ARREGUI Supra 240160 Electronic Safe User Manual

1. Introduction

Thank you for choosing the ARREGUI Supra 240160 Electronic Safe. This manual provides essential information for the proper installation, operation, and maintenance of your safe. Please read these instructions carefully before using the product to ensure optimal security and functionality. Keep this manual for future reference.

2. Safety Information

• Always keep the emergency keys and your personal codes in a secure location, separate from the safe itself.
• Do not store the emergency keys inside the safe.
• Ensure the safe is installed on a stable surface or securely mounted to a wall or floor to prevent unauthorized removal.
• Replace batteries promptly when the low battery indicator appears to avoid being locked out.
• Avoid exposing the safe to extreme temperatures or humidity.

3. Package Contents

Verify that all components are present in the package:

• ARREGUI Supra 240160 Electronic Safe Unit
• Instruction Manual (this document)
• 2 Emergency Opening Keys
• Fixing Material (screws for installation)

4. Product Features

• Construction: Made of steel with a 6mm thick front and 2mm body.
• Locking Mechanism: Closure with two nickel-plated steel bolts, 20 mm diameter.
• Interior Lighting: Comfortable, energy-saving LED interior light that activates upon opening.
• Electronic Lock: Keypad-based electronic lock system.
• Code Options: Supports 2 possible opening codes: master and user. Codes can be 3 to 6 digits (1 million possible combinations).
• Security Feature: Temporarily blocked after entering 3 incorrect codes.
• Digital Display: 6-digit digital display shows help messages and low battery alerts.
• Power Source: Powered by 4 x AA 1.5V alkaline batteries (not included).
• Internal Storage: Includes a removable shelf for organized storage.

5. Setup

5.1. Battery Installation

1. Locate the battery compartment, typically on the inside of the safe door.
2. Open the battery cover.
3. Insert 4 new AA 1.5V alkaline batteries, ensuring correct polarity (+/-).
4. Close the battery cover securely.

5.2. Initial Opening (First Use)

For the first opening, or if you forget your code, use the emergency key:

1. Locate the emergency keyhole, usually concealed behind a small cover on the keypad panel.
2. Insert one of the provided emergency keys into the keyhole.
3. Turn the key clockwise (or counter-clockwise, depending on the lock) while simultaneously turning the safe's knob to open the door.
4. Once open, you can proceed to set your personal codes.

This image depicts the ARREGUI Supra 240160 electronic safe with its door open and an emergency key inserted into the manual override lock. This illustrates the method for emergency access.

5.3. Mounting the Safe

While the safe does not require work for installation, fastening it is recommended to reduce the risk of theft. The safe is designed for secure mounting to a wall or floor.

1. Identify a suitable location for the safe, ensuring it is level and secure.
2. The Model 240160 has 4 holes at the base and 4 at the back for mounting.
3. Mark the drilling points on the wall or floor using the safe's pre-drilled holes as a template.
4. Drill holes of appropriate diameter (9 mm) and depth for the included fixing screws.
5. Position the safe and secure it using the provided fixing material. Ensure all screws are tightened firmly.

6. Operating Instructions

6.1. Setting Your User Code

The user code is the primary code for daily access.

1. With the safe door open, locate the red or green reset button on the inside of the door or near the battery compartment.
2. Press the reset button. The display will show '------' or 'PROGRAM'.
3. Enter your desired 3 to 6 digit user code on the keypad.
4. Press the '#' or 'ENTER' button to confirm. The display will show 'GOOD' or 'SUCCESS'.
5. Test the new code with the door open before closing it.

6.2. Setting Your Master Code

The master code provides an alternative access method and can override the user code. Consult your specific model's detailed instructions for master code programming, as the procedure may vary slightly.

1. Typically, with the door open, press '0' twice, then the reset button.
2. Enter your desired 3 to 6 digit master code.
3. Press '#' or 'ENTER' to confirm.
4. Test the master code with the door open.

6.3. Opening the Safe

The ARREGUI Supra 240160 electronic safe is shown with its door securely closed. The electronic keypad and digital display are prominent on the front panel, ready for code entry.

1. Enter your 3 to 6 digit user or master code on the keypad.
2. The display will show 'OPEN' or 'GOOD'.
3. Within a few seconds, turn the knob clockwise (or counter-clockwise) to open the door.

6.4. Closing the Safe

This image displays the ARREGUI Supra 240160 electronic safe with its door open. The electronic keypad is visible on the door, along with the turning knob. The interior shows a light-colored shelf and a dark felt lining on the bottom.

1. Close the safe door firmly.
2. Turn the knob counter-clockwise (or clockwise) until the door is securely locked. The bolts will engage.

6.5. Digital Display Messages

• 'GOOD' / 'OPEN': Code accepted, safe can be opened.
• 'ERROR' / 'E-CODE': Incorrect code entered.
• 'HOLD' / 'LOCK': Safe is temporarily blocked after multiple incorrect entries. Wait for the lockout period to expire.
• 'LOW BATT': Batteries are low and need replacement.
• 'PROGRAM': Ready to accept a new code.

7. Emergency Opening

7.1. Using the Emergency Key

The emergency key provides access in situations such as forgotten codes, low batteries, or electronic keypad failure. Refer to section 5.2 for detailed steps.

7.2. External Power Supply

In case of completely discharged batteries, you can use an external 9V battery to power the safe temporarily.

1. Locate the external power plug, usually a small port on the keypad panel.
2. Connect a 9V battery to this port, ensuring correct polarity.
3. While holding the 9V battery in place, enter your code on the keypad.
4. Turn the knob to open the safe.
5. Once open, replace the internal AA batteries immediately.

8. Maintenance

• Battery Replacement: Replace the 4 AA batteries when the 'LOW BATT' indicator appears. Use only new alkaline batteries.
• Cleaning: Clean the exterior of the safe with a soft, damp cloth. Avoid abrasive cleaners or solvents.
• Code Testing: Periodically test your codes with the door open to ensure they are correctly programmed and remembered.
• Key Storage: Ensure emergency keys are stored safely and separately from the safe.

9. Troubleshooting

• Safe will not open with code:
  • Ensure batteries are fresh and correctly installed.
  • Verify the code entered is correct.
  • If 'HOLD' or 'LOCK' is displayed, wait for the temporary lockout period to expire.
  • Use the emergency key or external 9V battery for access.
• Display is blank or dim:
  • Replace the batteries.
  • Check battery polarity.
• Emergency key does not work:
  • Ensure the key is fully inserted and turned correctly while operating the knob.
  • If the key is damaged, contact customer support.

10. Specifications

This image provides a view inside the ARREGUI Supra 240160 safe. The door is open, revealing the bright green interior and a removable shelf. The two locking bolts are visible on the edge of the door.

This image shows the interior of the ARREGUI Supra 240160 safe with several items, including a camera, watch, and small boxes, placed on the shelf and bottom. This illustrates the practical storage capacity of the safe.

11. Warranty and Support

For warranty information and customer support, please refer to the documentation provided at the time of purchase or visit the official ARREGUI website. Keep your purchase receipt as proof of purchase for any warranty claims.