Pyrex 7402-PC

Pyrex 7402-PC 6/7-Cup Blue Replacement Lid Instruction Manual

Model: 7402-PC

1. Product Overview

The Pyrex 7402-PC 6/7-Cup Blue Replacement Lids are designed to provide a secure seal for compatible Pyrex glass bowls, facilitating food storage and preservation. These lids are made from durable, BPA-free plastic and are suitable for various food preparation and storage needs.

Two Pyrex 7402-PC blue replacement lids, viewed from the top, showing the 'Pyrex Storage' branding.

Image 1: Pyrex 7402-PC Blue Replacement Lids (2-Pack)

2. Product Features

  • Compatibility: Specifically designed for Pyrex 6-cup (model 7402) sculpted glass mixing bowls and 7-cup (model 7203) glass bowls.
  • Durable Material: Constructed from BPA-free, non-porous plastic that resists wear, stains, and odors.
  • Versatile Use: Safe for use in refrigerators, freezers, and microwaves.
  • Easy Cleaning: Top-rack dishwasher safe for convenient maintenance.
  • Secure Seal: Engineered for a tight fit to help keep food fresh.
  • Origin: Made in the USA.

3. Compatibility and Setup

To ensure proper fit, verify the model number located on the bottom of your Pyrex glass bowl. These lids are designed to fit bowls marked with "7402" (6-cup sculpted mixing bowl) or "7203" (7-cup glass bowl). The replacement lid itself is identified as "7402-PC".

Important: These lids are not compatible with Anchor Hocking containers or other brands of bowls. Always confirm the model number on your bowl before attempting to use the lid.

Bottom view of two Pyrex 7402-PC blue replacement lids, showing embossed text with usage instructions and model numbers.

Image 2: Underside of Pyrex 7402-PC Lids, showing model identification.

4. Operating Instructions (Usage)

These Pyrex replacement lids are designed for convenient food storage and reheating. Follow these guidelines for optimal use:

  • Applying the Lid: Place the lid firmly onto the rim of the compatible Pyrex glass bowl. Press down around the edges to create a secure seal.
  • Refrigeration and Freezing: The lids are safe for storing food in both the refrigerator and freezer. Ensure the lid is properly sealed before placing the bowl in cold storage.
  • Microwave Use: The lids can be used in the microwave for reheating food. To allow steam to escape and prevent pressure buildup, slightly vent the lid by lifting one edge before microwaving. Avoid using the lid in conventional ovens or under broiler settings.
  • Food Storage: The non-porous plastic helps resist food odors, flavors, and stains, keeping your stored food fresh.
Two Pyrex 7402-PC blue replacement lids, shown from a slightly elevated angle.

Image 3: Pyrex Lids ready for use.

5. Maintenance and Care

Proper care will extend the life of your Pyrex replacement lids:

  • Dishwasher Safe: These lids are safe for cleaning in the dishwasher. For best results and to prevent warping, place them on the top rack only.
  • Hand Washing: If hand washing, use warm, soapy water and a soft sponge or cloth. Rinse thoroughly and allow to air dry.
  • Avoid Harsh Abrasives: Do not use abrasive cleaners or scouring pads, as these can scratch or damage the plastic.
  • Stain Prevention: While resistant, certain foods (e.g., tomato-based sauces) may cause staining over time. Prompt cleaning after use can help minimize this.

6. Troubleshooting

If you encounter issues with your Pyrex replacement lids, consider the following:

  • Lid Does Not Fit: Double-check the model number on the bottom of your glass bowl. Ensure it is either "7402" or "7203". These lids are not universal and will not fit other Pyrex models or other brands.
  • Lid Feels Loose or Too Tight: A new lid may feel slightly tight initially. With regular use, the plastic may adapt. Ensure the bowl rim is clean and free of food debris before applying the lid.
  • Lid Warping: To prevent warping, always place the lid on the top rack of the dishwasher. Avoid exposing the lid to direct high heat, such as conventional ovens or stovetops.
  • Stains or Odors: While resistant, some strong foods can leave residual stains or odors. Try soaking the lid in a solution of warm water and baking soda, or a mild bleach solution (rinse thoroughly afterward).

7. Specifications

SpecificationDetail
Model Number7402-PC
MaterialBPA-free Plastic
ColorBlue
Product Dimensions7"L x 7"W (approximate)
Item Weight0.01 Ounces (per lid, approximate)
ShapeRound
Number of Pieces2 (in this pack)
Dishwasher SafeYes (Top Rack Only)
MicrowaveableYes (Vent lid when microwaving)
Freezer SafeYes
Refrigerator SafeYes

8. Warranty and Support

For warranty information or product support, please refer to the official Pyrex website or contact Pyrex customer service directly. Keep your purchase receipt for any warranty claims.

Pyrex Official Website: www.pyrex.com

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.