Introduction
This manual provides essential information for the installation, operation, and maintenance of your xUmp CR2032 CMOS Battery with MOLEX 51021-0200-B 1.25mm Pitch connector. This battery is designed for use in computer and laptop motherboards, as well as other compatible electronic devices requiring a 3V CR2032 lithium cell with a pre-attached connector.
Please read these instructions carefully before proceeding with installation to ensure proper function and safety.
Product Features
- Direct Replacement: Specifically designed as a replacement for many computer and laptop motherboards requiring a CR2032 CMOS battery.
- Standard Connector: Equipped with a standard MOLEX 51021-0200-B 1.25mm Pitch connector for easy integration.
- Extended Lifespan: Offers a 3V 210mAh capacity, providing 3-5 years of operational life in most computers and laptops, with a shelf life of 10 years.
- Broad Compatibility: Compatible with various PC brands including DELL, HP, IBM, ASUS, and others. Always verify compatibility with your device's manual.
- High-Quality Lithium Cell: A reliable Lithium cell battery, compliant with RoHS and UN38.3 standards.
- Lead Wire Length: Features a lead wire length of 3.5 inches for flexible installation.
Setup and Installation
Installing the xUmp CR2032 CMOS battery requires careful handling and adherence to your device's specific instructions. Always consult your computer or laptop motherboard manual for detailed steps on replacing the CMOS battery.
General Installation Steps:
- Power Off and Disconnect: Ensure your computer or laptop is completely powered off and disconnected from all power sources.
- Access Motherboard: Open your computer case or laptop chassis to gain access to the motherboard. Refer to your device's manual for instructions on how to safely open it.
- Locate Old CMOS Battery: Identify the existing CMOS battery. It is typically a small, coin-shaped battery often connected via a small two-pin connector.
- Disconnect Old Battery: Carefully disconnect the old battery's connector from the motherboard. Note the orientation of the connector and wires (polarity) before removal.
- Connect New Battery: Connect the xUmp CR2032 CMOS battery to the motherboard. Ensure the MOLEX 51021-0200-B connector is inserted correctly and securely. The lead wires are typically red for positive (+) and black for negative (-). Verify polarity with your motherboard's connector if unsure.
- Secure Battery: Position the new battery in a safe location within the chassis, ensuring it does not interfere with other components or cooling.
- Reassemble Device: Carefully reassemble your computer or laptop.
- Power On and Test: Reconnect power and turn on your device. You may need to enter the BIOS/UEFI settings to reset the date and time or other system configurations.

Image 1: xUmp CR2032 CMOS Battery with pre-attached MOLEX 51021-0200-B connector. This image shows the battery and its connector, highlighting the compact design and wire leads.
Operating Instructions
Once correctly installed, the xUmp CR2032 CMOS battery operates automatically to maintain your computer's BIOS/UEFI settings, date, and time when the main power is off. No further user interaction is typically required for its operation.
The battery provides a constant 3V power supply to the CMOS memory, ensuring that critical system information is retained even when the device is unplugged.
Maintenance
- Expected Lifespan: The battery is designed to last 3-5 years in most computer and laptop applications.
- Shelf Life: Unused batteries have a shelf life of up to 10 years when stored in a cool, dry place.
- Replacement: Replace the battery if your computer consistently loses its date/time settings or BIOS configurations after being powered off.
- Storage: Store unused batteries in their original packaging, away from direct sunlight, heat, and moisture. Keep out of reach of children.
Troubleshooting
If you encounter issues after installing the xUmp CR2032 CMOS battery, consider the following:
- Date/Time Not Retained:
- Ensure the battery connector is fully and correctly seated on the motherboard.
- Verify the polarity of the connector (red wire typically positive, black wire negative).
- Confirm the battery itself is functional. While rare for new batteries, a faulty unit could occur.
- Computer Fails to Boot or Displays Error:
- Double-check all connections made during installation.
- Ensure no other components were accidentally dislodged or damaged during the process.
- Reset BIOS/UEFI settings to default if accessible.
- Connector Mismatch:
- This battery features a MOLEX 51021-0200-B 1.25mm Pitch connector. If your motherboard requires a different connector type or pitch, this battery will not be compatible. Always verify your device's requirements before purchase.
If problems persist, consult your device's manufacturer support or a qualified technician.
Specifications
| Brand | xUmp |
| Model Name | CR2032 |
| Battery Cell Composition | Lithium |
| Battery Cell Type | Lithium |
| Voltage | 3 Volts |
| Battery Capacity | 210 Milliamp Hours (mAh) |
| Connector Type | MOLEX 51021-0200-B 1.25mm Pitch |
| Lead Wire Length | 3.5 inches |
| Reusability | Single Use |
| Item Weight | 0.1 Ounces |
| Compliance | RoHS, UN38.3 |
| UPC | 730052002072 |
| ASIN | B07TS54R42 |
Safety Information
- Keep Out of Reach of Children: CR2032 coin cell batteries can be dangerous if swallowed. Seek immediate medical attention if ingestion is suspected.
- Proper Disposal: Dispose of used batteries according to local regulations. Do not incinerate or mutilate batteries.
- Avoid Short Circuits: Do not short-circuit the battery terminals.
- Do Not Recharge: This is a single-use battery and is not rechargeable. Attempting to recharge may lead to leakage or explosion.
- Temperature: Do not expose batteries to excessive heat or direct sunlight.
- Handling: Handle batteries with clean, dry hands. Avoid touching the terminals with bare fingers to prevent corrosion or reduced performance.
Warranty and Support
xUmp products are manufactured to high-quality standards. For specific warranty information or technical support, please refer to the xUmp Science store on Amazon or contact the seller directly through your Amazon order history.
Please note that batteries are generally considered non-returnable goods. Verify compatibility and requirements before purchase.
xUmp Science Store: Visit the xUmp Store