1. Introduction
This manual provides detailed instructions for the assembly, operation, and maintenance of your BANDAI SPIRITS Digimon Wargreymon (Amplified) Figure-Rise Standard Model Kit. Please read this manual thoroughly before beginning assembly to ensure proper construction and to maximize your enjoyment of the product.
Figure 1: Fully assembled Wargreymon (Amplified) model kit.
2. Safety Information
WARNING: CHOKING HAZARD - Small parts. Not for children under 3 years.
Always handle small parts with care. Keep all components out of reach of young children. Use appropriate tools for assembly to prevent injury.
3. What's in the Box
Your model kit package contains:
- Multiple plastic runners (sprues) with various colored parts.
- Instruction booklet.
- Sticker sheet for detailing.
- Additional accessories for articulation and display.
Figure 2: Example of plastic runners containing model kit parts.
4. Setup and Assembly
Assembly of the Wargreymon (Amplified) model kit requires careful attention to detail. No glue is required as parts are designed to snap together.
4.1 Recommended Tools
- Nippers/Side Cutters: For cleanly removing parts from the runners.
- Hobby Knife/Exacto Knife: For trimming nubs and fine details.
- Tweezers: Highly recommended for precise application of small stickers.
- Sanding Sticks/Files: For smoothing cut surfaces (optional).
4.2 Assembly Steps
- Unpack Components: Carefully remove all plastic runners and the instruction manual from the box. Organize parts by runner letter for easier access.
- Follow Instructions: Refer to the included instruction booklet for step-by-step assembly. Each step will illustrate which parts to cut and how to connect them.
- Part Removal: Use nippers to carefully cut parts from the runners. Cut slightly away from the part first, then trim closer to avoid stress marks or damage.
- Connecting Parts: Align parts correctly and press firmly until they snap into place. Avoid excessive force.
- Sticker Application: Apply stickers as indicated in the manual. For small or intricate stickers, use tweezers for precise placement. Start with one edge and smooth it down to prevent air bubbles.
- Waist Connection Tip: Pay close attention to the orientation of the waist connector part. Ensure the tapered end is pointing upwards as per the instructions to avoid difficulty during assembly.
Figure 3: Example of a hand assembling a model kit component.
4.3 Assembly Overview Video
Video 1: An overview of the Wargreymon (Amplified) model kit, showcasing its components and assembled form. This video provides a visual guide to the product's contents and final appearance.
5. Operating and Features
The Wargreymon (Amplified) model kit is designed with impressive dynamic articulation and various gimmicks for display and posing.
- Dynamic Articulation: The model features multiple points of articulation allowing for a wide range of poses. Carefully move joints to avoid breakage.
- Brave Shield: The Brave Shield can be mounted on the model's back or arm. It includes expanding parts for different display configurations.
- Dramon Killers: The claws on the arms, known as Dramon Killers, have movable parts and can be combined for various attack poses.
6. Maintenance
To ensure the longevity and appearance of your Wargreymon (Amplified) model kit, follow these maintenance guidelines:
- Cleaning: Dust the model regularly with a soft brush or a microfiber cloth. Avoid using harsh chemicals or abrasive materials.
- Handling: Handle the model by its main body parts to avoid stressing delicate joints or accessories.
- Storage: Store the model away from direct sunlight, extreme temperatures, and high humidity to prevent material degradation or discoloration.
7. Troubleshooting
If you encounter any issues during assembly or display, consider the following:
- Parts Not Fitting: Ensure parts are correctly oriented and that any excess plastic (nubs) has been fully removed from the connection points. Do not force parts together.
- Sticker Alignment: If stickers are difficult to align, use tweezers and apply them slowly from one edge to the other. A small amount of water can sometimes help reposition water-slide decals (if applicable, check sticker type).
- Loose Joints: If a joint feels too loose, a thin layer of clear nail polish or hobby cement on the peg (allow to dry completely before reassembly) can increase friction.
8. Specifications
| Attribute | Value |
|---|---|
| Product Dimensions | 2 x 2 x 6.69 inches |
| Item Weight | 1.3 pounds |
| ASIN | B07TYH8J2X |
| Item Model Number | 2506682 |
| Manufacturer Recommended Age | 15 years and up |
| Manufacturer | Bandai Spirits |
| Date First Available | July 3, 2019 |
9. Warranty and Support
For specific warranty information or product support, please refer to the official Bandai Spirits website or contact their customer service directly. This product is an officially licensed item, as indicated by the Bandai Namco warning label on the product box.
You can find more information and products from the brand at the BANDAI SPIRITS Store on Amazon.
