Amazon Basics Ceramic Space Heater User Manual

1. Important Safety Instructions

Please read and understand all safety instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Placement: Always place the heater on a firm, level surface. Do not place on soft surfaces like beds or rugs where openings may be blocked.
• Power Source: Ensure the heater is plugged directly into a 120V AC electrical outlet. Do not use with extension cords or power strips.
• Clearance: Maintain a minimum distance of 3 feet (0.9 meters) from walls, furniture, curtains, and other combustible materials.
• Moisture: This heater is designed for indoor use only in dry environments. Do not use in humid environments such as bathrooms, laundry rooms, or areas near sinks, showers, or swimming pools.
• Supervision: Do not leave the heater unattended while in use. Always unplug the heater when not in use.
• Overheat Protection: The heater is equipped with an automatic overheat protection system that will shut off the unit if it becomes too hot. If this occurs, unplug the heater, allow it to cool for 30 minutes, and then plug it back in.
• Tip-Over Protection: A built-in safety switch automatically turns off the heater if it is accidentally tipped over. Ensure the heater is on a stable surface for proper operation.
• Children and Pets: Keep the heater out of reach of children and pets. Do not allow them to play with or near the heater.
• Ventilation: Do not block air inlets or outlets. Ensure proper airflow around the heater.

2. Product Overview

The Amazon Basics Ceramic Space Heater provides efficient and portable heating for small to medium-sized indoor spaces. It features adjustable heat settings and safety mechanisms for reliable operation.

Key Features:

• Customizable Heating Options: High (1500W), Low (900W), or Fan Only.
• Adjustable Thermostat: Maintains desired room temperature.
• Compact & Portable Design: Lightweight with an integrated carry handle.
• Safety Features: Built-in Tip-Over Protection and Overheat Protection.
• Power Indicator Light: Illuminates when the unit is powered on.

A silver and black Amazon Basics ceramic space heater, showing the front grille and top controls.

An image highlighting the adjustable thermostat, TUV certified auto-shutoff tip-over protection, and power indicator light of the heater.

3. Setup

Unpacking:

1. Carefully remove the heater from its packaging.
2. Remove all packaging materials, including any protective films or ties.
3. Inspect the heater for any signs of damage. If damaged, do not use and contact customer support.

Placement:

1. Place the heater on a stable, level, and heat-resistant surface.
2. Ensure the heater is at least 3 feet (0.9 meters) away from any walls, furniture, curtains, or other flammable objects.
3. Do not place the heater in areas where it could be easily tipped over or where children or pets might access it.
4. Ensure the power cord is not pinched or placed under the heater.

The heater with its dimensions (7.5 inches deep, 6.3 inches wide, 9.5 inches high) and an integrated top handle for portability.

An illustration demonstrating the heater's tip-over protection switch located on its base, designed to automatically shut off the unit if it is knocked over.

4. Operating Instructions

Controls:

The heater features two control dials located on the top of the unit:

• Left Dial (Thermostat): Used to set the desired room temperature. Turn clockwise to increase the temperature, counter-clockwise to decrease.
• Right Dial (Mode Selector): Used to select the operating mode.
• Fan Only: Circulates air without heat.
• Low Heat (900W): Provides a lower heat output.
• High Heat (1500W): Provides maximum heat output.

A detailed view of the heater's two control dials: one for thermostat adjustment and the other for selecting fan, low heat, or high heat modes.

Initial Operation:

1. Plug the heater into a grounded 120V AC electrical outlet. The power indicator light will illuminate.
2. Turn the left (thermostat) dial to the maximum setting (clockwise) to ensure the heater will activate.
3. Turn the right (mode selector) dial to your desired heat setting (Low Heat or High Heat).
4. The heater will begin to emit warm air.

Adjusting Settings:

1. Once the room reaches a comfortable temperature, slowly turn the left (thermostat) dial counter-clockwise until the heater turns off. This sets the thermostat to maintain that temperature.
2. The heater will cycle on and off to maintain the set temperature.
3. To use the fan without heat, turn the right (mode selector) dial to the "Fan Only" setting.
4. To turn off the heater, turn the right (mode selector) dial to the "OFF" position and unplug the unit from the wall outlet.

The ceramic heater positioned on a desk next to a computer mouse and headphones, illustrating its use in a home office environment.

The heater placed on the floor next to a bed, with a person sitting nearby, demonstrating its use for personal heating in a living space.

5. Maintenance

Regular maintenance helps ensure the longevity and safe operation of your heater.

Cleaning:

1. Always unplug the heater and allow it to cool completely before cleaning.
2. Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents.
3. Use a vacuum cleaner with a brush attachment to gently remove dust from the air intake and exhaust grilles.
4. Do not immerse the heater in water or allow water to drip into the interior.

Storage:

1. Before storing, ensure the heater is completely cool and clean.
2. Store the heater in a cool, dry place, away from direct sunlight and extreme temperatures.
3. It is recommended to store the heater in its original packaging to protect it from dust and damage.

6. Troubleshooting

If you experience issues with your heater, refer to the following table for common problems and solutions.

7. Specifications

8. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your product or visit the official Amazon Basics website. Keep your purchase receipt for warranty claims.