Product Overview
The DV8 Offroad Tail Light Guards are designed to provide robust protection for the tail lights of your 2018-2024 Jeep Wrangler JL (2 & 4 door models) and 2021-2024 Wrangler 4Xe. Constructed from durable 3/16" steel with a two-step proprietary powder-coating process, these guards are engineered to deflect contact from debris and branches encountered during off-road use, safeguarding a vulnerable part of your vehicle.
This manual provides essential information regarding the installation, usage, maintenance, and specifications of your DV8 Offroad Tail Light Guards.
Specifications
| Feature | Detail |
|---|---|
| Manufacturer | DV8 |
| Brand | DV8 Offroad |
| Model | TLJL-01 |
| Item Weight | 9.38 pounds |
| Product Dimensions | 12 x 12 x 12 inches |
| Material | 3/16" Steel |
| Finish | 2-step proprietary powder-coating (Black) |
| Compatibility | 2018+ Jeep Wrangler JL (2 & 4 door), 2021+ Wrangler 4Xe (Does not work with blind spot sensor tail lights) |
Installation
Installation of the DV8 Offroad Tail Light Guards is designed to be a bolt-on process, requiring no drilling. The guards utilize existing factory mounting locations. Please note that the light may sit a minor distance off the body after installation.
For detailed, step-by-step instructions, please refer to the official Installation Manual provided by DV8 Offroad:
Download Installation Manual (PDF)
General Installation Steps (Refer to PDF for full details):
- Preparation: Ensure the vehicle's tail light area is clean and free of debris. Gather necessary tools as specified in the manual.
- Remove Tail Light: Carefully remove the factory tail light assembly by unbolting it from its mounting points.
- Position Guard: Align the DV8 Offroad Tail Light Guard with the tail light and the vehicle's mounting points.
- Secure: Re-install the tail light assembly, ensuring the guard is properly sandwiched and secured using the factory bolts. Tighten all fasteners to the manufacturer's recommended torque specifications.
- Repeat: Perform the same steps for the other tail light guard.
Important Note: These guards are not compatible with tail lights equipped with blind spot sensors. Verify your vehicle's tail light type before installation.
Figure 1: Front view of the DV8 Offroad Tail Light Guard installed.
Figure 2: Angled view showcasing the guard's protective design.
Usage and Protection
Once installed, the DV8 Offroad Tail Light Guards provide continuous protection for your vehicle's tail lights against impacts from trail obstacles such as branches, rocks, and other debris. Their rigid steel construction is designed to absorb and deflect forces that could otherwise damage the factory tail lights.
These guards are intended for off-road and daily driving use, enhancing the durability and rugged appearance of your Jeep Wrangler JL or 4Xe.
Figure 3: DV8 Offroad products in action, demonstrating rugged use.
Maintenance
To ensure the longevity and appearance of your DV8 Offroad Tail Light Guards, follow these simple maintenance guidelines:
- Regular Cleaning: Clean the guards periodically with mild soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the powder-coat finish.
- Inspect for Damage: After off-road excursions or significant impacts, inspect the guards for any signs of damage, such as bends, cracks, or compromised finish.
- Touch-Up Finish: If the powder-coat finish is scratched or chipped, consider using a compatible touch-up paint to prevent rust and maintain aesthetics.
- Check Fasteners: Periodically check that all mounting bolts are secure and properly tightened. Vibrations from driving, especially off-road, can sometimes loosen fasteners.
Troubleshooting
While the DV8 Offroad Tail Light Guards are designed for straightforward installation and reliable performance, some considerations may arise:
- Fitment Issues: Ensure your vehicle is a compatible model (2018+ Jeep Wrangler JL or 2021+ Wrangler 4Xe). These guards are not compatible with tail lights that have integrated blind spot sensors.
- Paint Damage Concern: Some users have expressed concerns about potential paint damage due to the metal-on-paint contact during installation. While the design is intended to bolt to factory locations, it is recommended to apply a protective film or thin rubber gasket between the guard's mounting bracket and the vehicle's painted body if you have concerns about paint integrity. This can help prevent chafing or scratching.
- Loose Guards: If the guards feel loose after installation, re-check the tightness of all mounting bolts. Refer to the installation manual for proper torque specifications.
Warranty and Support
For information regarding the product warranty, please refer to the official DV8 Offroad website or contact their customer support directly. Warranty terms typically cover manufacturing defects.
For technical support, installation assistance, or any other inquiries, please visit the official DV8 Offroad brand store or contact their customer service department.
