Introduction
This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your Hemudu HT05B-201 Single LCD Computer Monitor Free-Standing Desk Stand Riser. Please read this manual thoroughly before installation and use to ensure proper function and safety.
The Hemudu HT05B-201 is designed to elevate your monitor for an ergonomic viewing experience, promoting better posture. It features adjustable height, tilt, swivel, and rotation capabilities, and is compatible with a range of monitor sizes and VESA patterns.
Image: The Hemudu HT05B-201 monitor stand, shown with and without a monitor, demonstrating its design and VESA mounting plate.
Safety Information
Adherence to the following safety guidelines is crucial for safe operation and to prevent damage to the product or injury.
- Weight Capacity: Do not exceed the maximum weight capacity of 77 lbs (35 kg). Overloading can cause instability and damage.
- Monitor Size: This stand is designed for monitors between 13 inches and 32 inches. Ensure your monitor falls within this range.
- VESA Compatibility: Verify your monitor's VESA mounting pattern is 50x50mm, 75x75mm, or 100x100mm before installation.
- Stable Surface: Always place the monitor stand on a stable, level, and sturdy desk or surface to prevent tipping.
- Assembly: Follow all assembly instructions carefully. Incorrect assembly can lead to product failure.
- Children and Pets: Keep small parts away from children and pets, as they may pose a choking hazard.
- Tempered Glass Base: The base is made of tempered glass. Handle with care to avoid chipping or breaking.
Package Contents
Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Tempered Glass Base
- Support Column
- VESA Mounting Plate
- Cable Management Clips
- Rubber Gaskets (for base)
- All necessary screws, washers, and spacers for assembly and monitor attachment
- Assembly Tools (e.g., Allen wrench)
Image: Detailed view of the stand's components, including the VESA plate, support column, base, and features like cable management and rubber gaskets.
Setup Instructions
Follow these steps for quick and easy assembly of your monitor stand:
- Attach Rubber Gaskets to Base: Carefully place the rubber gaskets on the underside corners of the tempered glass base to prevent scratching and provide stability.
- Secure Support Column to Base: Align the support column with the designated holes on the tempered glass base. Use the provided screws to firmly attach the column to the base. Ensure it is tightened securely.
- Attach VESA Mounting Plate to Support Column: Slide the VESA mounting plate onto the support column. The plate can be adjusted to one of the four height levels. Secure it in place using the safety lock mechanism or knob.
- Attach Monitor to VESA Mounting Plate: Carefully align your monitor's VESA holes with the holes on the mounting plate. Use the appropriate screws (provided) for your monitor's VESA pattern (50x50mm, 75x75mm, or 100x100mm). Tighten the screws firmly but do not overtighten.
- Cable Management: Utilize the integrated cable management clips on the support column to route and organize your monitor cables, keeping your workspace tidy.
Image: Visual guide for assembling the monitor stand, highlighting the VESA plate, safety lock, cable management, and rubber gaskets.
Operating Instructions
The Hemudu HT05B-201 monitor stand offers multiple adjustment options to customize your viewing experience:
- Height Adjustment: The stand features 4 distinct height levels along the central column. To adjust, loosen the safety lock/knob on the VESA mounting plate, slide the monitor to the desired height, and re-tighten the lock/knob securely.
- Tilt Adjustment: The monitor can be tilted from -15° to +10°. Use the tool-free knob on the VESA plate to loosen, adjust the tilt angle, and then re-tighten to secure.
- Swivel Adjustment: The stand allows for a swivel range of -50° to +50°. Gently rotate the monitor to the left or right to achieve your preferred viewing angle.
- Rotation: The monitor can be rotated 360° to switch between landscape and portrait orientations. Simply rotate the monitor on the VESA plate until it clicks into the desired position.
Image: Illustration of the 4-level height adjustment feature, allowing users to set their monitor at an ergonomic viewing height.
Image: Visual representation of the monitor stand's tilt capability, showing the range from -15° to +10° and the tool-free adjustment knob.
Image: Depiction of the monitor stand's swivel function, allowing for a +/- 50° rotation of the monitor.
Image: Demonstrates both the tilt and 360° rotation features, allowing for flexible monitor positioning in landscape or portrait mode.
Maintenance
To ensure the longevity and optimal performance of your Hemudu monitor stand, follow these simple maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe down the stand. For stubborn marks, a slightly damp cloth with mild soap can be used, followed by drying. Avoid abrasive cleaners or solvents that could damage the finish or glass.
- Regular Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
- Glass Base Care: Handle the tempered glass base with care. Avoid dropping heavy objects on it or subjecting it to sharp impacts.
Troubleshooting
If you encounter any issues with your monitor stand, refer to the table below for common problems and their solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Monitor wobbles on stand. | Loose connections; uneven surface; monitor too heavy. | Ensure all screws are tightened. Place stand on a flat, stable surface. Verify monitor weight is within 77 lbs capacity. |
| Monitor does not fit the VESA plate. | Incorrect VESA pattern; monitor too large. | Confirm monitor VESA pattern is 50x50mm, 75x75mm, or 100x100mm. Ensure monitor size is between 13-32 inches. |
| Difficulty adjusting height/tilt/swivel. | Adjustment knob/lock is too tight; mechanism is stiff. | Loosen the respective knob/lock before attempting adjustment. Apply gentle, even pressure. Do not force adjustments. |
| Monitor cannot rotate to portrait mode (for larger monitors). | Monitor height (H) exceeds stand's vertical clearance in portrait mode. | For 100x100mm VESA, monitor height (H) must be < 11.7". For 75x75mm, H < 12.2". For 50x50mm, H < 12.7". Adjust monitor height on the stand or consider landscape orientation. |
Image: Important note regarding VESA pattern compatibility and maximum monitor height for successful portrait mode rotation.
Specifications
| Feature | Detail |
|---|---|
| Model Number | HT05B-201 |
| Brand | Hemudu |
| Compatibility (Screen Size) | 13 inch to 32 inch LCD LED Plasma flat screens TV |
| VESA Compatibility | 50x50mm, 75x75mm, 100x100mm |
| Maximum Weight Capacity | 77 lbs (35 kg) |
| Tilt Adjustment | -15° to +10° |
| Swivel Adjustment | -50° to +50° |
| Rotation | 360° (Landscape to Portrait) |
| Height Adjustment | 4 levels (along center tube) |
| Material | Tempered Glass (Base), Metal (Column, VESA Plate) |
| Product Dimensions (L x W x H) | 11.8 x 7.9 x 16 inches (approximate, assembled) |
| Item Weight | 9.77 pounds |
| UPC | 658437067839 |
Warranty and Support
Hemudu products are manufactured with quality and customer satisfaction in mind. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Hemudu website. If you require technical assistance, have questions about assembly, or need to report a missing/damaged part, please contact Hemudu customer support through their official channels.
For further information, you may visit the Hemudu Store on Amazon.