ANLAN Ultrasonic Facial Skin Scrubber

Introduction

Thank you for choosing the ANLAN Ultrasonic Facial Skin Scrubber. This device is designed to provide effective and gentle facial cleansing, exfoliation, nutrient absorption, and skin lifting through advanced ultrasonic vibration and EMS technology. Please read this manual thoroughly before first use to ensure proper operation and maximize the benefits for your skin.

The ANLAN Skin Scrubber features four main functions: Ultrasonic Cleaning, Ion+ (deep cleansing), Ion- (nutrient absorption), and EMS (skin lifting). It is suitable for all skin types.

Image: The ANLAN Ultrasonic Facial Skin Scrubber, showing the device itself and its product packaging. The device is white with a metallic spatula tip and control buttons.

Safety Precautions

• Do not use if pregnant or if you have skin conditions that contraindicate the use of electronic beauty devices.
• Always keep your face moist during ultrasonic use to prevent skin irritation.
• The EMS function produces a weak current stimulus; this is normal and not a malfunction. If sensitive to this sensation, avoid touching the metal strips on the sides of the device.
• Do not immerse the device in water.
• Keep out of reach of children.
• Consult a dermatologist if you have any pre-existing skin conditions or concerns.

Product Components

• ANLAN Ultrasonic Facial Skin Scrubber
• USB Charging Cable
• User Manual
• Storage Pouch (may vary by package)

Image: A visual representation of the ANLAN Skin Scrubber highlighting its four functional modes: Ultrasonic, EMS Lifting, Ion+, and Ion-.

Setup and Charging

Initial Charging

Before first use, fully charge the device. Connect the USB charging cable to the device's charging port and to a compatible USB power source (e.g., computer, wall adapter). The charging indicator light will show the charging status. A full charge typically takes about 1 hour.

Power On/Off

Press and hold the power button for a few seconds to turn the device on or off. Short press the power button to cycle through the different modes once the device is on.

Operating Instructions

The ANLAN Skin Scrubber has four main modes:

1. Ultrasonic Cleaning Mode (ULTRASONIC)

   This mode uses high-frequency ultrasonic vibrations (up to 24000/s) to atomize water and deeply cleanse pores, remove makeup residue, and purify the skin.

   • Preparation: Cleanse your face and remove all makeup. Ensure your skin is thoroughly wet with water or a mild toner.
   • Application: Select the ULTRASONIC mode. Gently glide the spatula tip over your moist skin, moving from the center of your face outwards. Focus on areas with blackheads, clogged pores, or excess oil, such as the T-zone.
   • Duration: Use for 3-5 minutes. For oily and non-sensitive skin, 2-3 times per week. For dry, combination, and sensitive skin, 1-2 times per week.
   

   Image: A diagram explaining the sonic vibration technology, showing how it atomizes, bursts, assaults, and detaches impurities from the skin surface, leading to exfoliation, improved blood circulation, clean pores, and blackhead removal.

2. Ion+ Mode (Deep Cleansing)

   This mode utilizes positive ions to further draw out stubborn blackheads, aging stratum corneum, and deep-seated impurities from pores.

   • Preparation: After initial cleansing, ensure skin is still moist.
   • Application: Select the ION+ mode. Hold the device with the spatula tip facing downwards and gently move it across your face, similar to the Ultrasonic mode.
   • Note: This mode is particularly effective after opening pores with warm water or steam.

3. Ion- Mode (Nutrient Absorption)

   This mode uses negative ions to help skin absorb nutrients from skincare products more effectively.

   • Preparation: Apply your preferred serum, essence, or moisturizer to your face.
   • Application: Select the ION- mode. Hold the device with the spatula tip facing upwards (flat against the skin) and gently glide it over your face, allowing the product to penetrate.
   

   Image: A visual explanation of the Ion+ mode for deep cleansing and the Ion- mode for enhanced moisturizing and nutrient absorption.

4. EMS Pulse Lifting Mode (EMS)

   The EMS micro-current stimulates facial muscles, promotes collagen regeneration, and helps to lift and firm the skin, reducing the appearance of fine lines and wrinkles.

   • Preparation: Ensure your skin is clean and moist, or apply a conductive gel/serum.
   • Application: Select the EMS mode. Hold the device with the spatula tip flat against your skin and gently move it upwards and outwards, following the contours of your face. Ensure your fingers are touching the metal strips on the sides of the device for the EMS current to flow.
   • Areas: Can be used on the forehead, cheeks, jawline, and neck.
   

   Image: A detailed diagram illustrating how EMS micro-current stimulates facial muscles to restore elasticity, promote ATP production, and lift and tighten the face.

General Usage Tips:

• Always keep your face moist during use, especially for Ultrasonic and Ion+ modes.
• Do not press the device too hard against your skin.
• Move the device slowly and steadily across your skin.
• After each use, rinse your face with water and apply your regular skincare products.

Maintenance and Care

• Cleaning: After each use, wipe the spatula tip and the device body with a soft, damp cloth. Do not use abrasive cleaners or immerse the device in water.
• Storage: Store the device in a cool, dry place, away from direct sunlight and high temperatures. Use the provided storage pouch to protect it from dust and damage.
• Battery: To prolong battery life, avoid completely draining the battery frequently. Charge the device when the battery indicator is low.

Troubleshooting

Specifications

Warranty and Support

ANLAN offers a 12-month after-sales service for this product. If you have any questions, concerns, or require support, please contact ANLAN Direct MX, the seller, through your purchase platform.

For further assistance, please refer to the contact information provided with your purchase or visit the official ANLAN support channels.