OtterBox Defender Series Case for iPhone 11 Pro - Instruction Manual

1. Introduction

This manual provides essential information for the proper installation, use, and maintenance of your OtterBox Defender Series Case for iPhone 11 Pro. Designed for rugged protection, this case safeguards your device against drops, dust, and daily wear.

2. What's in the Box

• OtterBox Defender Series Case (multi-layer components)
• Holster Clip Kickstand

Image 1: The OtterBox Defender Series Case for iPhone 11 Pro, shown with its accompanying holster clip. The case is black and features a robust design.

3. Key Features

• Multi-layer Protection: Deflects shocks and absorbs impacts.
• Port Protection: Keeps out dust and debris from charging ports and jacks.
• Holster Clip: Functions as a belt clip and a kickstand for hands-free viewing.
• Screenless Design: Complements your touchscreen, allowing for direct screen interaction.

Image 2: A visual representation highlighting the key protective features of the Defender Series case, including multi-layer construction, belt clip/holster functionality, drop protection, and dust protection.

4. Installation Guide

Follow these steps to properly install your OtterBox Defender Series Case:

1. Separate the Case Components: The Defender Series case consists of multiple layers. Carefully peel away the outer soft slipcover from the inner hard shell. Then, separate the two halves of the hard shell by releasing the snaps along all four sides.
2. Place Your Device: Position your iPhone 11 Pro into the bottom half of the hard shell, ensuring the camera and buttons align with the case openings.
3. Assemble the Hard Shell: Place the top half of the hard shell onto your device and snap the two hard shell pieces together along all edges until they are securely fastened.
4. Apply the Soft Slipcover: Wrap the outer soft slipcover around the assembled hard shell. Press around all edges to ensure the slipcover is engaged in all grooves and notches for a secure fit.
5. Attach Holster (Optional): If desired, attach your phone (now in its case) to the holster clip. Ensure the screen faces inward for maximum protection when clipped.

Image 3: An exploded view illustrating the separate components of the Defender Series case, including the soft outer layer, the two hard inner shell pieces, and the iPhone 11 Pro itself, ready for assembly.

5. Operating the Holster Clip

The included holster clip serves multiple functions:

• Belt Clip: Securely attach your phone to your belt, bag, or strap for easy access.
• Kickstand: Rotate the clip to position your phone for hands-free viewing of media or video calls.

Image 4: The OtterBox Defender Series Case for iPhone 11 Pro shown with the holster clip attached, demonstrating its use as a carrying accessory.

6. Maintenance and Care

• Regularly inspect your case for any signs of wear or damage.
• Clean the case with a soft, damp cloth. Avoid harsh chemicals or abrasive materials.
• Ensure all port covers are properly sealed to prevent dust and debris ingress.

7. Troubleshooting

• Difficulty pressing buttons: Ensure the soft slipcover is correctly aligned and seated around the hard shell.
• Loose fit: Re-check that all snaps on the hard shell are securely closed and the soft slipcover is fully engaged.
• Dust accumulation: Remove the case, clean your device and the case thoroughly, then re-install following the installation guide.

8. Product Specifications

9. Warranty and Support

OtterBox products come with a limited warranty that covers material and workmanship defects. For detailed warranty information or to contact customer support, please refer to the official OtterBox website or the documentation included with your product.

For further assistance, visit the OtterBox Store on Amazon.