Accessory USA 12V AC/DC Adapter

Download PDF
Contents

Accessory USA 12V AC/DC Adapter Instruction Manual

For Stanley FatMax Model #: TPL45s TPL45 S Ultimate Portable Tripod Light

1. Introduction

This manual provides essential instructions for the safe and effective use of your Accessory USA 12V AC/DC Adapter. This adapter is designed as a replacement power supply for devices requiring a 12V DC input, specifically compatible with the Stanley FatMax Model #: TPL45s TPL45 S Ultimate Portable Tripod Light.

Please read this manual thoroughly before using the product and retain it for future reference.

Accessory USA 12V AC/DC Adapter

Image showing the Accessory USA 12V AC/DC Adapter, typically black with a barrel connector, ready for use.

2. Safety Information

To ensure safe operation and prevent damage, observe the following safety precautions:

  • Ensure the adapter's voltage and current specifications match your device's requirements. This adapter provides 12V DC output.
  • Do not expose the adapter to water, moisture, or extreme temperatures.
  • Avoid dropping or subjecting the adapter to strong impacts.
  • Do not attempt to open or modify the adapter. There are no user-serviceable parts inside.
  • Always unplug the adapter from the power outlet when not in use or during electrical storms.
  • Keep out of reach of children.
  • This product is CE / FCC / RoHS certified, indicating compliance with safety and environmental standards. It features OVP (Over Voltage output Protection), OCP (Over Current output Protection), and SCP (Short Circuit output Protection) for enhanced safety.

3. Setup

Follow these steps to set up your AC/DC adapter:

  1. Verify Compatibility: Confirm that your device, such as the Stanley FatMax TPL45s TPL45 S Ultimate Portable Tripod Light, requires a 12V DC power input and has a compatible barrel connector.
  2. Connect to Device: Insert the barrel connector of the adapter firmly into the power input port of your device.
  3. Connect to Power Outlet: Plug the adapter's main power connector (2-pin) into a standard wall power outlet.
  4. Power On Device: Once connected, you may power on your device according to its own operating instructions.

4. Operating Instructions

The Accessory USA 12V AC/DC Adapter operates automatically once connected to a power source and a compatible device. It converts AC wall power to the required 12V DC for your device.

  • Ensure all connections are secure before operating your device.
  • The adapter is designed for continuous use within its specified limits.
  • If your device has an on/off switch, use that to control power to the device, not by repeatedly plugging and unplugging the adapter from the wall.

5. Maintenance

Proper maintenance ensures the longevity and performance of your adapter:

  • Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • Storage: Store the adapter in a cool, dry place away from direct sunlight and moisture when not in use. Avoid wrapping the cable too tightly around the adapter.
  • Inspection: Periodically inspect the adapter and its cable for any signs of damage, such as frayed wires, cracks, or bent pins. If damage is found, discontinue use and replace the adapter.

6. Troubleshooting

If you encounter issues with your adapter, refer to the following common troubleshooting steps:

  • Device Not Powering On:
    • Ensure the adapter is securely plugged into both the wall outlet and your device.
    • Check if the wall outlet is functional by plugging in another device.
    • Verify that your device's power switch is in the 'On' position.
    • Confirm that the adapter's specifications (12V DC) match your device's power requirements.
  • Adapter Feels Hot:
    • It is normal for adapters to feel warm during operation. However, if it becomes excessively hot to the touch or emits a burning smell, immediately unplug it from the wall and discontinue use.
    • Ensure the adapter is not covered or placed in an area with poor ventilation.
  • Intermittent Power:
    • Check for loose connections at both the wall outlet and the device.
    • Inspect the cable for any visible damage or kinks.

7. Specifications

BrandAccessory USA
Connector TypeBarrel Connector
Compatible DevicesAdapter (Replacement for Stanley FatMax Model #: TPL45s TPL45 S Ultimate Portable Tripod Light)
Input Voltage12 Volts (AC input range not specified, typically 100-240V AC)
Output Voltage12 Volts DC
Power SourceCorded Electric
Main Power Connector Type2 Pin
Specification MetCE, RoHS
Mounting TypeWall Mount
ASINB07TSYXZ6N
GTIN/UPC607182561291

8. Warranty and Support

Accessory USA provides the following warranty and support for this product:

  • 30 Days Money Back Guarantee: If you are not satisfied with your purchase, you may return it within 30 days for a full refund.
  • 60 Days Free Exchange: Enjoy a free exchange within 60 days with a paid return label if the product is defective or unsuitable.
  • 365 Days Anytime Worry-Free Warranty: This product is covered by a 365-day warranty against manufacturing defects.

For warranty claims or technical support, please contact Accessory USA through your purchase platform or their official website.

© 2024 Accessory USA. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.