EVEO Premium Dual Monitor Mount

Introduction

Thank you for choosing the EVEO Premium Dual Monitor Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor arm. Designed for 14" to 35" screens, this mount enhances your workspace by providing flexible positioning and ergonomic benefits.

Figure 1: EVEO Premium Dual Monitor Mount in use.

Product Features

• Effortless Dual Monitor Setup: Designed for 14"-35" screens, compatible with VESA 75x75 and 100x100 mm patterns. Elevates monitors to reduce clutter and increase desk space.
• Quick and Easy Installation: Offers straightforward setup in approximately 5 minutes. Supports both sturdy desk clamp (0.39"-3.22" thickness) and grommet mount (0.39"-2.67" thickness) options.
• Flexible Viewing Angles: Provides unparalleled flexibility with 360° rotation and +90° to -90° swivel for optimal screen positioning.
• Ergonomic Design: Promotes optimal comfort by allowing users to maintain the perfect angle between eyes and monitors, alleviating neck and back strain.
• Built to Last: Constructed from high-quality alloy steel for maximum sturdiness and durability.

Setup and Installation

The EVEO Dual Monitor Mount offers two primary installation methods: Desk Clamp and Grommet Mount. Choose the method that best suits your desk and preferences.

1. Unboxing and Component Check

Carefully unpack all components and verify against the packing list. Ensure all parts are present and undamaged before proceeding with installation.

2. Attaching VESA Plates to Monitors

Attach the VESA plates to the back of your monitors using the provided screws. Ensure the plates are securely fastened to the VESA mounting holes (75x75mm or 100x100mm).

Figure 2: VESA plate attachment to the monitor arm.

3. Choosing Your Mount Type

3.1. Desk Clamp Installation

For desks with a thickness between 0.39" and 3.22".

1. Assemble the desk clamp base.
2. Attach the anti-slip protective pads to the clamp surfaces to prevent damage to your desk.
3. Position the clamp on the edge of your desk and tighten the screw until it is secure.
4. Insert the main pole into the clamp base and secure it.

3.2. Grommet Mount Installation

For desks with a grommet hole and thickness between 0.39" and 2.67".

1. Disassemble the desk clamp and reconfigure it for grommet installation.
2. Insert the grommet base through the desk hole.
3. Secure the base from underneath the desk using the provided plate and nut.
4. Insert the main pole into the grommet base and secure it.

4. Attaching Monitor Arms

Slide the monitor arms onto the main pole. Adjust their height and orientation as needed before tightening the securing screws.

Figure 3: Monitor arm assembly and cable management.

Operating and Adjustments

The EVEO monitor mount features a gas spring system for smooth and effortless adjustments.

1. Height Adjustment

To adjust the monitor height, gently push or pull the monitor up or down. The gas spring will hold it in place. You may need to adjust the tension for heavier or lighter monitors.

2. Tilt Adjustment

The monitor can be tilted +90° to -90° to reduce glare and optimize viewing angles. Loosen the tilt screw, adjust the angle, and then re-tighten.

Figure 4: Monitor tilt adjustment.

3. Swivel and Rotation

Swivel the monitor arms left or right for flexible positioning. The VESA plate also allows for 360° rotation, enabling easy switching between landscape and portrait modes.

Figure 5: Monitor swivel adjustment.

Figure 6: Monitor 360° rotation.

4. Cable Management

Utilize the integrated cable management clips along the arms to route and conceal your monitor cables, maintaining a tidy workspace.

Maintenance

• Regularly check all screws and connections to ensure they remain tight and secure.
• Clean the monitor arm surfaces with a soft, damp cloth. Avoid abrasive cleaners that may damage the finish.
• If the gas spring tension feels too loose or too stiff, adjust it using the provided Allen wrench according to the instructions in the operating section.

Troubleshooting

Specifications

• Brand: EVEO
• Model Number: Dual Monitor arm
• Material: Alloy Steel
• Color: Black
• Compatible Monitor Sizes: 14 inches to 35 inches
• VESA Compatibility: 75x75 mm, 100x100 mm
• Mounting Type: Desk Clamp or Grommet Mount
• Desk Clamp Thickness Range: 0.39" - 3.22"
• Grommet Mount Thickness Range: 0.39" - 2.67"
• Movement Type: Articulating
• Tilt Angle: +90° to -90°
• Rotation: 360°
• Swivel: +90° to -90°
• Item Weight: 8.51 pounds
• Package Dimensions: 16.89 x 11.61 x 4.88 inches
• Country of Origin: China

Warranty and Customer Support

EVEO stands behind the quality and durability of its products. For any questions, concerns, or support needs, please contact our customer service team. We are committed to providing outstanding customer support to ensure your experience is fulfilling.

Please refer to your purchase documentation for specific warranty details and contact information.