Liquid Rubber Driveway Restore Sealant - Instruction Manual

1. Product Overview

The Liquid Rubber Driveway Restore Sealant is a single-component, protective membrane designed to revitalize and protect aging asphalt driveways. This ultra-low VOC coating forms a hard yet flexible barrier, offering superior strength and waterproof properties. It is an ideal solution for various asphalt projects, designed to withstand strong UV rays and deterioration.

Image: A 5-gallon bucket of Liquid Rubber Driveway Restore Sealant, illustrating the product packaging.

Key Features:

• Restores Driveways: Revitalizes weathered asphalt, providing a refreshed finish.
• Flexible and Durable: Forms a waterproof, heavy-duty coating designed to withstand weathering.
• Environmentally Friendly: Water-based, non-toxic, with no solvents and low VOCs.
• Easy Application: Can be applied with a brush, roller, or foam squeegee.
• UV Resistant: Designed to withstand strong UV rays.

Image: Illustrates the benefits of the premium coating, highlighting UV resistance, extended longevity, increased flexibility, and over 20 years of trusted performance.

2. Specifications

Brand:

Liquid Rubber

Model Number:

29002CA

Material:

Rubber

Item Form:

Liquid

Color:

Black

Surface Recommendation:

Asphalt

Water Resistance Level:

Waterproof

UPC:

628421290024

Manufacturer:

Liquid Rubber USA

Included Components:

Brush

3. Preparation (Setup)

Proper surface preparation is crucial for optimal adhesion and performance of the Driveway Restore Sealant. Ensure the asphalt surface is clean and free from loose debris before application.

1. Clean Surface: Thoroughly clean the asphalt surface. Remove all loose material, dirt, dust, oil, and other contaminants. A pressure washer can be used, ensuring the surface is completely dry before proceeding.
2. Fill Cracks and Potholes: Address any existing cracks or potholes in the asphalt. Use an appropriate asphalt crack filler or repair product to ensure a smooth and even surface for sealant application. Allow these repairs to cure fully as per their instructions.

Image: Visual guide showing the first two steps of preparation: 1. Clean asphalt and remove loose material, and 2. Fill cracks & potholes.

4. Application (Operating)

The Liquid Rubber Driveway Restore Sealant is designed for easy application. Follow these steps for best results:

1. Application Method: The sealant can be applied using a conventional brush, roller equipment, or a foam squeegee. For larger areas, it can be poured directly onto the surface and then rolled out.
2. Temperature and Sunlight: Apply the product when the ambient temperature is above 50 degrees Fahrenheit (10 degrees Celsius). Avoid application in hot, direct sunlight, as this can cause the product to flash dry too quickly, making it difficult to spread evenly. Overcast conditions or cooler parts of the day are ideal.
3. Apply Heavy Coats: Apply a minimum of 1-2 heavy coats per day. The goal is to build up a protective waterproofing membrane.
4. Drying Time Between Coats: Apply subsequent coats as soon as possible, ensuring the previous coat is dry to the touch with no uncured material underneath. Avoid extended time between coats if possible to ensure proper bonding.
5. Coverage: A minimum final thickness of 1 gallon per 50 square feet is recommended. For a 5-gallon container, coverage should be at least 250 square feet. It typically requires 2-3 coats to achieve the desired protective waterproofing membrane.
6. Tape Removal: If using painter's tape for edges, remove it while the sealant is still wet to prevent peeling or jagged lines.

Image: A diagram illustrating the coverage of Liquid Rubber Driveway Restore Sealant: 5 gallons cover approximately 250 sq ft (single car driveway), and two 5-gallon buckets cover approximately 500 sq ft (double car driveway).

Image: A visual comparison showing a driveway before and after the application of Liquid Rubber Driveway Restore Sealant, demonstrating the revitalized finish.

Image: Examples of suitable application areas including asphalt driveways, asphalt pathways, parking lots, and roadways.

5. Maintenance

Once cured, the Liquid Rubber Driveway Restore Sealant provides a durable and flexible protective layer. This coating is designed to withstand weathering and deterioration, contributing to the longevity of your asphalt surface. No specific ongoing maintenance beyond general cleaning is typically required for the sealant itself.

The product is designed to last longer and remain flexible, reducing the frequency of reapplication compared to traditional asphalt coatings. Inspect your driveway periodically for any signs of wear or damage to the sealant, especially after harsh weather conditions. Reapplication may be considered if significant wear is observed over time.

6. Troubleshooting

Common Issues and Solutions:

• Sealant Drying Too Quickly (Flash Drying):

  If the sealant dries too fast, becoming hard to spread, it is likely due to application in direct sunlight or very hot conditions. To prevent this, apply the product during cooler parts of the day, such as early morning or late afternoon, or on overcast days. Ensure the surface is not excessively hot before application.
• Uneven Application/Coverage:

  Ensure the surface is properly prepared and smooth before application. Apply heavy, even coats. For larger areas, pouring the sealant directly and then rolling it out can help achieve more uniform coverage. Do not over-spread the product; aim for the recommended coverage rate per gallon.

• Poor Adhesion:

  Poor adhesion is often caused by inadequate surface preparation. Ensure the asphalt is thoroughly cleaned, dry, and free of all contaminants (dirt, oil, loose material) before applying the sealant.

7. Safety and Environmental Information

Liquid Rubber Driveway Restore Sealant is a water-based product that is non-toxic and contains no solvents, resulting in ultra-low VOC (Volatile Organic Compounds) emissions. This makes it a more environmentally conscious choice for driveway restoration projects.

Always wear appropriate personal protective equipment, such as gloves and eye protection, during application. Ensure adequate ventilation if working in enclosed or semi-enclosed areas. Keep out of reach of children and pets. Refer to the product label for specific safety instructions and first aid measures.

8. Warranty

No specific warranty information is provided with this product. For details regarding potential warranties or guarantees, please refer to the product packaging or contact the manufacturer directly.

9. Support

For product support, technical assistance, or any inquiries not covered in this manual, please contact Liquid Rubber customer service through their official website or the contact information provided on the product packaging.