1. Important Safety Information
Please read and understand all instructions before assembling, inflating, and using this airbed. Failure to follow these instructions may result in serious injury or product damage. Keep this manual for future reference.
- Do not use this airbed near open flames, heaters, or other hot objects.
- Keep sharp objects away from the airbed.
- Ensure the area around the airbed is clear of obstructions to prevent falls.
- This product is not a toy. Do not allow children to jump or play on the airbed unsupervised.
- Do not overinflate the airbed.
- Maximum weight limit: 600 pounds (272 kg).
- Always unplug the pump when not in use or before cleaning.
2. Product Overview
The Intex Dura-Beam Essential Rest Airbed features innovative Fibre-Tech construction, providing enhanced comfort, stability, and support. Its traditional bed height and velvety mattress top offer a comfortable sleeping experience. The integrated electric pump allows for quick inflation and deflation.
Key Features:
- Fibre-Tech Interior Construction: Thousands of high-strength polyester fibers for comfort and support.
- Velvety Sleeping Surface: Soft-to-the-touch top for added comfort.
- 18-inch Raised Height: For convenience, making it easier to get on and off.
- Built-in Electric Pump: QuickFill Plus Internal Pump for rapid inflation and deflation (approx. 3.5-4 minutes).
- Unique Edge and Bottom Ring Construction: Provides superior stability and helps grip fitted sheets.
- Dual Chamber Construction: Enhances vertical stability.
What's in the Box:
- Intex Dura-Beam Essential Rest Queen Airbed
- Carry Bag
- Repair Patch
3. Setup and Initial Inflation
Follow these steps for proper setup and initial inflation of your airbed.
- Unpack the Airbed: Remove the airbed from its carry bag and unroll it on a clean, flat surface, free from sharp objects.
- Locate the Built-in Pump: The pump is integrated into the side of the airbed. Open the cover to access the power cord.
- Plug In: Plug the power cord into a standard 110-120V AC electrical outlet.
- Inflate: Turn the pump switch to the 'Inflate' position. The airbed will begin to inflate. Allow approximately 3.5 to 4 minutes for full inflation.
- Adjust Firmness: Once inflated, turn the pump switch to 'Off' and close the pump cover. You can add or release air to achieve your desired firmness.
Image: Built-in electric pump for easy inflation and deflation.
Initial Stretching and Re-inflation:
When new, the material of the airbed will naturally stretch. This may cause the airbed to feel softer or appear to lose air during the first few uses. This is normal and not a leak.
Video: Official Intex instructional video explaining initial airbed stretching and how to re-inflate for optimal firmness.
Simply re-inflate the airbed as needed until it fully settles, which typically takes 2-3 nights of use. This process ensures the material reaches its full elasticity and provides consistent firmness.
4. Operating Instructions
General Use:
- Place the airbed on a smooth, clean surface.
- For best comfort, ensure the airbed is fully inflated to your preferred firmness.
- The 18-inch height makes it comparable to a traditional bed, allowing for easy entry and exit.
- The outer perimeter frame provides additional stability, reducing roll-off.
Image: Top and bottom edge support maximizes sleeping surface and provides a solid foundation.
Deflation:
- Ensure the airbed is unplugged from the power outlet.
- Open the pump cover and plug the power cord back in.
- Turn the pump switch to the 'Deflate' position. The pump will actively remove air from the airbed.
- Once fully deflated, turn the pump switch to 'Off', unplug the cord, and close the pump cover.
- Fold the airbed neatly for storage in the provided carry bag.
5. Maintenance
Cleaning:
- The airbed surface can be cleaned with a damp cloth and mild soap.
- Do not use harsh chemicals or abrasive cleaners, as these can damage the material.
- Ensure the airbed is completely dry before storing to prevent mold or mildew.
- The manufacturer recommends hand washing only for product care.
Storage:
- After deflating and cleaning, fold the airbed carefully.
- Store the airbed in its original carry bag in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid placing heavy objects on top of the stored airbed.
Repair Patch:
A repair patch is included for minor punctures. Clean and dry the damaged area thoroughly before applying the patch according to the instructions provided with the patch.
6. Troubleshooting
Airbed Appears to Lose Air:
- Material Stretching: As mentioned in the setup section, new airbeds will stretch. This is normal and not a leak. Re-inflate the airbed as needed for the first 2-3 nights.
- Temperature Changes: Cold air causes air to contract, making the airbed feel softer. Warm air causes air to expand. Adjust inflation as room temperature changes.
- Valve/Pump Seal: Ensure the pump cover is securely closed after inflation. Check for any debris around the pump seal.
- Puncture: Inspect the airbed for any small holes or punctures. Use the included repair patch for minor damage.
7. Specifications
| Specification | Detail |
|---|---|
| Model Name | Essential Rest |
| Model Number | 64125EP |
| Size | Queen |
| Product Dimensions (L x W x Th) | 80"L x 60"W x 18"Th (203 cm x 152 cm x 46 cm) |
| Material | Plastic (with Fibre-Tech interior) |
| Color | Grey |
| Item Weight | 3 Kilograms (6.6 lbs) |
| Maximum Weight Capacity | 600 Pounds (272 kg) |
| Inflation Time (Approx.) | 4 minutes |
| Power (Internal Pump) | 110-120V~, 60Hz, 0.65A |
| Water Resistance Level | Water Resistant |
| Item Firmness Description | Firm |
| UPC | 078257641253 |
8. Warranty and Support
This Intex Dura-Beam Essential Rest Airbed comes with a 90-day limited manufacturer's warranty. Please retain your proof of purchase for warranty claims.
For further assistance, troubleshooting, or to inquire about replacement parts, please contact Intex customer support. Refer to the packaging or the official Intex website for the most current contact information.
