Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your LEDVANCE Endura Flood 30W 840 DG LED Floodlight. Please read these instructions carefully before use and retain them for future reference.
The LEDVANCE Endura Flood 30W is an energy-efficient outdoor lighting solution designed for general purpose illumination. It features a compact design, homogeneous light distribution, and a robust die-cast aluminum housing with a tempered glass cover, ensuring durability and performance in outdoor environments.
Safety Information
- Always disconnect power before installation, maintenance, or cleaning.
- Installation must be performed by a qualified electrician in accordance with local wiring regulations.
- Ensure the mounting surface is capable of supporting the weight of the floodlight.
- Do not look directly into the LED light source when it is illuminated.
- This product is designed for outdoor use with an IP65 protection rating, meaning it is dust-tight and protected against water jets.
- The floodlight operates on 230 Volts. Verify your power supply matches this requirement.
Package Contents
Verify that all components are present before beginning installation:
- 1 x LEDVANCE Endura Flood 30W 840 DG LED Floodlight
- Mounting bracket (pre-attached)
- Instruction Manual (this document)
Setup and Installation
The LEDVANCE Endura Flood 30W is designed for surface mount, wall mount installation. No assembly is required for the floodlight unit itself.
This image displays the LEDVANCE Endura Flood 30W floodlight from the front, showcasing its dark grey die-cast aluminum housing and the integrated LED light panel behind a tempered glass cover.
1. Mounting Location Selection
- Choose a suitable outdoor location for wall mounting, ensuring adequate clearance and light coverage.
- Consider the floodlight's dimensions for proper placement.
This technical diagram illustrates the physical dimensions of the LEDVANCE Endura Flood 30W floodlight, showing a length of 170mm, height of 193mm, and depth of 39mm, crucial for installation planning.
2. Secure Mounting
- Use the pre-attached mounting bracket to mark drilling points on the wall.
- Drill appropriate holes and insert wall plugs if necessary.
- Securely fasten the floodlight to the wall using suitable screws (not included).
- Adjust the angle of the floodlight as needed using the bracket's pivot points.
3. Electrical Wiring
Wiring is required. The floodlight comes with a 1-meter connection cable.
- Ensure the main power supply is turned OFF at the circuit breaker before proceeding.
- Connect the floodlight's cable to your main power supply wiring. Follow standard electrical codes for live, neutral, and ground connections.
- Ensure all connections are secure and properly insulated to maintain the IP65 rating.
- Once wiring is complete, restore power to the circuit.
Operating Instructions
The LEDVANCE Endura Flood 30W floodlight is designed for straightforward operation.
- Once properly installed and wired, the floodlight will illuminate when power is supplied to its circuit.
- Operation is typically controlled via an external wall switch (rocker or push button type) connected to the circuit.
- While the product specifications mention 'Remote' and 'Infrared' connectivity, a remote control is not included with this unit. If you wish to use remote functionality, ensure you have a compatible infrared remote system installed separately.
This image shows the LEDVANCE Endura Flood 30W floodlight mounted above a garage door, effectively illuminating the driveway and surrounding area, demonstrating its outdoor application.
Maintenance
The LEDVANCE Endura Flood 30W requires minimal maintenance.
- Cleaning: Periodically clean the exterior of the floodlight with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure power is disconnected before cleaning.
- Light Source: This product is a containing product, meaning it is a luminaire that can be disassembled for a separate check of the light source(s) it contains. However, the LED light source is integrated and non-removable by the user for replacement. Do not attempt to replace the LED module yourself.
- Inspection: Regularly inspect the cable and housing for any signs of damage. If damage is found, disconnect power immediately and consult a qualified electrician.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Floodlight does not illuminate. | No power supply. Incorrect wiring. Faulty switch. | Check circuit breaker. Verify wiring connections (consult electrician). Test or replace switch. |
| Light output is dim or flickers. | Unstable power supply. Loose wiring connection. | Consult electrician to check power supply. Check and secure wiring connections (power off first). |
| Water ingress or condensation inside. | Improper sealing during installation. Damage to housing/glass. | Ensure all seals are intact and connections are watertight. Inspect for cracks; replace unit if damaged. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LEDVANCE |
| Model Number | 4058075206700 |
| Wattage | 30 Watts |
| Brightness | 2700 Lumen |
| Light Color | Cold White |
| Voltage | 230 Volts |
| Material | Die-cast Aluminum Housing, Tempered Glass Cover |
| Product Dimensions (L x W x H) | 7.6" x 6.69" x 1.54" (170mm x 193mm x 39mm) |
| Item Weight | 349 Grams (12.3 ounces) |
| Indoor/Outdoor Usage | Outdoor |
| Protection Class | IP65 (Dust-tight, protected against water jets) |
| Installation Type | Surface Mount, Wall Mount |
| Power Source | Corded Electric, 1m Cable Length |
| Special Feature | Energy Efficient |
| Light Source Type | Integrated LED (Non-removable) |
Warranty and Support
For specific warranty information regarding your LEDVANCE Endura Flood 30W LED Floodlight, please refer to the documentation provided at the point of purchase or contact LEDVANCE customer support directly. Warranty terms typically cover manufacturing defects for a specified period.
For technical support or inquiries, please visit the official LEDVANCE website or contact their customer service department. Contact details can usually be found on the product packaging or the manufacturer's website.
