FERMAX WAY-FI COLOR 7" Monitor (Model 1436)

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your FERMAX WAY-FI COLOR 7" Monitor, Model 1436. Please read this manual thoroughly before using the product to ensure correct functionality and safety.

Figure 1: Front view of the FERMAX WAY-FI COLOR 7" Monitor.

Setup

1. Mounting the Monitor

Before mounting, ensure that the necessary wiring is in place. The monitor should be installed at a height that allows for comfortable viewing by all users. Use the provided mounting plate and screws to secure the monitor to the wall.

Figure 2: Mounting plate installation for the monitor.

2. Wiring Connections

Connect the bus wires to the designated terminals on the monitor's connector. Ensure correct polarity. If connecting an electric door opener, refer to the specific wiring diagram for the door opener.

Figure 3: Rear view of the monitor with wiring connections.

3. Powering On

Once all connections are secure, plug the power adapter into a suitable electrical outlet. The monitor should power on automatically.

Operating

1. Basic Functions

When a visitor presses the call button on the outdoor panel, the monitor will ring and display the visitor's image. To answer, press the communication button. To open the door, press the key icon.

Figure 4: Side view of the monitor highlighting control buttons.

2. Adjusting Settings

Access the monitor's menu to adjust settings such as ringtone volume, display brightness, and other preferences. Navigate using the on-screen icons.

3. App Pairing

The FERMAX WAY-FI monitor can be paired with the SeeU app on your smartphone for remote access and control. Follow the on-screen instructions on the monitor and in the app to complete the pairing process.

Maintenance

To ensure optimal performance and longevity of your monitor, follow these maintenance guidelines:

• Cleaning: Use a soft, dry cloth to clean the monitor screen and casing. Avoid abrasive cleaners or solvents.
• Software Updates: Periodically check for software updates through the monitor's settings or the SeeU app to ensure you have the latest features and security enhancements.
• Environmental Conditions: Ensure the monitor is not exposed to extreme temperatures, direct sunlight, or excessive moisture.

Troubleshooting

If you encounter any issues with your FERMAX WAY-FI Monitor, refer to the following common troubleshooting steps:

• No Video/Audio: Check all wiring connections to ensure they are secure. Verify that the monitor is receiving power.
• Door Not Opening: Ensure the electric door opener is correctly wired and receiving power. Check the door opening time setting in the monitor's menu.
• No App Connection: Verify that both your monitor and smartphone are connected to the same Wi-Fi network. Re-attempt the pairing process if necessary.

Specifications

Figure 5: Monitor dimensions.

Warranty

The FERMAX WAY-FI COLOR 7" Monitor (Model 1436) comes with a 3-year warranty from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the warranty card included with your product or visit the official FERMAX website.

Support

For technical assistance, product inquiries, or further support, please visit the official FERMAX website or contact their customer service. You can find contact details and additional resources on the manufacturer's website.

FERMAX Official Website: www.fermax.com