Acme Sawyer Queen Bed with Storage and LED Lighting - Model AC-27970Q Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Acme Sawyer Queen Bed with Storage and LED Lighting, Model AC-27970Q. Please read this manual thoroughly before beginning assembly or use to ensure safe and correct operation and to maximize the lifespan of your product.

Image: Front view of the Acme Sawyer Queen Bed, showcasing the upholstered headboard, metallic gray finish, and integrated LED lighting.

Safety Information

WARNING: Failure to follow these safety instructions may result in injury or damage to the product.

• Exercise caution around sharp edges during assembly and use.
• Ensure all components are properly assembled and tightened to prevent instability.
• Do not exceed the maximum weight capacity of 280 lbs for the bed frame.
• Keep small parts away from children during assembly.
• Always lift with assistance when moving heavy components.

Package Contents

Verify that all components listed below are present before beginning assembly. If any parts are missing or damaged, contact Acme customer support immediately.

• Headboard
• Footboard
• Side Rails
• Storage Drawers (for footboard)
• Bed Slats (Box Spring NOT Required)
• Assembly Hardware (screws, bolts, washers, Allen wrench)
• LED Lighting Kit (if applicable)

Note: Mattress is not included with the bed frame.

Setup and Assembly

Assembly of the Acme Sawyer Queen Bed is required. It is recommended that two adults perform the assembly. Clear a spacious area for assembly and keep all tools and hardware within reach.

Image: The Acme Sawyer Queen Bed frame with its storage drawers extended, illustrating the slat support system that eliminates the need for a box spring.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface (e.g., a blanket or carpet) to prevent scratches. Identify each component using the parts list provided in your hardware kit.
2. Attach Rails to Headboard and Footboard: Secure the side rails to the headboard and footboard using the provided bolts and washers. Ensure all connections are firm and tightened evenly. Do not overtighten.
3. Install Slats: Place the bed slats across the side rails. Secure them to the rails using the designated hardware (screws or clips) as per the assembly diagram. These slats provide direct mattress support, eliminating the need for a box spring.
4. Assemble Storage Drawers: Follow the specific instructions for assembling the storage drawers. Once assembled, carefully install them into the designated slots in the footboard. Ensure they slide smoothly.
5. Connect LED Lighting: If your model includes LED lighting, connect the LED strip to the power adapter and route the wiring as indicated in the assembly guide. Secure any loose wires. Plug the adapter into a power outlet and test the lighting functionality.
6. Final Inspection: Before placing a mattress, double-check all connections and ensure the bed frame is stable, level, and all hardware is securely fastened.

For detailed visual instructions, refer to the assembly diagram included with your product packaging.

Operating Instructions

LED Lighting

The Acme Sawyer Queen Bed features integrated LED lighting in the headboard. To operate:

• Locate the LED power switch, typically found on the headboard or an attached cable.
• Toggle the switch to turn the LED lights ON or OFF.
• If your model includes a remote control, refer to its specific instructions for adjusting brightness or color settings.

Storage Drawers

The integrated storage drawers provide convenient space for bedding, clothing, or other items.

• Gently pull the drawer handles to open the drawers.
• Push the drawers firmly and evenly to close them completely.
• Avoid overloading the drawers to ensure smooth operation and prevent damage to the drawer slides.

Maintenance

Proper care will extend the life and appearance of your Acme Sawyer Queen Bed.

• Cleaning Upholstery: For the upholstered sections of the headboard, follow the