Introduction
This manual provides essential instructions for the safe and effective use of your OMNIHIL 8-foot AC Power Cord. This power cord is designed for compatibility with the KEF X300A Wireless Speaker, providing reliable power delivery. Please read this manual thoroughly before use.
Safety Information
- Ensure the power cord is fully inserted into both the device and the power outlet.
- Do not use the power cord if it is damaged, frayed, or has exposed wires.
- Avoid placing heavy objects on the cord or running it under carpets, which can cause damage.
- Keep the power cord away from water and excessive heat.
- This product is UL Listed, indicating it meets specific safety standards.
Setup
Follow these steps to connect your OMNIHIL AC Power Cord to your KEF X300A Wireless Speaker:
- Identify Ports: Locate the power input port on your KEF X300A Wireless Speaker. This is typically a three-prong (IEC C13) receptacle.
- Connect to Speaker: Take the female end (IEC C13 connector) of the OMNIHIL AC Power Cord and firmly insert it into the power input port of your KEF X300A speaker.
- Connect to Power Outlet: Take the male end (Type B, NEMA 5-15P plug) of the power cord and insert it into a standard wall power outlet.
- Verify Connection: Ensure both ends of the power cord are securely connected.
Image: The OMNIHIL AC power cord with its male (Type B) and female (IEC C13) connectors. The male plug has two flat prongs and one round grounding prong. The female connector has three rectangular slots.
Operating Instructions
The OMNIHIL AC Power Cord is a passive component designed to supply electrical power. Once properly connected as described in the Setup section:
- The KEF X300A Wireless Speaker should receive power from the wall outlet.
- Refer to your KEF X300A Wireless Speaker's own instruction manual for specific power-on procedures and operational details.
Image: The OMNIHIL AC power cord, coiled neatly, with the male Type B plug visible at one end.
Maintenance
Proper care and maintenance will extend the life of your power cord:
- Storage: When not in use, coil the cord loosely. Avoid tight coiling or sharp bends that can damage internal wires.
- Cleaning: Disconnect the cord from all power sources before cleaning. Wipe the cord with a dry, soft cloth. Do not use liquid cleaners or abrasive materials.
- Inspection: Periodically inspect the cord for any signs of wear, cuts, or damage to the insulation or connectors.
Image: A detailed view of both the male Type B plug and the female IEC C13 connector of the OMNIHIL AC power cord, highlighting their construction.
Troubleshooting
If your KEF X300A Wireless Speaker is not receiving power after connecting the OMNIHIL AC Power Cord, consider the following:
- No Power:
- Ensure both ends of the power cord are fully and securely plugged in.
- Test the wall outlet with another device to confirm it is functional.
- Inspect the power cord for any visible damage. If damaged, discontinue use and replace.
- Intermittent Power:
- Check for loose connections at both the speaker and the wall outlet.
- Ensure the cord is not being bent or stressed at any point.
Image: A close-up view of the female IEC C13 connector of the OMNIHIL AC power cord, showing the three rectangular pin receptacles.
Specifications
| Brand | OMNIHIL |
| Model Number | OMNI0712036602 |
| Length | 8 Feet (approximately 2.4 meters) |
| Color | White |
| Connector Type | Male-to-Female |
| Plug Format (Male End) | Type B (NEMA 5-15P) |
| Receptacle Format (Female End) | IEC C13 |
| Certifications | UL Listed, ROHS |
| Compatibility | KEF X300A Wireless Speaker and other compatible devices |
Warranty Information
This OMNIHIL AC Power Cord is covered by a 5 YEAR FREE REPLACEMENT WARRANTY. This warranty covers defects in materials and workmanship under normal use.
To claim warranty service, please retain your proof of purchase and contact OMNIHIL customer support through the retailer where the product was purchased or via the official OMNIHIL website.
Support
For further assistance, technical support, or inquiries regarding your OMNIHIL AC Power Cord, please visit the official OMNIHIL website or contact their customer service department. Contact information can typically be found on the product packaging or the retailer's product page.
You can also refer to the OMNIHIL Store on Amazon for additional product information and support resources.