Important Safety Instructions
Please read and save these important safety instructions before using this fan. Failure to follow these instructions may result in electric shock, fire, or injury.
- Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
- Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
- Always unplug the fan before moving, cleaning, or when not in use.
- Do not immerse fan in water or other liquids.
- Do not use the fan in wet or damp locations such as bathrooms or laundry areas.
- This fan is intended for household use only.
- Do not allow children to operate the fan without supervision.
- Use only the supplied AC adapter for AC power operation.
- Ensure batteries are inserted correctly according to polarity markings.
Product Overview
The O2COOL Treva 10-Inch Portable Desktop Air Circulation Battery Fan (Model FD10002A) is designed to provide personal cooling and air circulation. It features a durable plastic construction, a 10-inch blade, and dual power source options for versatile use.
Figure 1: Front view of the O2COOL Treva 10-Inch Portable Fan.
Figure 2: Side view highlighting the durable design and approximate dimensions (3.8"D x 12"W x 12.9"H).
Setup
Powering the Fan
Your Treva 10-Inch Portable Fan can be powered by either D-cell batteries or the included AC adapter.
Battery Installation (6-D cell batteries, not included)
- Position the fan face down on a flat, stable surface.
- Locate the battery compartment door on the back of the fan.
- Slide out the battery door to open the compartment.
- Insert six (6) D-cell batteries, ensuring correct polarity (+/-) as marked inside the compartment.
- Replace the battery door by sliding it back into place until it clicks securely.
Figure 3: The fan can be powered by batteries or an AC adapter.
AC Adapter Connection
- Locate the AC adapter port on the side of the fan.
- Insert the plug of the supplied AC adapter into the fan's port.
- Plug the other end of the AC adapter into a standard 120-240 VAC, 50-60 Hz wall outlet.
- Note: Inserting the AC adapter plug will automatically disconnect any installed batteries from the circuit, allowing the fan to run on AC power.
Video 1: This video demonstrates the setup and dual power source functionality of the Treva 10-Inch Portable Fan, showing how to insert batteries and connect the AC adapter.
Operating Instructions
The fan features a simple two-speed operation for customized airflow.
- Ensure the fan is powered either by correctly installed batteries or by the AC adapter plugged into an outlet.
- Locate the slide switch on the side of the fan.
- Slide the switch to the 'LOW' position for a gentle breeze.
- Slide the switch to the 'HIGH' position for maximum air circulation.
- To turn off the fan, slide the switch to the 'OFF' (middle) position.
Figure 4: The fan offers two speed settings for optimal comfort.
The fan's compact design and built-in handle allow for easy portability, making it suitable for various environments such as home, office, or outdoor settings.
Figure 5: The fan's design emphasizes portability and lightweight construction.
Maintenance
Regular cleaning will help maintain the fan's performance and extend its lifespan.
- Always ensure the fan is turned off and unplugged from the power source (AC adapter or batteries removed) before cleaning.
- Use a soft, damp cloth to wipe the exterior surfaces of the fan. Do not use abrasive cleaners or solvents.
- To clean the fan blades, use a soft brush or a vacuum cleaner with a brush attachment to gently remove dust and debris from the grilles.
- Do not allow water or other liquids to enter the motor housing.
- Store the fan in a cool, dry place when not in use for extended periods.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply; batteries are dead or incorrectly installed; AC adapter not properly connected. |
|
| Weak airflow. | Fan is on low speed; grilles are obstructed by dust. |
|
| Unusual noise during operation. | Obstruction in the fan blades; fan not on a stable surface. |
|
Specifications
| Brand | O2COOL |
| Model Name | Fin Fan |
| Model Number | FD10002A |
| Electric Fan Design | Table Fan |
| Power Source | Battery Powered (6-D cell, not included) or AC Adapter |
| Product Dimensions (D x W x H) | 3.8"D x 12"W x 12.9"H |
| Item Weight | 2.9 Pounds |
| Number of Speeds | 2 |
| Material | Plastic |
| Wattage | 12 watts |
| Included Components | Fan, AC Adapter (2 Fans included in 2-pack) |
Warranty and Support
For warranty information or product support, please contact O2COOL customer service. Keep your purchase receipt as proof of purchase for any warranty claims.
- Manufacturer: O2COOL
- Website: www.o2cool.com (Please check the official website for the most current contact information and warranty details.)