Introduction
This manual provides detailed instructions for the safe and efficient use of your LEDVANCE Panan Disc Single LED Desk Lamp. Please read this manual thoroughly before operating the lamp and retain it for future reference.
The LEDVANCE Panan Disc Single is a mobile table lamp designed for indoor use, featuring a continuous dimmer and a flexible lamp neck. It is equipped with an integrated lithium battery, allowing for wireless operation and easy portability.
Product Overview
The LEDVANCE Panan Disc Single LED Desk Lamp offers versatile lighting solutions with its portable design and adjustable features. Key components include the lamp head with integrated LEDs, a flexible silicone rubber neck, and a stable base with a touch sensor.
Figure 1: Overview of the LEDVANCE Panan Disc Single LED Desk Lamp.
Key Features:
- Integrated lithium battery for portability and up to 4 hours of light without a power outlet.
- Continuous switching and dimming via a touch sensor located on the lamp base.
- Flexible lamp neck allows for free and precise alignment of the light source.
- Warm white light color (3000 Kelvin) for a comfortable ambiance.
- Rechargeable via standard USB cable (1m length included).
Setup
Your LEDVANCE Panan Disc Single LED Desk Lamp comes pre-assembled and ready for use. Follow these steps for initial setup:
- Unpacking: Carefully remove the lamp from its packaging. Ensure all components, including the lamp unit and USB charging cable, are present.
- Initial Charge: Before first use, it is recommended to fully charge the lamp. Connect the included USB cable to the lamp's charging port (usually located on the base) and to a compatible USB power source (e.g., computer USB port, USB wall adapter). The charging indicator (if present) will show the charging status.
- Placement: Place the lamp on a stable, flat surface such as a desk, table, or nightstand.
Figure 2: The lamp base with the integrated touch sensor.
Figure 3: The lamp positioned on a desk, ready for use.
Operating Instructions
Power On/Off and Dimming:
The lamp is controlled by a touch sensor located on its base. This sensor allows for both switching the lamp on/off and adjusting its brightness.
- To Turn On/Off: Lightly tap the touch sensor on the lamp base. The lamp will turn on or off with each tap.
- To Dim: Press and hold the touch sensor. The brightness will continuously increase or decrease. Release your finger when the desired brightness level is reached.
Adjusting the Lamp Neck:
The lamp features a flexible silicone rubber neck, allowing you to direct the light precisely where needed. Gently bend the neck to adjust the angle and height of the light source.
Charging the Battery:
When the battery is low, the lamp's light output may decrease, or it may turn off. To recharge:
- Connect the provided USB cable to the charging port on the lamp base.
- Plug the other end of the USB cable into a standard USB power source (e.g., computer, USB wall adapter, power bank).
- A full charge typically provides up to 4 hours of continuous light, depending on the brightness setting.
Maintenance
Proper maintenance ensures the longevity and optimal performance of your LEDVANCE desk lamp.
- Cleaning: Disconnect the lamp from any power source before cleaning. Use a soft, dry, or slightly damp cloth to wipe the lamp's surfaces. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Storage: If storing the lamp for an extended period, ensure it is fully charged and store it in a cool, dry place away from direct sunlight and extreme temperatures.
- Battery Care: To prolong battery life, avoid completely draining the battery frequently. Recharge the lamp regularly, even if not in constant use.
Troubleshooting
If you encounter issues with your LEDVANCE Panan Disc Single LED Desk Lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on. | Battery is depleted. | Connect the lamp to a USB power source and charge it fully. |
| Lamp light is dim or flickers. | Low battery. | Recharge the lamp. |
| Touch sensor is unresponsive. | Lamp is not powered or sensor is dirty. | Ensure battery is charged. Clean the touch sensor area with a dry cloth. |
| Lamp does not charge. | Faulty USB cable or power source. | Try a different USB cable or a different USB power adapter/port. |
Specifications
Detailed technical specifications for the LEDVANCE Panan Disc Single LED Desk Lamp:
| Attribute | Value |
|---|---|
| Brand | LEDVANCE |
| Model Number | 4058075321267 |
| Product Dimensions (L x W x H) | 35 x 17 x 37 cm |
| Item Weight | 660 grams |
| Battery Type | 1 Lithium-ion (included) |
| IP Rating | IP20 |
| Style | Single Disc |
| Color | White |
| Material | Acrylonitrile Butadiene Styrene |
| Number of Bulbs | 1 |
| Voltage | 5 Volts |
| Special Features | Dimmable |
| Light Source Type | LED |
| Luminous Flux | 220 lm |
| Wattage | 5 Watts |
| Color Temperature | 3000 Kelvin |
| Color Rendering Index (CRI) | 80 |
| Average Life | 30000 Hours |
| Switch Style | Touch |
| Power Source | Battery Powered |
Figure 4: Product dimensions (Height: 370mm, Base Diameter: 170mm, Lamp Head Length: 350mm).
Figure 5: Energy efficiency rating (A to G scale).
Warranty and Support
LEDVANCE products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or spare parts availability, please refer to the official LEDVANCE website or contact their customer service directly.
You can also visit the official LEDVANCE store on Amazon for more product information and support: LEDVANCE Amazon Store.
Please note that information on spare parts availability and guaranteed software updates is not available at this time.
