Introduction
This manual provides essential instructions for the setup, operation, and basic maintenance of your Easytry123 replacement remote control for Midea AC Air Conditioners. Please read this manual carefully to ensure proper use and to maximize the lifespan of your remote control.
This remote control is designed to be compatible with the following Midea AC Air Conditioner models:
- RG51I39/BGEFU
- RG51M5/EU
- MSC-30HRDN1-MP0W
- MSC-28CRDN1-MN15W
- MSC-36CRDN1-MN5W
Important Note:
Replacement remote controls may not support all functions of the original unit. Ensure your air conditioner model is listed above for compatibility.
Setup: Battery Installation
Your remote control requires batteries for operation. Batteries are not included with the remote control.
- Locate the battery compartment cover on the back of the remote control.
- Slide the cover downwards or press the latch and lift to open the compartment.
- Insert two (2) AAA batteries (not included), ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
- Replace the battery compartment cover by sliding it back into place until it clicks securely.
Figure 1: Back view of the remote control with the battery cover removed, illustrating the battery insertion points. The label shows "TYPE: RG51B1/BGE Rated voltage: 3VDC".
Operating Instructions
The remote control features various buttons to manage your Midea AC Air Conditioner. Point the remote control directly at the air conditioner's receiver when operating.
Figure 2: Front view of the remote control, displaying the LCD screen and various function buttons.
Button Functions:
- ON/OFF: Powers the air conditioner on or off.
- MODE: Cycles through operating modes (e.g., Cool, Heat, Fan, Dry, Auto).
- TEMP ▲/▼: Adjusts the temperature setting up or down.
- FAN/SLC: Adjusts fan speed or activates the Self-Clean function (if available on your AC model).
- SLEEP FRESH: Activates Sleep mode or Fresh air function (if available).
- TURBO SELFCLEAN: Activates Turbo mode for rapid cooling/heating or initiates a Self-Clean cycle.
- FP/EYE: Activates Freeze Protection or Eye-tracking function (if available).
- TIMER ON: Sets a timer for the air conditioner to turn on.
- TIMER OFF: Sets a timer for the air conditioner to turn off.
- LED FOLLOW ME: Controls the display light or activates the Follow Me function (if available).
Refer to your Midea air conditioner's original manual for detailed explanations of specific functions like "Self-Clean," "Sleep Fresh," "Turbo," "FP/EYE," and "Follow Me," as their availability and exact operation depend on your AC unit's model.
Maintenance
- Cleaning: Wipe the remote control with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery Replacement: Replace batteries when the remote's range decreases or it stops responding. Always replace both batteries at the same time with new ones of the same type (AAA).
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and damage.
Troubleshooting
- Remote not responding:
- Check if the batteries are inserted correctly with the correct polarity.
- Replace old batteries with new ones.
- Ensure there are no obstructions between the remote control and the air conditioner's receiver.
- Confirm the remote is pointed directly at the air conditioner.
- Limited functionality:
- As a replacement remote, some advanced or specific functions of your original air conditioner remote may not be supported. This is normal for universal or replacement remotes.
- Verify that your air conditioner model is explicitly listed as compatible in this manual.
- Short operating range:
- Replace the batteries.
- Ensure the remote's infrared emitter and the AC unit's receiver are clean and unobstructed.
Specifications
| Brand | Easytry123 |
| Compatible Devices | Midea AC Air Conditioners (Models: RG51I39/BGEFU, RG51M5/EU, MSC-30HRDN1-MP0W, MSC-28CRDN1-MN15W, MSC-36CRDN1-MN5W) |
| Connectivity Technology | Infrared |
| Controller Type | Button Control |
| Rated Voltage | 3V DC (Requires 2 x AAA batteries) |
| Special Feature | Ergonomic design |
Warranty and Support
This product is manufactured by Easytry123. For any issues or support inquiries regarding this remote control, please contact the seller directly through the platform where it was purchased.
As per general policy, replacement items may have varying warranty terms. Please refer to your purchase documentation or contact the seller for specific warranty information.
Seller: Easytry123