1. Introduction
This manual provides essential information for the safe and correct installation, operation, and maintenance of your BRILLIANT Matrix Wood 2-Light Pendant Lamp. Please read these instructions carefully before installation and retain them for future reference.
The BRILLIANT Matrix Wood pendant lamp features a rustic design with a combination of wood and metal, suspended by ropes. It is designed for indoor use, particularly suitable for dining areas.
2. Safety Instructions
- Electrical Safety: Installation must be performed by a qualified electrician or a competent person in accordance with local electrical codes and regulations. Always disconnect power at the main circuit breaker before installation, maintenance, or bulb replacement.
- Bulb Type: This lamp is designed for E27 bulbs, maximum 60W per socket. LED bulbs can be used. Ensure bulbs are suitable for the lamp's specifications.
- Dimming: The lamp is dimmable only when using dimmable bulbs and a compatible dimmer switch (not included).
- Mounting: Ensure the mounting surface can safely support the weight of the lamp. Use appropriate mounting hardware for your ceiling type.
- Handling: Handle the lamp with care to avoid damage to the wood, metal, or electrical components.
- Indoor Use Only: This product is intended for indoor use in dry locations. Do not expose to moisture or extreme temperatures.
3. Package Contents
Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.
- 1x BRILLIANT Matrix Wood 2-Light Pendant Lamp fixture
- Mounting hardware (screws, anchors, terminal block)
- Instruction Manual
Note: Light bulbs are not included and must be purchased separately.
4. Setup and Installation
Follow these steps carefully for proper installation. It is recommended to have a second person assist during installation.
4.1 Tools Required (Not Included)
- Screwdriver (Phillips head)
- Drill (if anchors are needed)
- Wire strippers
- Pliers
- Voltage tester
- Ladder
4.2 Installation Steps
- Turn off Power: Before starting, ensure the power supply to the installation area is completely switched off at the main circuit breaker.
- Prepare Mounting Surface: Mark the drilling points on the ceiling for the mounting bracket. Ensure the bracket is aligned correctly.
- Attach Mounting Bracket: Drill holes if necessary and secure the mounting bracket to the ceiling using the provided screws and anchors. Ensure it is firmly attached.
- Electrical Connection: Connect the lamp's electrical wires to the household wiring. Typically, this involves connecting:
- Live (L) wire (usually brown or black) to the lamp's live wire.
- Neutral (N) wire (usually blue) to the lamp's neutral wire.
- Earth (E) wire (usually green/yellow) to the lamp's earth wire.
- Secure Lamp Fixture: Carefully lift the lamp fixture and attach it to the mounting bracket. Ensure all connections are secure and the lamp is stable.
- Adjust Rope Length: The rope length can be adjusted with some effort to achieve the desired hanging height. This typically involves untying and retying the knots or adjusting the rope through the ceiling plate. Ensure both sides are even.
- Install Bulbs: Screw in the E27 light bulbs (not included) into the lamp sockets. Do not overtighten.
- Restore Power: Once installation is complete and all connections are secure, restore power at the main circuit breaker and test the lamp.
Figure 1: Front view of the BRILLIANT Matrix Wood 2-Light Pendant Lamp. This image shows the overall design with the wooden beam, rope suspension, and two metal cage light fixtures.
Figure 2: Close-up view illustrating the connection point of the rope to the wooden beam, highlighting the rustic metal bracket and the texture of the rope.
5. Operating Instructions
Operating the BRILLIANT Matrix Wood Pendant Lamp is straightforward:
- Switching On/Off: Use your standard wall switch to turn the lamp on or off.
- Dimming Function (Optional): If you have installed dimmable E27 bulbs and a compatible dimmer switch, you can adjust the light intensity using the dimmer switch.
6. Maintenance
Regular maintenance ensures the longevity and optimal performance of your lamp.
- Cleaning: Disconnect power before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Always disconnect power before replacing bulbs. Allow bulbs to cool completely before handling. Replace with E27 bulbs, maximum 60W.
- Inspection: Periodically check the electrical connections and mounting hardware for tightness and signs of wear.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not light up. |
|
|
| Lamp flickers. |
|
|
| Rope length uneven. |
|
|
If problems persist, consult a qualified electrician or contact Brilliant customer support.
8. Specifications
| Brand | Brilliant |
| Model Number | 99134/46 |
| Product Dimensions | 25 x 58 x 122.5 cm (L x W x H) |
| Item Weight | 3.79 Kilograms |
| Color | Black |
| Material | Metal, Wood |
| Style | Vintage |
| Light Fixture Form | Pendant |
| Room Type | Dining Room (General Home Use) |
| Power Source | AC |
| Special Features | Dimmable (with suitable bulbs and dimmer) |
| Light Source Type | LED compatible (E27 socket) |
| Bulbs Required | 2x E27, max 60W (not included) |
| Assembly Required | Yes |
| Batteries Required | No |
| Components Included | Mounting material |
9. Warranty and Support
For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official Brilliant website. Keep your proof of purchase for any warranty claims.
Manufacturer: Brilliant
