AlveyTech White Horn Button User Manual

Introduction

This manual provides essential information for the installation, operation, and maintenance of the AlveyTech White Horn Button, a 2-pin momentary switch designed as a replacement part for various Go-Go and Pride Mobility Scooters. This component is crucial for the proper functioning of your scooter's horn, ensuring you can signal effectively.

Image: The AlveyTech White Horn Button, a compact 2-pin momentary switch.

Product Features

• Simplicity: Easy 2-wire connection for straightforward installation.
• Easy to Replace: Designed for simple, DIY installation with minimal tools required.
• Broad Compatibility: Compatible with a wide range of Go-Go and Pride Mobility scooter models.
• Manufacturer Part Number: Equivalent to Pride part number SWTPSHB1000.

Image: Diagram highlighting key features of the horn button switch, including simple 2-wire connection, compatibility with many Go-Go & Pride models, retrofit capability for Elite Traveller scooters, and cost savings from DIY repairs.

Setup and Installation

The AlveyTech White Horn Button is designed for a simple, do-it-yourself installation process. It requires only a few basic tools.

1. Preparation: Ensure your scooter is turned off and disconnected from any power source before beginning installation.
2. Access: Locate the existing horn button or the designated mounting area on your scooter's console. This may require removing a cover or panel.
3. Removal (if replacing): Carefully disconnect the two wires from the old horn button and remove it from its mounting.
4. Connection: Connect the two wires from your scooter's wiring harness to the two pins on the new AlveyTech horn button. The connection is non-polar, meaning the wire order does not matter.
5. Mounting: Insert the new horn button into its designated opening and secure it with the provided nut. Ensure it is snug but do not overtighten.
6. Reassembly: Reattach any covers or panels removed during the process.

Image: A scooter console with a red circle highlighting the typical location for the horn button, demonstrating where the new button would be installed.

Operating Instructions

The AlveyTech White Horn Button functions as a momentary switch. To operate the horn:

• Ensure your scooter's power is on.
• Press and hold the white button to activate the horn.
• Release the button to deactivate the horn.

Image: A hand pressing the white horn button on a scooter's control panel, illustrating the simple operation.

Maintenance

The AlveyTech White Horn Button is designed for durability and requires minimal maintenance. Follow these general guidelines:

• Cleaning: Use a soft, dry cloth to wipe the button clean. Avoid abrasive cleaners or solvents that could damage the plastic.
• Inspection: Periodically check the button for any signs of wear, damage, or loose connections. Ensure the mounting nut remains secure.
• Environmental Protection: While designed for outdoor use on mobility scooters, avoid prolonged exposure to extreme weather conditions (heavy rain, direct sunlight for extended periods) to maximize lifespan.

Troubleshooting

If your horn button is not functioning correctly, consider the following:

• No Horn Sound:
  • Check if the scooter's power is on.
  • Verify that the horn itself is functioning (e.g., by testing with a different switch if possible, or checking its wiring).
  • Inspect the two-wire connection to the horn button for looseness or corrosion.
  • Ensure the horn button is securely mounted and not jammed.
• Intermittent Function:
  • This could indicate a loose wire connection or internal wear of the switch. Re-check connections.

If troubleshooting steps do not resolve the issue, professional assistance may be required, or the horn button may need replacement.

Specifications

Image: Detailed diagram showing the dimensions of the horn button, including thread size (M12 x 1.50 mm), overall length (1-1/2" / 3.81 cm), and terminal dimensions.

Compatibility

This AlveyTech White Horn Button (SWTPSHB1000) is compatible with a variety of mobility scooter models. It is an original equipment replacement for the Go-Go Ultra X (SC40X/SC44X) scooter and can also retrofit other models, offering a cost-effective alternative to replacing entire console units.

Compatible Models:

• eWheels: EW-34 (EW-M34); EW-35 (EW-M35)
• Go-Go: Elite Traveller (SC40E/SC44E); Elite Traveller LR (SC40LR/SC44LR); Ultra X (SC40X/SC44X)
• Pride: Celebrity 2000 (SC4000/SC4400), Celebrity X (SC400/SC4001/SC440/SC4401); Celebrity XL Heavy Duty (SC445/SC4450DX); Dynamo (SC180); Hurricane (PMV500); Legend (SC300/SCVA300/SC340/SCVA340); Maxima (SC900/SC940); Sidekick (SC200); Sundancer (SC2000/SC202); Sundancer with Power Seat (SC2000PS); Wrangler (PMV 600/PMV 620/PMV 650)
• Shoprider: Scootie (TE-787NA)
• Vive: 3-Wheel Mobility Scooter; Vive 4-Wheel Mobility Scooter

Image: A visual representation of the horn button alongside a comprehensive list of compatible scooter models from various brands.

Warranty and Support

For specific warranty information regarding your AlveyTech White Horn Button, please refer to the product packaging or contact AlveyTech customer support directly. AlveyTech is committed to providing high-quality parts and accessories.

If you require further assistance with installation, troubleshooting, or have questions about compatibility, please visit the AlveyTech Store on Amazon or contact their customer service.