the casing securely.
3. Pairing the Call Button with the Receiver
The system is typically pre-paired. If pairing is lost or you are adding additional buttons/receivers, follow these steps:
- Plug in the receiver.
- Press and hold the volume button on the receiver for approximately 5 seconds until you hear a 'ding' sound and the indicator light flashes. This indicates pairing mode.
- Within 10 seconds, press the call button (transmitter). The receiver will sound a ringtone, confirming successful pairing.
- Repeat for any additional call buttons.

Image: Visual guide demonstrating how to pair the call button with the receiver.
4. Placement of the Call Button
The call button is designed for portability and can be:
- Worn around the neck using the included lanyard.
- Carried in a pocket.
- Mounted on a wall or near a bed using adhesive (not included, but shown in some images).

Image: An elderly individual wearing the emergency call button around their neck for easy access.
Operating Instructions
1. Initiating an Emergency Call
To request assistance, simply press the large red 'SOS' button on the call transmitter. The receiver will immediately sound the selected ringtone and flash its indicator light.

Image: A hand pressing the red SOS button on the call transmitter.
2. Adjusting Ringtone and Volume
The receiver offers 52 selectable ringtones and 4 adjustable volume levels (0 dB to 110 dB).
- Changing Ringtone: Press the 'Ringtone' button on the side of the receiver to cycle through the available melodies.
- Adjusting Volume: Press the 'Volume' button on the side of the receiver to select one of the four volume levels.

Image: The siren receiver with clearly labeled buttons for adjusting ringtone and volume settings.
Maintenance
1. Cleaning
Wipe the devices with a soft, dry cloth. Do not use abrasive cleaners or solvents.
2. Battery Replacement
As mentioned in the setup section, replace the CR2016 lithium metal battery in the call button when the signal range decreases or the button stops functioning. Ensure proper disposal of old batteries.
3. Waterproof Feature
The call button (transmitter) has an IP55 waterproof rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for daily use and protects against splashes of food or water. However, it is not designed for submersion.

Image: The emergency call button shown with water splashes, highlighting its IP55 anti-splash design.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Receiver does not sound when button is pressed. | Receiver is unplugged or not powered. Button battery is low or dead. Button and receiver are not paired. | Ensure receiver is plugged into a working outlet. Replace the CR2016 battery in the call button. Follow the pairing instructions in the 'Setup' section. |
| Short or suddenly reduced operating distance. | Button battery is low. Obstructions (thick walls, metal objects) between button and receiver. Interference from other wireless devices. | Replace the CR2016 battery in the call button. Relocate the receiver or button to minimize obstructions. Move the system away from other wireless devices. |
| Receiver indicator light flashes but no sound. | Volume is set to 0 dB. | Press the 'Volume' button on the receiver to increase the volume level. |
Product Specifications
- Brand: Retekess
- Model: TH101
- Model Number (Reference): EUF9465A
- Power Source: Battery Powered (Call Button), AC Plug-in (Receiver)
- Call Button Battery: 1 x CR2016 Lithium Metal (included)
- Voltage: 3 Volts
- Sound Level: Up to 110 Decibels
- Control Method: Touch (Button)
- Max Range (Open Air): 300 Meters (approx. 984 feet)
- Indoor Working Distance: 20-50 Meters (approx. 65-164 feet), signal can penetrate 1-2 walls.
- Sensor Technology: Manual Sensor
- Receiver Dimensions (L x W x H): 88 x 104 x 70 mm (approx. 3.46 x 4.09 x 2.76 inches)
- Call Button Dimensions (L x W x H): 59 x 34 x 12 mm (approx. 2.32 x 1.34 x 0.47 inches)
- Weight: 140 grams (total package weight)
- Waterproof Rating (Call Button): IP55 (dust protected, protected against low-pressure water jets)
- Ringtones: 52 selectable melodies
- Volume Levels: 4 adjustable levels (0 dB to 110 dB)
- Components Included: 1 Call Button, 1 Siren Receiver, 1 User Manual

Image: Detailed dimensions of both the siren receiver and the call button.
Warranty Information
Retekess offers a 2-year warranty for the TH101 Wireless Emergency Call Button System. Additionally, a 30-day no-reason return policy is provided from the date of purchase.
Beyond the warranty period, we continue to offer maintenance services. Please note that any corresponding costs for maintenance outside the warranty period will be borne by the buyer.
Customer Support
For any questions, technical assistance, or warranty claims, please contact us directly through Amazon. We aim to respond to all inquiries within 12 hours.
You can visit the official Retekess store on Amazon for more information and products: Retekess Amazon Store