Introduction
This instruction manual provides detailed guidance for the safe and efficient assembly, operation, and maintenance of your PERLESMITH Universal TV Stand, model PSTVS09. This stand is designed to provide a stable and adjustable base for most 32-60 inch flat-panel LCD, LED, and plasma TVs, supporting up to 88 lbs.
Please read this manual thoroughly before beginning assembly to ensure proper installation and to prevent damage or injury. Keep this manual for future reference.
Safety Information
- Do not exceed the maximum weight capacity of 88 lbs (40 kg).
- Ensure the TV's VESA mounting pattern is within the supported range (100x100mm to 400x400mm).
- Always use the provided hardware. If any parts are missing or defective, contact PERLESMITH customer support.
- Do not install on unstable surfaces.
- Keep children and pets away during assembly.
- Periodically check all connections to ensure they remain secure.
Package Contents
Before assembly, verify that all components are present and undamaged. Refer to the parts list provided in the original packaging.
- TV Stand Base (Tempered Glass)
- Support Pillar
- TV Plate
- TV Brackets (2)
- Mounting Hardware Kit (various screws, washers, spacers)
- Assembly Tools (e.g., Allen wrench)
- Instruction Manual
Setup and Assembly
Follow these steps carefully for proper assembly. It is recommended to have a second person assist with lifting and mounting the TV.
Step 1: Attach Non-Slip Pads to Glass Base
Carefully place the non-slip pads onto the bottom corners of the tempered glass base. This will protect your furniture surface and enhance stability.

Figure 1: Attaching non-slip pads to the glass base for stability and surface protection.
Step 2: Assemble the Support Pillar and TV Plate
Connect the support pillar to the tempered glass base using the provided screws. Then, attach the TV plate to the top of the support pillar. Ensure all screws are tightened securely.

Figure 2: The main components of the TV stand assembled: glass base, support pillar, and TV plate.
Step 3: Attach TV Brackets to Your TV
Identify the correct screws and spacers for your TV's VESA mounting holes. Attach the two TV brackets to the back of your television. Ensure the brackets are level and securely fastened.

Figure 3: TV brackets securely attached to the back of a television, ready for mounting.
Step 4: Mount the TV onto the Stand
With assistance, carefully lift your TV and hook the attached brackets onto the TV plate. Ensure the TV is centered and stable. Use the security locks to fasten the TV to the stand, preventing accidental dislodgement.

Figure 4: Mounting the TV onto the stand and engaging the security locks for stability.
Video 1: Official PERLESMITH video demonstrating the assembly process for the PSTVS09 TV Stand.
Step 5: Cable Management
Utilize the integrated cable clips on the back of the support pillar to organize and conceal your TV and device cables, maintaining a tidy appearance.

Figure 5: Using cable clips to manage and hide cables along the stand's pillar.
Operating Instructions
Height Adjustment
The PERLESMITH PSTVS09 offers 9 height adjustment positions. You can adjust the TV plate's height on the pillar (11.50" or 15.04") and also use the 3 different hook positions on the TV brackets to fine-tune the viewing height. To adjust, carefully lift the TV (with assistance if needed), reposition the brackets/plate, and re-secure all fasteners.

Figure 6: Visual representation of the various height adjustment settings available for the TV stand.
Swivel Functionality
The TV stand allows for a 60° swivel range (30° left or 30° right). Gently rotate the television to achieve your desired viewing angle. This feature is ideal for rooms with multiple seating areas or to reduce glare.

Figure 7: Demonstrating the 60-degree swivel capability of the TV stand for optimal viewing.
Maintenance
- Cleaning: Use a soft, dry cloth to clean the stand. For the tempered glass base, a glass cleaner can be used, but avoid abrasive cleaners.
- Inspection: Periodically inspect all bolts and screws to ensure they remain tight and secure. Loose connections can compromise stability.
- Weight Limit: Do not place items on the stand that exceed its weight capacity or place excessive weight on the TV itself, as this can strain the stand.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| TV is not level. | Brackets not aligned during installation; uneven surface. | Re-check bracket alignment on TV. Ensure the stand is on a flat, stable surface. |
| Stand feels wobbly. | Loose screws; TV weight exceeds capacity; improper assembly. | Tighten all screws. Verify TV weight is within 88 lbs limit. Review assembly steps. |
| Cannot swivel TV. | Obstruction; stand overloaded. | Ensure no objects are blocking the swivel mechanism. Check TV weight. |
| Missing parts. | Packaging error. | Contact PERLESMITH customer support immediately for replacement parts. |
Specifications
- Model: PSTVS09
- Compatible TV Sizes: 32 - 60 inches
- Maximum Weight Capacity: 88 lbs (40 kg)
- VESA Compatibility: 100x100mm to 400x400mm
- Swivel Range: ±30° (60° total)
- Height Adjustment: 9 positions (via TV plate and bracket hooks)
- Base Material: Tempered Glass
- Pillar/Bracket Material: Steel
- Dimensions (Package): 17.52 x 10.12 x 2.24 inches
- Item Weight: 8.53 pounds
Warranty and Support
PERLESMITH guarantees this product to be free of defects in material and workmanship for a limited warranty period of 5 years from the date of purchase. This warranty covers manufacturing defects and does not cover damage caused by improper installation, misuse, or natural disasters.
For technical assistance, missing parts, or warranty claims, please contact our US-based product support team. You can find contact information on the official PERLESMITH website or through your purchase platform.
For more information, visit the official PERLESMITH Store.