Introduction
The JBL Cruise Bluetooth Handlebar Speaker Kit is designed to provide audio entertainment for two-wheeled vehicles. This system features weather-resistant, Bluetooth-enabled speaker pods that mount to most motorcycles and scooters. It allows for wireless audio streaming from compatible devices and includes an integrated USB port for charging.
Image: Front view of the JBL Cruise Bluetooth Handlebar Speaker Kit, showing both speaker pods.
Package Contents
Verify that all items are present in the package:
- Two (2) Speakers: One speaker with an attached 9.5-foot harness and the other with an attached 22-inch harness.
- Quickstart Guide
- Safety Instructions
- Warranty Information
Note: Mirror integration mount kits are sold separately and are required for installation. These kits are available for various motorcycle makes, including Harley-Davidson models, and most scooters.
Setup and Installation
- Mounting Kit Selection: Obtain the appropriate JBL mirror integration mount kit for your specific vehicle (sold separately). Ensure compatibility with standard (right-handed) threaded mirrors.
- Speaker Placement: Position the speaker pods on your vehicle's handlebars using the selected mounting kit.
- Wiring Connection: Connect the speaker harnesses. The speaker with the longer 9.5-foot harness typically connects to the main power source or amplifier, while the speaker with the shorter 22-inch harness connects to the other speaker.
- Secure Installation: Ensure all mounting hardware is securely fastened to prevent movement during operation.
Image: View of the JBL Cruise speakers showing the wiring harness connection point between the two pods.
Important: The JBL Cruise audio system is designed to work exclusively with standard (right-handed) threaded mirrors. Verify your vehicle's mirror type before purchasing a mounting kit.
Operating Instructions
Powering On/Off
Refer to the Quickstart Guide for specific power button location and operation. Typically, a long press on the power button will turn the unit on or off.
Bluetooth Pairing
- Ensure the JBL Cruise speakers are powered on.
- Activate Bluetooth on your smartphone or other audio device.
- Search for available Bluetooth devices and select "JBL Cruise" from the list.
- Once paired, the speakers will indicate a successful connection (e.g., via an LED indicator or audio prompt).
The system uses Bluetooth 3.0 for connectivity, allowing wireless audio streaming from any Bluetooth-enabled device.
Audio Playback and Volume Control
Control audio playback (play/pause, skip tracks) and adjust volume directly from the speaker pods. The controls are designed for ease of use, even when wearing gloves.
USB Charging Port
An integrated USB port is available to charge your smartphone or other USB-powered devices while riding.
Image: Close-up view of a JBL Cruise speaker pod, highlighting the control buttons and speaker grille.
Maintenance and Care
The JBL Cruise speakers are IPX5-rated for weather resistance, meaning they are protected against low-pressure water jets from any direction. This rating ensures durability against rain and splashes during normal use.
- Cleaning: Use a soft, damp cloth to clean the speaker pods. Avoid abrasive cleaners or solvents that could damage the finish or internal components.
- Water Exposure: While weather-resistant, avoid submerging the speakers in water or exposing them to high-pressure water jets.
- Storage: When not in use for extended periods, store the speakers in a dry, cool environment.
- Inspection: Periodically check all connections and mounting hardware for tightness and signs of wear.
Troubleshooting
- No Power:
- Ensure the speakers are properly connected to a power source.
- Check all wiring connections for security.
- Verify the vehicle's power supply is active.
- No Sound/Low Volume:
- Confirm Bluetooth is successfully paired and connected to your device.
- Adjust the volume on both the speakers and your connected device.
- Ensure no audio cables are loose or damaged.
- In noisy environments, the perceived volume may be reduced. The speakers are designed to provide clear audio but may be affected by extreme external noise.
- Bluetooth Disconnection:
- Ensure your device is within the 10-meter Bluetooth range.
- Check for interference from other electronic devices.
- Try unpairing and re-pairing the device.
- Charging Issues:
- Verify the USB cable is securely connected to both the speaker and the device.
- Ensure the speakers are powered on for the USB charging function to operate.
For more detailed troubleshooting steps, refer to the included Quickstart Guide.
Specifications
| Model Name | PWSSPKCRUISECHAM |
| Speaker Type | Woofer, Tweeters |
| Speaker Size | 2.5 Inches (65 mm Audio Driver) |
| Maximum Output Power | 20 Watts per speaker |
| Frequency Response | 90 - 15,000 Hz |
| Connectivity Technology | Bluetooth 3.0 |
| Bluetooth Range | 10 Meters |
| Water Resistance Level | IPX5 (Weather Resistant) |
| Control Method | Touch |
| Material | Metal, Plastic |
| Product Dimensions | 17"D x 15.25"W x 9.75"H |
| Item Weight | 3 Pounds |
| Included Components | 2x Speakers, Quickstart guide, Safety instructions, Warranty information |
Warranty Information
This JBL Cruise Bluetooth Handlebar Speaker Kit is covered by a JBL 1 Year Manufacturer Warranty. Please refer to the included Warranty Information document for full terms and conditions, including details on coverage, limitations, and how to make a claim.
Keep your proof of purchase for warranty service.
Support
For further assistance, technical support, or to inquire about replacement parts, please consult the Quickstart Guide provided with your product. You may also visit the official JBL support website for additional resources and contact information.
Ensure you have your product model number (PWSSPKCRUISECHAM) and proof of purchase available when contacting support.
