1. Introduction
This manual provides instructions for the proper use and care of your Tosuny HT1250 USB Programming Cable. This cable is designed to facilitate the programming of various Motorola walkie-talkie and radio models, enabling communication between your computer and the radio for configuration purposes. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.
Figure 1: Tosuny HT1250 USB Programming Cable and included software CD.
2. Setup
Follow these steps to set up your Tosuny HT1250 USB Programming Cable:
2.1 Driver Installation
- Locate Drivers: The cable typically comes with a driver CD. If your computer lacks a CD-ROM drive, you will need to obtain the drivers online. A common driver for this type of cable is associated with the chip ID "vid_1a86&pid_7523". Search online for the appropriate driver for your operating system.
- Install Drivers: Run the driver installation program. Follow the on-screen prompts to complete the installation. It is recommended to restart your computer after installation.
- Verify Installation: After connecting the cable to your computer, open Device Manager (Windows) and check under "Ports (COM & LPT)" or "USB Serial Port" to ensure the driver is correctly installed and the cable is recognized. Note the assigned COM port number.
Figure 2: The programming cable is compatible with various Windows operating systems, including Windows 98ME, 2000, 2003, XP, 7 (32/64 bit), 8 (32/64 bit), and Vista.
2.2 Software Installation
Install the appropriate radio programming software (Customer Programming Software - CPS) for your specific radio model. This cable is compatible with various Motorola radio series, including PTX, GP, HT, MTX, PRO, and MTP. Ensure the CPS version is compatible with your radio and operating system.
2.3 Physical Connection
- Connect to Computer: Plug the USB-A end of the programming cable into an available USB port on your computer.
- Connect to Radio: Connect the multi-pin connector end of the cable to the programming port on your walkie-talkie or radio. Ensure a secure connection.
Figure 3: The cable features a standard USB connector on one end and a multi-pin connector for radio interface on the other, designed for convenient and practical operation.
Video 1: This short video demonstrates the physical connection of the programming cable to a computer and a radio, illustrating how to connect your radio world.
3. Operation
Once the cable is connected and drivers are installed, you can proceed with programming your radio:
- Launch CPS: Open the radio programming software (CPS) on your computer.
- Select COM Port: In the CPS settings, select the correct COM port that was assigned to your USB programming cable (as identified in Device Manager).
- Read/Write Radio Data: Follow the instructions within your specific CPS to read the current configuration from your radio, make necessary changes, and then write the new configuration back to the radio.
- Disconnect: After successful programming, safely disconnect the cable from both the computer and the radio.
Video 2: This video provides an overview of the Tosuny USB Programming Cable, highlighting its features and general use for radio programming.
4. Maintenance
To ensure the longevity and reliable performance of your programming cable:
- Storage: Store the cable in a cool, dry place away from direct sunlight and extreme temperatures.
- Cleaning: Use a soft, dry cloth to clean the cable and connectors. Avoid using harsh chemicals or abrasive materials.
- Handling: Avoid bending or twisting the cable excessively, especially near the connectors, to prevent internal damage. Do not pull the cable by the wire; always grasp the connector when plugging or unplugging.
Figure 4: The cable is constructed from high-quality materials to ensure a long service life and reliable performance.
5. Troubleshooting
If you encounter issues while using the programming cable, consider the following:
- Cable Not Recognized:
- Ensure drivers are correctly installed. Check Device Manager for any error symbols next to the USB Serial Port.
- Try a different USB port on your computer.
- Restart your computer.
- Programming Errors:
- Verify that the correct COM port is selected in your CPS. Sometimes, Windows updates can change COM port assignments.
- Ensure the radio is powered on and properly connected to the cable.
- Confirm that your CPS is compatible with both your radio model and your operating system. Some older CPS versions may require compatibility mode settings (e.g., Windows 7 compatibility mode on Windows 10).
- Check the radio's battery level.
- Driver Issues with Newer OS: If using Windows 10 or newer, and the included CD drivers do not work, search online for updated drivers for the Prolific PL2303HXA chip or similar, as older versions may be phased out.
6. Specifications
| Brand | Tosuny |
| Model Number | Tosunygu5npo0y1g |
| Connector Type | USB (Male-to-Female) |
| Cable Type | USB |
| Special Feature | Tangle Free |
| Product Dimensions | 3.54 x 0.79 x 0.71 inches |
| Item Weight | 52 Grams (1.83 ounces) |
| Compatible Radio Series | BR950, PTX700, PTX760, PTX780, GP140, GP238, GP240, GP280, GP318, GP540, GP580, GP320, GP328, GP329, GP338, GP339, GP340, GP360, GP380, GP640, GP650, GP680, GP960, GP1280, HT750, HT1250, HT1250LS, HT1250 LS+, HT1550, HT1550XLS, MTX150, MTX450, MTX850, MTX850 LS, MTX860, MTX950, MTX960, MTX1500, MTX4500, MTX8250, MTX8250 LS, MTX9250 LS, PR860, PRO5150, PRO5350, PRO5450, PRO5550, PRO5750, PRO7150, PRO7350, PRO7450, PRO7550, PRO7750, PRO9150, MTP700, MTP750, MTP810Ex, MTP850Ex |
| Compatible Operating Systems | Windows 98ME, Windows 2000, Windows 2003, Windows XP, Windows 7 (32/64 bit), Windows 8 (32/64 bit), Vista |
7. Warranty & Support
For specific warranty information regarding your Tosuny HT1250 USB Programming Cable, please refer to the product packaging or contact the retailer from whom you purchased the item. Warranty terms and conditions may vary.
For technical support, driver updates, or further assistance, please contact Tosuny customer service or the seller directly. Provide your product model number (Tosunygu5npo0y1g) and purchase details when seeking support.