1. Introduction
This manual provides essential instructions for the assembly, operation, and maintenance of your Acme Lianna Twin Daybed and Trundle. Please read this manual thoroughly before assembly and use to ensure safe and correct operation. Keep this manual for future reference.
Image 1.1: The Acme Lianna Twin Daybed with its trundle unit stored underneath.
2. Safety Information
- Read all instructions: Ensure all assembly steps are followed correctly. Incorrect assembly can lead to instability and injury.
- Adult assembly required: This product requires adult assembly. Keep small parts away from children during assembly.
- Weight capacity: Do not exceed the maximum weight capacity of 400 pounds for the daybed and trundle combined.
- Level surface: Always place the daybed on a flat, level surface to prevent tipping.
- Regular checks: Periodically check all bolts and fasteners to ensure they are tight. Retighten as necessary.
- Avoid jumping: Do not jump on the daybed or trundle.
- Chemical warning: This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.
3. Package Contents
Before beginning assembly, verify that all components are present and undamaged. Refer to the separate assembly instruction sheet for a detailed list of parts and hardware.
- Upholstered Daybed Frame (Main Unit)
- Twin-sized Trundle Unit with Casters
- Slat System for Daybed
- Slat System for Trundle
- Assembly Hardware (bolts, screws, tools, etc. - refer to specific assembly guide)
4. Setup and Assembly
Assembly of the Acme Lianna Twin Daybed and Trundle is required. Please follow the detailed step-by-step instructions provided in the separate assembly guide included with your product packaging. Ensure you have adequate space and the necessary tools before starting.
- Unpack all components: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent scratches.
- Identify parts: Match all parts against the parts list in the assembly guide.
- Assemble the main daybed frame: Follow the instructions to connect the upholstered frame sections.
- Install the slat system: Securely attach the wooden slats to the daybed frame. No box spring is required.
- Assemble the trundle unit: Construct the trundle frame and install its slat system and casters.
- Insert trundle: Slide the assembled trundle unit under the main daybed frame.
- Final check: Ensure all connections are tight and the daybed is stable before use.
Image 4.1: The daybed and trundle with their respective slat systems visible, ready for mattresses.
5. Operating Instructions
5.1 Using the Trundle
The twin-sized trundle unit is designed for convenient storage and easy deployment for an additional sleeping surface.
- To deploy the trundle: Gently pull the trundle unit from underneath the main daybed frame. The casters allow for smooth movement.
- To store the trundle: Push the trundle unit back underneath the main daybed frame until it is fully recessed.
Image 5.1: The trundle unit extended with a mattress in place, ready for use.
6. Maintenance and Care
Proper care will extend the life and appearance of your daybed.
- Cleaning the fabric: For general cleaning, vacuum the upholstered fabric regularly using a soft brush attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner or use a fabric-specific cleaning solution, testing on an inconspicuous area first.
- Frame care: Wipe the visible frame components with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
- Hardware: Periodically check and tighten all bolts and screws to ensure the daybed remains stable.
- Sunlight exposure: Avoid placing the daybed in direct sunlight for prolonged periods, as this can cause fabric fading.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Daybed feels unstable or wobbly. | Loose hardware. Uneven floor surface. | Ensure all bolts and screws are securely tightened. Move the daybed to a level surface or use furniture levelers. |
| Trundle does not slide smoothly. | Obstruction under the daybed. Damaged casters. | Check for any objects blocking the trundle's path. Inspect casters for damage; contact support if damaged. |
| Fabric appears discolored or stained. | Spills not cleaned promptly. Prolonged sun exposure. | Refer to the "Maintenance and Care" section for cleaning instructions. Consider repositioning the daybed to avoid direct sunlight. |
8. Specifications
| Model Number | AC-39395 |
| Brand | Acme |
| Dimensions (L x W x H) | 84" x 42" x 39" (213.36 cm x 106.68 cm x 99.06 cm) |
| Item Weight | 130 Pounds (58.97 kg) |
| Maximum Weight Capacity | 400 Pounds (181.44 kg) |
| Material | Fabric (Fog Fabric) |
| Color | Fog Fabric |
| Assembly Required | Yes |
| Box Spring Required | No (Slat System Included) |
Image 8.1: Key dimensions of the Acme Lianna Twin Daybed.
9. Warranty and Support
The Acme Lianna Twin Daybed and Trundle comes with a limited warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the official warranty document included with your purchase or visit the Acme Furniture official website. For product support, missing parts, or further assistance, please contact Acme Furniture customer service directly.
Manufacturer: Acme Furniture
Contact Information: Please refer to the product packaging or the official Acme Furniture website for the most current customer service contact details.
