Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your AmeriLite U-Type LED Tube Black Replacement Projector Headlights. These headlights are designed for 2011-2015 Chevy Cruze models, offering a direct OEM replacement without the need for modifications. Please read this manual thoroughly before proceeding with installation or operation to ensure proper function and safety.
Image: AmeriLite U-Type LED Projector Headlights for 2011-2015 Chevy Cruze.
Safety Information
- Professional Installation Recommended: Due to the complexity of automotive electrical systems and the importance of proper headlight alignment for safe driving, professional installation is highly recommended.
- Disconnect Battery: Always disconnect the vehicle's battery before performing any electrical work to prevent electrical shock or damage to the vehicle's electrical system.
- Wear Protective Gear: Use appropriate personal protective equipment, such as safety glasses and gloves, during installation.
- Handle with Care: Headlight assemblies contain delicate components. Handle them carefully to avoid damage.
- DOT & SAE Standards: These headlights meet or exceed DOT (Department of Transportation) and SAE (Society of Automotive Engineers) standards, ensuring compliance with safety regulations.
Package Contents
Your AmeriLite headlight package includes the following items:
- One (1) Driver Side Headlight Assembly
- One (1) Passenger Side Headlight Assembly
- Two (2) H1 Halogen Bulbs (for High Beam)
- Two (2) H7 Halogen Bulbs (for Low Beam)
Image: Labeled components of the headlight assembly and included bulbs.
Setup and Installation
These AmeriLite headlights are designed for direct OEM replacement. While no modifications are typically needed, professional installation is strongly recommended to ensure correct wiring, alignment, and functionality.
General Installation Steps (Consult a professional for detailed vehicle-specific instructions):
- Preparation: Park the vehicle on a level surface, engage the parking brake, and turn off the engine. Disconnect the negative terminal of the vehicle's battery.
- Access Old Headlights: Depending on your Chevy Cruze model year (2011-2015), you may need to remove the front bumper, grille, or other components to access the existing headlight assemblies.
- Remove Old Headlights: Disconnect all electrical connectors and unbolt the old headlight assemblies from the vehicle frame. Carefully remove them.
- Install New Headlights: Position the new AmeriLite headlight assemblies into place. Ensure all mounting points align correctly.
- Connect Wiring: Connect the high/low beam connector and the running/turn signal connector to the corresponding vehicle harnesses. Ensure connections are secure.
- Secure Headlights: Bolt the new headlight assemblies securely to the vehicle frame.
- Reassemble Vehicle: Reinstall any removed bumper, grille, or other components.
- Reconnect Battery: Reconnect the negative terminal of the vehicle's battery.
- Test Functionality: Turn on the vehicle and test all headlight functions: low beam, high beam, turn signals, and LED U-bar.
- Adjust Beam: Adjust the headlight beam using the beam adjuster screw to ensure proper alignment and prevent blinding oncoming traffic. This is a critical step for safety.
Image: Rear view with connectors and beam adjuster.
Image: Front detail of U-Type LED and turn signal.
Operating Instructions
Your AmeriLite U-Type LED Projector Headlights integrate several lighting functions for optimal visibility and safety.
- Low Beam: Provides standard illumination for general driving conditions. Activated via your vehicle's headlight switch.
- High Beam: Offers increased illumination for driving in dark areas. Activated via your vehicle's high beam switch.
- LED U-Bar (Daytime Running Lights/Parking Lights): The distinctive U-shaped LED tube provides modern styling and enhanced visibility. This typically activates with your vehicle's ignition or parking light setting.
- Turn Signal: Integrated amber LEDs provide clear indication of turns or lane changes. Activated via your vehicle's turn signal stalk.
Image: High intensity U-Type LEDs and turn signals illuminated.
Image: Both headlights illuminated, showcasing all functions.
Maintenance
- Cleaning: Clean the headlight lenses regularly with a soft cloth and mild automotive soap or glass cleaner. Avoid abrasive cleaners or harsh chemicals that can damage the lens material (Polymethylacrylate or Polycarbonate).
- Bulb Replacement: The H1 (high beam) and H7 (low beam) halogen bulbs are replaceable. If a bulb fails, replace it with a new bulb of the same type and wattage (12V, 55W). Refer to your vehicle's service manual or a professional for specific bulb replacement procedures.
- Inspection: Periodically inspect the headlight assemblies for any signs of damage, loose connections, or moisture intrusion. Address any issues promptly.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Headlights not working | Blown fuse, loose electrical connection, faulty bulb. | Check vehicle's fuse box, inspect all electrical connections, replace faulty bulbs. Consult a professional if issues persist. |
| One headlight is dim or out | Faulty bulb, poor connection, wiring issue. | Replace the specific bulb (H1 or H7), check connections for that headlight. |
| Turn signals not flashing | Blown fuse, faulty flasher relay, wiring issue. | Check turn signal fuse, inspect wiring. Professional diagnosis may be required. |
| Moisture inside headlight lens | Condensation (normal in some conditions), improper seal, damage to housing. | Small amounts of condensation usually dissipate. If excessive or persistent, check for proper sealing and housing integrity. Contact support if severe. |
Specifications
| Brand: | AmeriLite |
| Model: | 02-AZ-CZ11-PBC-U |
| Compatible Vehicle: | 2011-2015 Chevy Cruze |
| Light Source Type: | Halogen (H1 High Beam, H7 Low Beam), LED (U-Bar, Turn Signal) |
| Voltage: | 12 volts |
| Wattage: | 55 watts (for halogen bulbs) |
| Lens Material: | Polymethylacrylate or Polycarbonate |
| Special Feature: | DOT/SAE Compliant |
| Auto Part Position: | Front |
| Dimensions (per parcel): | 77.47 x 53.34 x 40.64 cm |
| Weight (per parcel): | 2.72 kg |
| OEM Equivalent Part Numbers: | 95900041, 95900042, 95291963, 95291964, 95918946, 95918947 |
Warranty and Support
For information regarding product warranty, technical support, or replacement parts, please refer to the documentation provided with your purchase or contact AmeriLite customer service directly. Keep your purchase receipt as proof of purchase.
Contact Information: Please visit the official AmeriLite website or refer to your purchase invoice for the most current contact details.