Introduction
Thank you for choosing the Oneach 62-inch Gold Arc Floor Lamp. This modern and elegant floor lamp is designed to provide soft, ambient lighting for various indoor spaces such as living rooms, bedrooms, studies, and offices. Its sturdy metal construction, linen shade, and convenient foot switch make it a functional and stylish addition to your home or business. This manual provides essential information for safe setup, operation, and maintenance of your new lamp.
Important Safety Instructions
- Always unplug the lamp from the power outlet before cleaning, changing the light bulb, or performing any maintenance.
- Do not operate the lamp with a damaged cord or plug. If the cord or plug is damaged, contact qualified service personnel for repair or replacement.
- This lamp is intended for indoor use only. Do not expose it to water or high humidity.
- Ensure the lamp is placed on a stable, flat surface to prevent tipping. The heavy base is designed for stability, but caution should always be exercised, especially around children and pets.
- Use only an E26 base light bulb with a maximum wattage of 100 watts. Exceeding the recommended wattage may cause overheating and damage to the lamp.
- Keep flammable materials away from the light bulb when the lamp is in operation.
What's in the Box
Please check to ensure all components are present and undamaged:
- Lamp Shade (Linen)
- Power Cable with Foot Switch
- Lamp Base (Metal)
- Lamp Pole Sections (Multiple, Metal)
- Lamp Head with E26 Socket
Setup & Assembly
Follow these steps to assemble your Oneach Floor Lamp:
- Carefully unpack all components from the packaging and lay them out on a clean, flat surface.
- Begin by screwing the lamp pole sections together clockwise until they are securely connected. Ensure the power cord runs through the center of the pole sections.
- Attach the assembled lamp pole to the heavy lamp base by screwing it clockwise until tight.
- Screw the lamp head with the E26 socket onto the top of the assembled pole.
- Assemble the fabric lamp shade. If it arrived flat-packed, follow the instructions to attach the fabric to the metal rings, ensuring the seams are aligned.
- Secure the assembled lamp shade to the lamp head using the provided retaining ring.
- Install an E26 base light bulb (not included) into the socket. Ensure the bulb does not exceed 100 watts.
Figure 1: Lamp dimensions and foot switch detail. The lamp stands 62 inches tall with a 10-inch base and includes a 6-foot power cord with an in-line On/Off foot switch.
Video 1: A seller-provided video demonstrating the easy assembly process of the Oneach Modern Tall Arc Floor Lamp.
Operating Instructions
Using your Oneach Floor Lamp is simple and convenient:
- Power On/Off: Plug the lamp into a standard 110V electrical outlet. Use the foot switch located on the power cord to easily turn the lamp ON or OFF with a simple step.
- Adjustable Lamp Head: The lamp head can be adjusted to direct light where it's most needed, offering flexibility for reading, task lighting, or ambient illumination.
- Remote Control (Optional): If you purchased a variant with a remote-controlled smart bulb, refer to the smart bulb's specific instructions for pairing and operating features like dimming and color temperature adjustments.
Figure 2: Demonstrating the convenient foot switch for easy operation.
Figure 3: The lamp head can be adjusted up to 270 degrees horizontally and 90 degrees vertically to direct light.
Video 2: A seller-provided video showcasing the Oneach 62-inch Gold Floor Lamp in a living room setting, highlighting its design and functionality.
Maintenance
To ensure the longevity and optimal performance of your lamp, follow these maintenance guidelines:
- Cleaning: Dust the lamp regularly with a soft, dry cloth. For more thorough cleaning, wipe the metal parts with a slightly damp cloth and dry immediately. Do not use abrasive cleaners, solvents, or polishing agents as they may damage the finish.
- Bulb Replacement: Always unplug the lamp before replacing the bulb. Allow the old bulb to cool completely before touching it. Screw in a new E26 base light bulb, ensuring it does not exceed 100 watts.
- Cord Care: Periodically inspect the power cord for any signs of damage. Avoid placing heavy objects on the cord or running it under carpets where it could be pinched or damaged.
Troubleshooting
If you encounter any issues with your lamp, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Lamp does not turn on | 1. Power cord not plugged in 2. Light bulb is loose or burnt out 3. Foot switch malfunction | 1. Ensure the power cord is securely plugged into a working outlet. 2. Tighten or replace the light bulb. 3. Test the foot switch; if faulty, contact support. |
| Light is flickering | 1. Loose light bulb 2. Incompatible or faulty bulb 3. Unstable power supply | 1. Tighten the light bulb. 2. Replace the bulb with a new, compatible E26 bulb. 3. Try plugging the lamp into a different outlet. |
| Lamp is unstable/wobbly | 1. Pole sections not fully tightened 2. Lamp base not on a flat surface | 1. Ensure all pole sections are screwed together tightly. 2. Place the lamp on a firm, level surface. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Oneach |
| Model Number | AMZ-F2015-GL |
| Product Dimensions | 10"D x 10"W x 62"H |
| Item Weight | 12.92 Pounds |
| Color | Gold |
| Material | Metal |
| Shade Material | Linen |
| Shade Color | White |
| Finish Type | Antique |
| Style | Modern |
| Light Source Type | Electric |
| Bulb Base | E26 |
| Wattage | 100 watts (Max) |
| Voltage | 110 Volts |
| Switch Type | Foot Switch |
| Indoor/Outdoor Usage | Indoor |
| Included Components | Power Cable, Shade |
Warranty & Support
Oneach is committed to delivering quality products. For any questions, concerns, or warranty inquiries regarding your Oneach 62-inch Gold Arc Floor Lamp, please refer to the contact information provided with your purchase or visit the official Oneach website for customer support. Please retain your proof of purchase for warranty claims.
