1. Introduction
This manual provides essential instructions for the safe assembly, operation, maintenance, and care of your Graco Solano 4-in-1 Convertible Crib with Drawer and Changer. Please read all instructions carefully before assembly and use, and retain this manual for future reference.
The Graco Solano crib is designed to adapt to your child's growth, converting from a crib to a toddler bed, daybed, and full-size bed. It also includes an attached changing table with storage and a drawer for convenience.
Image 1.1: The Graco Solano 4-in-1 Convertible Crib with an attached changing table and storage drawer, presented in a grey finish.
2. Safety Information
Your child's safety is paramount. Always follow these safety guidelines:
- Read all instructions: Assemble the crib exactly as instructed.
- Check for damage: Do not use the crib if any parts are missing, damaged, or broken. Contact customer service for replacement parts.
- Mattress safety: Use only a mattress that is at least 27 1/4 inches (69 cm) by 51 5/8 inches (131 cm) with a thickness not exceeding 6 inches (15 cm). The mattress must fit snugly without gaps.
- Adjust mattress height: Always use the lowest mattress position once your child can pull themselves to a standing position.
- Avoid hazards: Do not place the crib near windows where cords from blinds or drapes could strangle a child. Do not hang toys or objects with strings over the crib.
- Changing table safety: Never leave a child unattended on the changing table. Always use the safety strap provided.
- JPMA Certified: This product is JPMA (Juvenile Products Manufacturers Association) certified, meeting stringent safety standards.
Image 2.1: The Graco Solano Crib highlighting its JPMA certification and the inclusion of a water-resistant changing pad.
3. Assembly Instructions
Assembly of the Graco Solano 4-in-1 Convertible Crib requires two adults. Please ensure all parts and hardware are present before beginning. The assembly instructions and hardware are typically found in an envelope attached to the mattress platform.
3.1 Unpacking and Part Identification
- Carefully remove all components from the packaging.
- Identify all parts against the parts list provided in your specific assembly guide.
- Ensure all hardware (screws, bolts, barrel nuts, etc.) is accounted for.
3.2 General Assembly Steps
- Attach the side rails to the headboard and footboard using the provided hardware. Do not overtighten.
- Assemble the changing table frame and attach it securely to the crib structure.
- Install the changing table shelves and the drawer slides.
- Insert the mattress support platform into the desired height setting.
- Assemble the drawer and slide it into place.
- Place the water-resistant changing pad on the changing table.
- Once fully assembled, tighten all fasteners. Do not overtighten.
Note: Refer to the detailed, step-by-step assembly instructions included with your product for specific diagrams and hardware usage.
4. Operating the Crib and Conversions
The Graco Solano crib offers versatile functionality to grow with your child.
4.1 Adjusting Mattress Height
The crib features 3 adjustable mattress height positions. To adjust, remove the mattress and carefully lower or raise the mattress support platform to the desired level. Ensure all support hooks or fasteners are securely engaged in the new position.
- Highest position: For infants who cannot push up on their hands and knees.
- Middle position: For infants who can push up on their hands and knees.
- Lowest position: For children who can pull themselves to a standing position.
4.2 4-in-1 Conversion Overview
Image 4.1: A visual representation of the Graco Solano Crib's four conversion stages: Crib, Toddler Bed, Daybed, and Full-Size Bed.
4.2.1 Crib Mode
The initial configuration for infants. Ensure the mattress is at an appropriate height for your child's developmental stage.
4.2.2 Toddler Bed Conversion
To convert to a toddler bed, remove the front rail of the crib and replace it with a toddler guard rail (sold separately). Ensure the mattress is in the lowest position.
Image 4.2: The Graco Solano Crib configured as a toddler bed, featuring a lower front rail for easy access while maintaining safety.
4.2.3 Daybed Conversion
To convert to a daybed, remove the front rail of the crib entirely. The mattress should remain in the lowest position. No additional parts are typically required for this conversion.
Image 4.3: The Graco Solano Crib transformed into a daybed, providing an open front for seating or lounging.
4.2.4 Full-Size Bed Conversion
To convert to a full-size bed, both the front and back rails of the crib are removed. You will need a full-size bed conversion kit (sold separately) which includes side rails and slats to support a full-size mattress. The changing table unit is typically detached and can be used as a standalone storage unit.
Image 4.4: The Graco Solano Crib converted into a full-size bed, utilizing the original headboard and footboard.
4.3 Using the Changing Table and Drawer
The attached changing table provides a convenient surface for diaper changes. Always use the included water-resistant changing pad and secure your child with the safety strap. The two open shelves and the pull-out drawer offer storage for essentials.
Image 4.5: A detailed view of the changing table component, showing the water-resistant changing pad and the integrated safety strap.
5. Maintenance and Care
Proper maintenance ensures the longevity and safety of your Graco Solano crib.
- Cleaning: Wipe surfaces with a damp cloth. Avoid abrasive cleaners or strong chemicals that could damage the finish.
- Hardware check: Periodically check all screws, bolts, and fasteners to ensure they are tight. Do not overtighten.
- Storage: If storing the crib, disassemble it according to the instructions and store all parts and hardware in a dry, safe place.
- Changing Pad: The included changing pad is water-resistant and can be wiped clean with a damp cloth and mild soap.
6. Troubleshooting
If you encounter any issues with your Graco Solano crib, consider the following:
- Loose parts: If the crib feels wobbly, check all fasteners and tighten them securely.
- Missing hardware: If you believe parts are missing, refer to your assembly instructions and contact customer service for replacements.
- Difficulty converting: Ensure you are following the specific conversion instructions for your model. Sometimes, components need to be aligned precisely.
- Scratches/Scuffs: Minor cosmetic imperfections can sometimes occur during shipping or assembly. These typically do not affect the structural integrity or safety of the product.
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | 04587-60G |
| Product Dimensions (L x W x H) | 183.13 x 74.93 x 105.92 cm (72.1 x 29.5 x 41.7 inches) |
| Item Weight | 33.4 kg (73.63 lbs) |
| Maximum Weight Recommendation | 50 Pounds |
| Material Type | Wood (Pine) |
| Color | Grey |
| Special Features | Convertible, Drawer, Safety Strap |
| Included Components | Assembly Instruction, Graco Solano 4-in-1 Convertible Crib and Changer with Drawer - Gray, Hardware |
| Required Assembly | Yes |
Image 7.1: A diagram illustrating the key dimensions of the Graco Solano Crib.
8. Warranty and Support
For warranty information, replacement parts, or customer support, please refer to the warranty card included with your product or visit the official Graco website. Ensure you have your model number (04587-60G) and date of purchase available when contacting support.
