Dolphin Quantum Robotic Pool Cleaner (2025 Model)

Introduction

The Dolphin Quantum Robotic Pool Cleaner is designed for convenient and efficient cleaning of in-ground swimming pools up to 50 feet in length. This 2025 model features advanced technology for comprehensive pool maintenance, including a weekly scheduler, anti-tangling swivel, and powerful scrubbing capabilities for walls and waterlines. It utilizes oversized ultra-fine and standard filter bins for superior debris capture.

Figure 1: Dolphin Quantum Robotic Pool Cleaner (2025 Model)

Key Features

• Weekly Scheduler: Program automatic cleaning cycles (every day, every other day, or every 3rd day).
• Anti-Tangling Swivel: Ensures free movement and prevents cable tangling during operation.
• PowerStream Mobility: Provides constant grip on vertical surfaces for effective wall and waterline scrubbing.
• Oversized Filter Bins: Includes both ultra-fine and standard filters for trapping various debris.
• Energy Efficient: Operates with 8X more energy efficiency compared to traditional pressure and suction cleaners.

Setup

1. Unpack and Inspect: Carefully remove the robotic cleaner and all accessories from the packaging. Inspect for any damage.
2. Filter Installation: Ensure the appropriate filter (ultra-fine or standard) is correctly placed within the filter basket.
3. Power Supply Connection: Connect the floating cable from the cleaner to the power supply unit. Ensure the power supply is placed at least 10 feet from the edge of the pool.
4. Placement in Pool: Gently immerse the cleaner into the pool. Allow it to sink to the bottom. Ensure there is enough slack in the floating cable for the cleaner to move freely across the entire pool surface.
5. Initial Start-up: Press the power button on the power supply unit to begin the cleaning cycle.

Figure 2: Gently immerse the cleaner into the pool.

Operating Instructions

Starting a Cleaning Cycle

Once the cleaner is properly placed in the pool and connected to the power supply, press the power button on the power supply unit. The cleaner will automatically begin its programmed cleaning cycle, navigating the pool floor, walls, and waterline.

Using the Weekly Scheduler

The Dolphin Quantum features a weekly scheduler allowing you to automate cleaning. Refer to the power supply unit's controls or the accompanying mobile application for detailed programming instructions. You can typically set it to clean every day, every other day, or every third day.

Mobile Application Control

The cleaner can be controlled via a dedicated mobile application. This app allows for remote start/stop, scheduling adjustments, and manual navigation of the cleaner. Ensure no swimmers are in the pool before operating the cleaner remotely.

Maintenance

Cleaning the Filter Basket

Regular cleaning of the filter basket is crucial for optimal performance. The Dolphin Quantum features an extra-large, top-loading filter basket for easy access.

1. Turn off the power supply and unplug the cleaner.
2. Carefully remove the cleaner from the pool.
3. Open the top cover of the cleaner.
4. Remove the filter basket by lifting its handle.
5. Open the bottom of the filter basket to release collected debris.
6. Rinse the filter panels thoroughly with a garden hose until clean.
7. Reassemble the filter basket and place it back into the cleaner.
8. Close the cleaner's top cover securely.

Figure 3: Man removing the filter basket for cleaning.

Brush Inspection

Periodically inspect the scrubbing brushes for wear and tear. Replace them if they appear damaged or worn to maintain effective cleaning performance.

Troubleshooting

• Cleaner Stops Running: Ensure the power supply is securely connected and receiving power. Check the filter basket for excessive debris that might be clogging the system.
• Cord Tangling: While the cleaner features anti-tangling swivel technology, ensure sufficient cable slack is provided in the pool. Avoid excessive cable length for smaller pools.
• Poor Cleaning Performance: Clean the filter basket thoroughly. Inspect the scrubbing brushes for wear and replace if necessary. Ensure the pool water chemistry is balanced.
• Cleaner Not Climbing Walls: Verify the filter basket is clean and the brushes are in good condition. Ensure the pool surface is not excessively slippery due to algae buildup.

Specifications

Warranty & Support

Warranty Information

The Dolphin Quantum Robotic Pool Cleaner is backed by a 2-year limited quality assurance warranty. Please retain your proof of purchase for any warranty claims.

Customer Support

For technical assistance, troubleshooting, or warranty service, please contact Maytronics US customer support. Refer to the official Maytronics US website for the most current contact information.