Victoper torch

Victoper Wesho Rechargeable Headlamp User Manual

Model: Torch

Introduction

Thank you for choosing the Victoper Wesho Rechargeable Headlamp. This manual provides essential information for the safe and efficient use of your headlamp. Please read it thoroughly before operation and retain it for future reference.

Victoper Wesho Rechargeable Headlamp showing its three LED lights and adjustable strap.

Image: The Victoper Wesho Rechargeable Headlamp, highlighting its design and multiple light sources.

Safety Information

  • Eye Safety: Do not look directly into the LED light or shine it directly into the eyes of others. The high intensity light can cause temporary vision impairment or permanent eye damage.
  • Battery Safety: Use only the specified battery type. Do not attempt to disassemble, crush, or expose the battery to extreme temperatures or fire. Dispose of batteries according to local regulations.
  • Water Resistance: The headlamp is rated IPX5 waterproof, meaning it is protected against low-pressure water jets from any direction. It is suitable for use in rain but should not be submerged in water.
  • Children: Keep the headlamp out of reach of children.
  • Heat: The headlamp may become warm during prolonged use. This is normal. Avoid direct contact with skin if it becomes excessively hot.

Package Contents

Please check the package for the following items:

  • 1 x Victoper Wesho Rechargeable Headlamp
  • 1 x USB Charging Cable
  • 1 x Lithium Metal Battery (pre-installed)

Setup

1. Initial Charging

Before first use, fully charge the headlamp. Connect the provided USB cable to the headlamp's charging port and to a standard USB power source (e.g., computer, wall adapter). The battery requires approximately 8 hours for a full charge.

2. Adjusting the Headband

The headlamp features adjustable straps for maximum comfort and a secure fit. Adjust the elastic bands to fit snugly around your head or over a helmet. Ensure the headlamp is centered on your forehead for optimal light distribution.

Comparison image highlighting the Victoper headlamp's soft headband, lightweight battery, and environmentally friendly material against a generic alternative.

Image: Features of the Victoper headlamp, including its soft headband and lightweight design.

Operating Instructions

1. Power On/Off and Mode Selection

Press the power button located on the headlamp to cycle through the available lighting modes:

  1. Mode 1: Bright light (center LED only)
  2. Mode 2: Bright light (two side LEDs)
  3. Mode 3: Three lights (all LEDs)
  4. Mode 4: Strobe (all LEDs flashing)

Press the button again after Mode 4 to turn the headlamp off.

Diagram showing the four lighting modes of the Victoper headlamp: Strobe, 1x LED, 2x LED, and 3x LED.

Image: Illustration of the four distinct lighting modes available on the headlamp.

2. Beam Angle Adjustment

The headlamp head can be rotated up to 90 degrees downwards. This allows you to direct the light precisely where needed, improving visibility and avoiding obstacles on the ground.

Diagram illustrating the 90-degree rotation adjustment feature of the headlamp, showing how the light can be angled downwards.

Image: Demonstrating the 90-degree adjustable beam angle for versatile illumination.

Charging Instructions

To charge the headlamp, locate the USB charging port. Plug the small end of the provided USB cable into the headlamp's port and the larger end into a compatible USB power source. A full charge takes approximately 8 hours and provides 7 to 8 hours of runtime, depending on the mode used.

Note: Ensure the charging port cover is securely closed after charging to maintain the headlamp's water resistance.

Maintenance

1. Cleaning

Wipe the headlamp with a soft, damp cloth to remove dirt or debris. Do not use abrasive cleaners or solvents, as these can damage the surface or internal components.

2. Storage

Store the headlamp in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, ensure the battery is partially charged and recharge it every few months to maintain battery health.

3. Water Resistance

The headlamp has an IPX5 water resistance rating. This means it is protected against splashing water from any angle. Do not immerse the headlamp in water.

Troubleshooting

  • Headlamp not turning on: Ensure the battery is fully charged. Check if the battery is correctly inserted.
  • Light is dim: The battery may be low. Recharge the headlamp.
  • Headlamp not charging: Verify that the USB cable is securely connected to both the headlamp and the power source. Try a different USB cable or power source.
  • Intermittent operation: Ensure all connections are secure. If the issue persists, contact customer support.

Specifications

ParameterValue
BrandVictoper
Model NumberTorch
MaterialAluminum Alloy
Light Source1 x L2 LED + 2 x R2 LED Bulbs
Luminous Flux5000 lumens
Beam Distance150 - 400 meters
Lighting Modes4 modes (Bright, Side, All, Strobe)
Battery Type1 x Lithium Metal (included)
Voltage3.6 Volts
Charging TimeApprox. 8 hours
Runtime7-8 hours (depending on mode)
Water ResistanceIPX5
Weight270 g
Victoper headlamp demonstrating ultra-bright, wide-range headlights with 6000 lumens and a 100-meter max beam range in a dark outdoor setting.

Image: The headlamp's powerful illumination, highlighting its wide beam and long range.

Warranty and Support

For any issues or questions regarding your Victoper Wesho Rechargeable Headlamp, please contact our customer support. We are committed to resolving any problems you may encounter as quickly as possible.

Please refer to your purchase documentation for specific warranty terms and contact information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.