Introduction
Thank you for choosing the Leader Accessories LA-502613 Bar Stool. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
Image: Two Leader Accessories bar stools with light grey PU leather seats and chrome bases, positioned at a kitchen island.
Safety Information
For your safety and to ensure the longevity of your bar stools, please observe the following:
- Ensure the total weight on the stool does not exceed 200 kg (440 lbs) to maintain stability.
- Always place the stool on a flat and stable surface to prevent tipping.
- Do not stand on the stool.
- Keep children away from the stool during assembly.
- Regularly check all screws and connections to ensure they are tight.
Package Contents
Each set includes the following components. Please verify all parts are present before beginning assembly.
- 2 x Seat with Backrest (PU Leather, Light Grey)
- 2 x Gas Lift Cylinder
- 2 x Footrest Ring
- 2 x Base Plate (Chrome Steel)
- 2 x Protective Cap for Gas Lift
- Assembly Hardware (screws, washers, Allen key)
Setup and Assembly
Assembly of each bar stool is designed to be quick and straightforward, typically completed in three simple steps.
- Attach the Footrest to the Gas Lift: Remove the protective cap from the top of the gas lift cylinder. Slide the footrest ring onto the gas lift cylinder. Ensure it is securely seated.
- Insert Gas Lift into Base: Place the chrome steel base plate on a flat surface. Insert the bottom end of the gas lift cylinder into the central hole of the base plate. The gas lift should fit snugly.
- Attach Seat to Gas Lift: Align the mounting plate under the seat with the top of the gas lift cylinder. Press the seat firmly onto the gas lift. The weight of the user will help secure the connection.
Image: Detailed view of the gas lift cylinder and the footrest ring, indicating the SGS certification.
Image: Close-up of the bright plating chassis (base) and the footrest, highlighting the design.
Repeat these steps for the second bar stool.
Operating Instructions
Adjusting Seat Height
The bar stool features an adjustable height mechanism for personalized comfort. To adjust the height:
- To raise the seat: While standing, pull the lever located under the seat upwards. The seat will automatically rise. Release the lever when the desired height is reached.
- To lower the seat: While seated, pull the lever located under the seat upwards. The seat will lower under your weight. Release the lever when the desired height is reached.
Swivel Function
The seat can rotate 360 degrees, allowing for easy movement and interaction without needing to reposition the entire stool.
Maintenance
Proper care will extend the life and appearance of your bar stools.
- Cleaning the PU Leather Seat:
Image: Close-up texture of the light grey PU leather seat, showing the quilted design.
Wipe the PU leather surface with a soft, damp cloth. For stubborn stains, use a mild soap solution and then wipe clean with a dry cloth. Avoid abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the material.
- Cleaning the Chrome Steel Base:
Wipe the chrome parts with a soft, dry cloth to remove dust and fingerprints. For smudges, use a chrome cleaner or a damp cloth with a small amount of mild detergent, then polish with a dry cloth. Avoid abrasive pads or cleaners that can scratch the chrome finish.
- Regular Checks: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and safety.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool wobbles or is unstable. | Loose connections or uneven floor. | Ensure all screws are tightened. Place the stool on a flat, even surface. |
| Height adjustment not working. | Gas lift cylinder issue or lever malfunction. | Check if the protective cap on the gas lift was fully removed during assembly. Ensure the lever mechanism is not obstructed. If the issue persists, the gas lift may need replacement. |
| Squeaking noise during swivel. | Lack of lubrication in the swivel mechanism. | Apply a small amount of silicone-based lubricant to the swivel mechanism under the seat. |
Specifications
Image: Technical drawing illustrating the dimensions of the bar stool, including seat width, depth, backrest height, and adjustable height range.
- Model Number: LA-502613
- Material: PU Leather (seat), Chrome Steel (frame, base)
- Color: Light Grey
- Overall Dimensions (per stool): 37 cm (D) x 40 cm (W) x 91-112 cm (H)
- Seat Dimensions: 37 cm (D) x 40 cm (W)
- Backrest Height: 30 cm
- Adjustable Seat Height: 62-83 cm (approx. 24.4 - 32.7 inches)
- Base Diameter: 38.5 cm
- Weight Capacity (per stool): 200 kg (440 lbs)
- Product Weight (per stool): Approximately 7.25 kg
Warranty Information
Leader Accessories products are manufactured to high-quality standards. For specific warranty details, please refer to the purchase documentation or contact your retailer. This warranty typically covers manufacturing defects under normal use.
Customer Support
If you have any questions, require assistance with assembly, or need to report a missing or damaged part, please contact Leader Accessories customer service through your original point of purchase or visit the official Leader Accessories website for support options.
For more information, you may visit the Leader Accessories Store on Amazon.
