Introduction
This manual provides instructions for the safe and effective use of your ReadyWired Wall Charger Adapter Cable Cord. This charger is designed to provide power to compatible Aukey power banks, specifically models PB-N37, PB-T3, and PB-N42. Please read this manual thoroughly before using the product.
Safety Information
- Use this product indoors only. Do not expose to rain, moisture, or extreme temperatures.
- Inspect the charger and cable for any signs of damage before each use. Do not use if damaged.
- Keep out of reach of children and pets.
- Do not attempt to disassemble or modify the charger.
- Ensure the wall outlet is easily accessible and unplug the charger when not in use or during electrical storms.
- Only use with compatible devices as specified.
Setup
- Unpack the Charger: Carefully remove the ReadyWired Wall Charger Adapter Cable Cord from its packaging.
- Connect to Power Outlet: Plug the 2-pin main power connector of the wall charger into a standard, functional electrical wall outlet.
- Connect to Power Bank: Insert the barrel connector end of the cable into the charging port of your compatible Aukey power bank (PB-N37, PB-T3, or PB-N42). Ensure a firm connection.
Image 1: ReadyWired Wall Charger Adapter Cable Cord. This image shows the compact design of the wall charger with its integrated cable and barrel connector.
Operating Instructions
Once the charger is properly set up and connected to your Aukey power bank:
- Initiate Charging: The power bank should automatically begin charging. Refer to your power bank's manual for specific charging indicators (e.g., LED lights).
- Monitor Charging: Allow the power bank to charge until it reaches full capacity, as indicated by the power bank itself.
- Disconnect: Once charging is complete, first disconnect the barrel connector from the power bank, then unplug the wall charger from the electrical outlet.
Maintenance
- Cleaning: Disconnect the charger from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
- Storage: Store the charger in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cable too tightly.
- Inspection: Periodically inspect the cable and connectors for fraying, bends, or other damage. Replace the charger if any damage is observed.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Power bank not charging. | Loose connection, faulty outlet, damaged charger, incompatible device. | Ensure all connections are secure. Try a different wall outlet. Inspect the charger for damage. Confirm power bank compatibility (Aukey PB-N37, PB-T3, PB-N42). |
| Slow charging. | Power bank issue, charger not fully connected. | Ensure the barrel connector is fully inserted into the power bank. Refer to your power bank's manual for charging speed expectations. |
Specifications
- Brand: ReadyWired
- Cable Length: 3 Ft.
- Connector Type: Barrel Connector
- Power Source: Corded Electric
- Main Power Connector Type: 2 Pin
- Compatibility: Aukey PB-N37, PB-T3, PB-N42 Power Banks
- UPC: 305978372716
Warranty and Support
For warranty information or technical support, please contact ReadyWired directly through their official website or customer service channels. Keep your purchase receipt as proof of purchase.
