Introduction
Thank you for choosing the NICREW ClassicLED Gen 2 Aquarium Light. This advanced LED lighting system is designed to provide optimal illumination for your freshwater or saltwater aquarium, promoting healthy plant growth and vibrant fish colors. Featuring 2-channel control for white and blue LEDs, dimmable settings, and an integrated timer with sunrise/sunset simulation, this light offers comprehensive control over your aquarium's lighting environment. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your product.
Safety Instructions
- Always unplug the light from the power outlet before performing any maintenance, cleaning, or when placing hands in the aquarium water.
- This product is designed for indoor use only. Do not expose to water splashes or immerse in water. It is not water resistant.
- Ensure the power cord is not damaged. Do not operate the light if the cord or plug is damaged.
- Keep the power adapter and controller away from water. A drip loop should be formed with the power cord to prevent water from traveling along the cord and reaching the electrical outlet.
- Do not attempt to disassemble or modify the light fixture. Refer all servicing to qualified personnel.
- Ensure the light is securely mounted on the aquarium to prevent accidental falls.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Package Contents
Please check the package for the following items:
- NICREW ClassicLED Gen 2 Aquarium Light Fixture
- Adjustable Mounting Brackets (2x)
- Inline Controller with Power Cord
- Power Adapter
Setup Instructions
- Attach Mounting Brackets: Insert the adjustable mounting brackets into the slots on each end of the light fixture. Ensure they are securely seated.
Image: The NICREW ClassicLED Gen 2 light fixture with its adjustable mounting brackets installed on both ends, ready for placement on an aquarium.
- Position the Light: Place the light fixture on top of your aquarium. Adjust the extendable brackets to fit the width of your tank (for 30-36 inch aquariums). Ensure the light is centered and stable.
Image: A technical diagram illustrating the dimensions of the NICREW ClassicLED Gen 2 light, including its length and width, and how the adjustable brackets extend to fit various tank sizes.
- Connect Power: Connect the inline controller to the light fixture, then connect the power adapter to the controller. Plug the power adapter into a suitable electrical outlet. Create a drip loop with the power cord to prevent water from reaching the outlet.
Image: The NICREW ClassicLED Gen 2 Aquarium Light, showcasing the light bar and its attached inline controller with buttons for operation.
Operating Instructions
The NICREW ClassicLED Gen 2 features an inline controller for easy operation. Refer to the diagram below for button functions.
Image: A close-up diagram of the inline controller for the NICREW ClassicLED Gen 2, labeling the 'W' (white LEDs), 'B' (blue LEDs), timer, and 'M' (mode/power) buttons.
Button Functions:
- W Button (White LEDs): Press to adjust the brightness of the white LEDs. Multiple presses will cycle through different brightness levels.
- B Button (Blue LEDs): Press to adjust the brightness of the blue LEDs. Multiple presses will cycle through different brightness levels.
- Timer Button: Press to cycle through the built-in timer options (8 hours, 10 hours, 12 hours). The light will automatically turn on and off at the set intervals.
- M Button (Mode/Power): Press to switch between daylight mode (white and blue LEDs) and moonlight mode (blue LEDs only). Press and hold for 3 seconds to turn the light ON/OFF.
Color Temperature Adjustment:
The independent control of white and blue LEDs allows for precise color temperature adjustment. You can lower blue lights for a warmer appearance or increase blue lights for a cooler, more intense look. This feature is useful for highlighting specific fish colors or plant growth.
Image: The NICREW ClassicLED Gen 2 light illuminating an aquarium, demonstrating the ability to adjust color temperature by independently dimming white and blue LEDs, ranging from cool blue to bright white.
Sunrise/Sunset Simulation:
The integrated timer includes a 15-minute ramp-up and dim-down feature. This gradual lighting increase and decrease simulates natural sunrise and sunset conditions, preventing sudden changes that can startle fish and providing a more natural environment.
Image: An aquarium illuminated by the NICREW ClassicLED Gen 2 light, demonstrating the 15-minute gradient sunrise/sunset feature with a soft blue glow, designed to avoid startling fish.
Maintenance
- Cleaning: Regularly wipe the light fixture with a soft, damp cloth to remove dust, water spots, and algae buildup. Ensure the light is unplugged before cleaning. Do not use abrasive cleaners or solvents.
- Inspection: Periodically inspect the power cord, controller, and light fixture for any signs of damage or wear. Replace any damaged components immediately.
- Heat Dissipation: Ensure the aluminum alloy housing remains clear of obstructions to allow for proper heat rejection, which is crucial for the light's performance and lifespan.
Image: A close-up view of the NICREW ClassicLED Gen 2's aluminum alloy housing, highlighting its finned design for efficient heat dissipation, indicated by arrows showing heat rising away from the fixture.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. |
|
|
| One color channel (e.g., blue LEDs) is not working. |
|
|
| Timer function is not working as expected. |
|
|
Specifications
| Brand: | NICREW |
| Model Number: | N14584 |
| Size: | 30 - 36 inches (Light length without bracket: 28.3 inches) |
| Wattage: | 25 Watts |
| Light Source Type: | LED (White and Blue) |
| Control Method: | Inline Controller |
| Special Feature: | Dimmable, 2-Channel Control, Built-in Timer (8/10/12H), 15-minute Sunrise/Sunset |
| Material: | Aluminum Alloy, Acrylic, Glass |
| Product Dimensions (LxWxH): | 32.28 x 4.84 x 2.17 inches (approx.) |
| Water Resistance Level: | Not Water Resistant |
Warranty and Support
The NICREW ClassicLED Gen 2 Aquarium Light comes with a Hassle-Free 12-Month Warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.
For technical assistance, troubleshooting, or warranty claims, please contact NICREW Customer Service. Our team is available to provide 24-hour friendly customer service.
Please visit the official NICREW website or refer to your purchase documentation for contact information.
