1. Introduction
This manual provides essential information for the safe and efficient installation, operation, and maintenance of the FAAC 550 ITT 110549 Electromechanical Actuator. This device is designed for automating gates, offering reliable performance and integrated safety features. Please read this manual thoroughly before proceeding with any installation or operation.
2. Safety Information
Important Safety Instructions:
- Installation and maintenance must be performed by qualified personnel only.
- Disconnect power before performing any service or maintenance.
- Ensure all electrical connections comply with local regulations and standards.
- Keep hands and loose clothing clear of moving parts during operation.
- Do not allow children to play with or near the gate automation system.
- The anti-crushing safety system must be properly configured and tested after installation.
3. Product Overview
The FAAC 550 ITT 110549 is a 230V electromechanical actuator designed for robust gate automation. It features an electronic motor torque adjustment device and an encoder for anti-crushing safety, ensuring secure operation. Integrated microswitch limit switches provide precise control and increased usage frequency.
Image 1: The FAAC 550 ITT 110549 electromechanical actuator, shown in its protective casing. It features a dark grey housing with the FAAC logo and a red indicator light visible on the top surface. The design is sleek and functional, typical of gate automation components.
Key Components:
- Electromechanical Actuator
- Protective Casing with Built-in Ceiling Light
- E550 Electronic Control Unit
- Mechanical Opening and Closing Limit Switches
- Encoder for Safety and Position Sensing
- Timed Courtesy Light
- 10µF 400V Starting Capacitor
4. Specifications
| Feature | Specification |
|---|---|
| Model | 550 ITT 110549 |
| Power Supply | 230V |
| Max Door Dimensions (L x H) | 3 x 2.7 m (4 x 3 m with two actuators) |
| Max Door Weight | 10 Kg/sqm |
| Usage Frequency (cycles/hour) | S3 – 30% |
| Safety Features | Electronic motor torque adjustment, Encoder, Anti-crushing safety |
| Limit Switches | Integrated microswitch for opening and closing |
| Release Mechanism | Internal release, predisposition for external release with personalized key |
| Weight | 100 g |
| Batteries Required | No |
5. Setup and Installation
Installation of the FAAC 550 ITT 110549 actuator requires technical expertise and should only be performed by qualified professionals. Incorrect installation can lead to malfunctions, safety hazards, or damage to the product and property.
General Installation Steps:
- Mounting: Securely mount the actuator to the gate structure and the fixed support according to the specific gate type and manufacturer's guidelines. Ensure proper alignment.
- Electrical Connections: Connect the 230V power supply and control wiring to the E550 electronic control unit. Follow the wiring diagrams provided in the full installation manual.
- Limit Switch Adjustment: Adjust the mechanical opening and closing limit switches to define the gate's travel limits.
- Encoder Configuration: Configure the encoder settings via the E550 control unit for precise gate positioning and anti-crushing safety.
- Safety Device Connection: Connect any external safety devices (e.g., photocells, safety edges) to the control unit.
- Testing: Perform thorough functional and safety tests to ensure the system operates correctly and safely. Verify the anti-crushing system is active and properly calibrated.
6. Operating Instructions
Once installed and configured, the FAAC 550 ITT 110549 actuator operates automatically based on commands from the control unit. Typical operation involves:
- Opening the Gate: Activate the system using a remote control, push button, or other access control device. The actuator will move the gate to the fully open position, stopping at the set limit switch.
- Closing the Gate: Activate the system again. The actuator will move the gate to the fully closed position. The timed courtesy light will illuminate during operation and for a short period afterward.
- Emergency Release: In case of power failure or malfunction, use the internal release mechanism or the external release with a personalized key to manually operate the gate. Refer to the detailed manual for specific instructions on using the release mechanism.
7. Maintenance
Regular maintenance is crucial for the longevity and safe operation of your FAAC 550 ITT 110549 actuator. Always disconnect power before performing any maintenance.
Recommended Maintenance Schedule:
- Monthly: Check for any visible signs of wear or damage to the actuator, mounting brackets, and gate structure. Ensure all bolts and fasteners are tight.
- Quarterly: Test the anti-crushing safety system. The gate should reverse or stop if an obstruction is detected. Clean any debris from the actuator's moving parts.
- Annually: Have a qualified technician inspect the entire system, including electrical connections, motor performance, and lubrication of moving parts if applicable.
8. Troubleshooting
This section provides solutions to common issues. For complex problems, contact qualified technical support.
| Problem | Possible Cause | Solution |
|---|---|---|
| Actuator does not respond | No power, remote control battery low, safety devices activated | Check power supply, replace remote battery, inspect safety sensors (e.g., photocells) for obstructions. |
| Gate stops unexpectedly | Obstruction detected, encoder malfunction, limit switch issue | Remove any obstructions. Check encoder connections. Verify limit switch settings. If issue persists, contact support. |
| Gate operates slowly or with difficulty | Mechanical friction, low voltage, motor issue | Inspect gate hinges and rollers for friction. Check power supply voltage. Contact a technician for motor inspection. |
| Courtesy light not working | Bulb failure, wiring issue | Check the bulb and its connections. If necessary, replace the bulb. |
9. Warranty and Support
The FAAC 550 ITT 110549 Electromechanical Actuator is covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided at the time of purchase or contact FAAC customer support.
For technical assistance, spare parts, or service, please contact your authorized FAAC dealer or visit the official FAAC website for support resources.
